Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
(26 reviews)
Price: $17.02
In Stock
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
Item # 3050-S
Retail:$27.17
Our Price: $17.02
You Save: 37%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (26)
- Q & A (0)
- Photos
2015 Nissan Armada - Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
- Trailer Brake Controller
- Wiring Adapter
- Wired to Brake Controller
- Tekonsha
- Vehicle Specific
Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your 's dash.
Features:
- Pigtail wiring adapter eases installation of your electric brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Wire end connects to the wires on your brake controller with the included butt connectors
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.
To install your electric brake controller you need to connect the four wires - ground, power, brake switch and brake power - of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If you do not have a harness, or you need a new one, the Tekonsha wiring adapter will serve the same purpose.
3050-S Tekonsha Brake Control Wiring Adapter
Replaces 20266
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
Customer Reviews
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan - 3050-S
Average Customer Rating: 4.9 out of 5 stars (26 Customer Reviews)
Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Rick12/29/2019
Could not have worked better! Perfect fit, good heavy gauge wiring with thick insulation. Wires within a "cage" conduit. Plenty of length to allow attaching trailer brake controller anywhere it needs to go. Very pleased with this purchase! In the photo, you can see just a bit of the 3050-s (upper left corner) where it connects to the rest of my "system".
by: Brian06/18/2020
I recently bought the Redarc Tow-pro Elite Break controller and the harness adapter to match my 2018 Armada Platinum. I also choose expedited shipping since I had our first camping trip booked only a few days away! It showed up on schedule early in the day, installation took less then an hour from initially opening the box to completion. The harness adapter made installation incredibly easy, and the redarc control knob looks good mounted (which I was previously worried about installing in my dashboard). I’ve logged several trips already, set up was easy as well as fine tuning the brake intensity. Great product!
by: Nick T04/19/2016
2004 Infiniti QX56
I already had a Tekonsha Voyager Trailer Brake controller which had pigtails. Added this wire harness and four (4) butt splices and I just plugged it into my 2004 Infiniti QX56. Great.
by: Timothy 11/05/2019
2014 Nissan Titan
I recently purchased a 16X6.4 tandem axil trailer and needed to install a good brake controller in my 2014 Nissan Titan for it. I found etrailers web sight and after looking around for a bit found the exact controller I wanted. Their web sight made it a lot easier then I thought and they had everything I needed including the correct harness. I even called just to make sure and the person I spoke to on the phone not only assured me I had the right items but also took my order. The whole process took less then 10 minutes. I received the controller and harness in just a couple days and everything was correct. Installed it in the truck and Walla!! I have brakes on my trailer and they work great. If there is ever anything else I need for this trailer in the future I will be paying these guys a visit.
Thanks
by: Eric 06/29/2020
Worked great. Probed the wires just in case, but the wire colors on the adapter matched the colors on the brake controller. The yellow crimps were a little larger than needed. Had to REALLY crimp them down to hold the larger gauge wires on the adapter.
by: Jerimiah Lemieux07/09/2014
Extremely good quality parts and harnesses. I needed them by a specific day and it was very important that I got these for a camping trip we had planned for months, they were at my door exactly when promised. The sales staff on the phone were especially courteous and patient, also eager to answer my questions and double checked MY order for correct fitment to ensure a perfect experience. I never do these online reviews but I was impressed enough to sit down and do this. Can't wait till I need trailer parts again, I'll shop here without a second thought.
by: Dad07/22/2021
Plug n play on my 2018 Nissan frontier with a redarc tow pro elite.
by: John B11/29/2016
2011 Nissan Titan
The wiring harness I ordered from Etrailer came in a timely manner and it plugged directly into my Nissan Titan. I am very pleased and it has met all my expectations!
by: Joseph 06/19/2020
Couldn't have asked for a more simpler, affordable way to get a brake controller. The OEM ones are way over priced. This connected in perfectly with no hard wiring necessary. If I can install it anyone can.
by: Randy11/03/2017
Nissan Pathfinder
Wire loom didn't go the full length of the wires. Butt connectors are not the correct size. Fit my Pathfinder without issues.
by: Joshua 11/19/2019
Product arrived as described and greatly helped the installation of my brake controller.
by: William M.05/11/2011
Nissan
Easy to install and tremendous savings over buying factory nissan harness.
by: John S.09/01/2016
2016 Nissan Pathfinder
Great product at a great price! It fit my 2016 Nissan Pathfinder perfectly!
by: Juan 07/21/2020
2006 Nissan Frontier
It was what I was expecting.
It did fits well on my 2006 Frontier.
by: Michael07/04/2020
Went together easily. Good directions. etrailer comes through again.
by: MSK03/20/2014
Excellent product and very fast shipping
by: Jeff D08/02/2015
2005 Nissan Xterra
Was just what they said it was. good quality also.
by: Jeff04/21/2021
Great product
by: Frank J01/02/2014
Easy to order. quick to ship. quality product.
by: Gilberto05/14/2019
2016 Nissan Frontier
So far so good all products worked as a dvertised
by: William02/14/2013
Very fast delivery. Many thanks. This is just what I needed.
by: JAMES03/12/2013
worked perfect......easy transaction
by: Phillip12/18/2018
2018 Nissan Pathfinder
Great! Thanks Carol.
by: Heyseed11/10/2020
by: Gary01/13/2021
25
26
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Universal Brake Controller Wiring Kit for 2017 Nissan Titan XDFor your 2017 Nissan Titan XD the brake controller harness you are looking for is the part # 3050-S. This plugs into the portu under your dash and gives you 4 blunt cut wires you can wire to basicaly any brake controller.
view full answer... - How to Install Brake Controller Wiring on a 2004 Nissan ArmadaYou are looking for a 6 pin connector located near the emergency brake pedal. It is usually taped to another wiring harness. You will need a wiring adapter, part # 3050-S to complete the connection.
view full answer... - Where is the Brake Controller Wiring Port on a 2006 Nissan FrontierYour truck should have a port under the dash for connecting the brake control wiring adapter, part # 3050-S. I have added links below to the instructions that are included with the adapter that show the location of the port.
view full answer... - Troubleshooting Reese Pilot Brake Controller Installation On a 2006 Nissan TitanIt sounds to me like the wiring harness for installation of the brake controller may be pinned wrong. First, make sure the you spliced the like color wires from the Pilot brake controller, # 80550, to the wiring harness, # 3050-S, for your 2006 Nissan Titan. Next, make sure you have the correct wiring harness for your truck. Since the connector is plugging into the factory connector on your truck you might just need to re-pin the connector. I attached a photo I edited for you to see exactly...
view full answer...
- Wiring and Display of the Draw-Tight Activator 2 on a Nissan TitanTo attach the Draw-Tite Activator IV, item # 5504, electronic brake controller to your vehicles factory connector you will need a Universal Brake Control Wiring Adapter, Nissan, item # 3050-S. This adapter has four wires that attach color for color to the wires on the brake controller. If you have an adapter that plugs into your vehicle that has five wires then you will have to use a circuit tester, item # 3808 if you need one, and verify the function of each wire once it is plugged in. Attach...
view full answer... - New Install Wiring Harness for Tekonsha Brake Controller in 2012 Nissan FrontierDepends on what brake controller you have, but if you look at the back of your brake controller and you see what looks like an L-shaped connector where the wires all plug into which then plugs into the back of the connector you can simply replace that with the # 3050-P. Otherwise you'd have to use the # 3050-S to hardwire the controller to a connector compatible with your 2012 Nissan Frontier.
view full answer... - Parts Needed to Install Redarc Tow Pro Elite in 2017 Nissan PathfinderIf you have an area that measures 1 inch wide by 1-1/2 inches tall to install the Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob # 331-TPSI-001 it would work well for you, but we don't have a specific fit for this product on your vehicle. It's a very universal design though so it most likely will fit but you'll need to measure. To install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR will require the install harness part # 3050-S in...
view full answer...
- Brake Controller and 7-Way for 2017 Nissan Frontier Without Factory Tow PackageIt sounds like your 2017 Nissan Frontier does not have the factory tow package since you are in need of a 7-way (which is what I believe you are referring to by 7-prong connector) and we do have the parts you need. To start with, you will need to add a 7-way with the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266. I have added a link to an installation video of this harness for you to check out on a '17 Frontier. Then for a brake controller I highly recommend the...
view full answer... - Can The Tekonsha P2 Trailer Brake Controller Be Mouned on Top of Dash Rather Than Down Low? Yes, the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 can be mounted on top of the dash on your 2017 Nissan Pathfinder LT, with the factory tow package. This is quite common on several vehicles which actually place the factory connector behind a panel in the dash rather than behind the drivers area of the dash. Running the Tekonsha Plug-In Wiring Adapter # 3050-P would be rather difficult. Instead you could use either the 34" Pigtail # 7894 or 60" Pigtail # 20160 and then attach...
view full answer... - Recommended Brake Controller Wiring Connector for 2018 Nissan FrontierFor your 2018 Nissan Frontier, I recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. This gives you a clean look and removes the old knee knocker without losing any quality in your trailer braking ability. I recommend using the Tekonsha Wiring Adapter for Electric Brake Controllers # 3050-S. If you want the Curt TriFlex Trailer Brake Controller # C24VV you asked from, then you would use the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51382. Either...
view full answer... - Brake Controller and Install Harness Recommendation for a 2015 Nissan FrontierFor your 2015 Nissan Frontier the recommended install harness to use is the # 3050-S if you are wiring up a brake controller that has 4 blunt cut wires. Or if you go with a Tekonsha controller like the P2 part # 90885 you would want the # 3050-P. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the...
view full answer... - Is Aftermarket Trailer Hitch Safe to Use Over OEM Trailer Hitch for a 2017 Nissan PathfinderYes, even though the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 only uses 6 bolts as opposed to the 10 bolts for the OEM trailer hitch it has gone through an extensive amount of stress tests to ensure that the 6,000 lb trailer towing rating is completely safe. I highly recommend going with this over the OEM for your 2017 Nissan Pathfinder so that you can add some extra components. For a cost-effective brake controller that is reliable I recommend the Tekonsha Primus IQ # TK90160....
view full answer...
- Trailer Hitch and Wiring Harness Recommendation for 2019 Nissan Titan Without Tow PackageI recommend using the Curt Trailer Hitch Receiver # C13304 for your 2019 Nissan Titan because we have found that the Curt hitches tend to have better welds and a thicker powder coat which means they will last longer than other options. For wiring you just need the wiring kit # N40975 as well as the mounting bracket # 18136. If you check out the attached installation video of the 2017 Nissan Titan you can see that the wiring harness you need is on the passenger side of the vehicle near...
view full answer... - Recommended Brake Controller and Wiring Harness Location for a 2018 Nissan ArmadaI recommend installing the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2018 Nissan Armada because it offers both a user-control mode and a proportional mode for varying towing applications plus it installs in such a way that only the control knob will be visible. This combination gives you a great brake controller and a clean looking installation that won't get in the way. The user-control mode is equivalent to a time-delay controller where it brakes at a preset strength...
view full answer... - Recommended Wiring Harness for 2018 Nissan Frontier without Factory Tow PackageFor your 2018 Nissan Frontier, the trailer wiring harness I recommend is the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266. This harness will come with the connections to your factory wiring and also the relays required to activate the factory wiring for proper function. I've attached a video of the install on a 2017 model to assist. This is an easy connection to the factory harness located behind the driver's side rear bumper and passenger side kick panel inside...
view full answer... - Brake Controller Harness for 2017 Nissan FrontierThere is a harness available that will splice into the brake controller and plug into your 2017 Nissan Frontier; the Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan # 3050-S. I've added a link to a video review of this item for you to check out.
view full answer... - Installing Redarc Tow Pro Elite Brake Controller on 2016 Nissan NV 3500 with Factory Tow PackageOn your 2016 Nissan NV 3500 that's equipped with the factory tow package you can use the Wiring Adapter # 3050-S to easily install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. The plug end of the adapter will connect right to the factory port behind the dash of your NV 3500 and the pigtail end will just splice into the wires from the brake controller (color to color). I have attached a short video review of the Tow Pro Elite that you can also check out, along with the...
view full answer... - Wiring Adapter for a 2005 Nissan Frontier and Hopkins Agility Brake Controller InstallationMost likely, the 5th wire is for illumination. None of the brake controllers we sell have this feature. But it is not needed to install a brake controller, including the Hopkins Agility Trailer Brake Controller, # HM47294. The wires on the Reliance brake controller are as follows: White is the ground. Blue connects to the trailer brakes via a 7-Way connector. And Red is the stop light that connects to the switch at the top of the brake pedal. Black is the 12 volt hot lead. The simplest...
view full answer... - Comparing the Tuson DirecLink Base and Lite Brake Controllers DL-100 and DL-50The Tuson DirecLink Base Model Trailer Brake Controller part # 335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part # 335DL-50 are both excellent options The best option for you will be dependent on where you will be doing most of your driving. If you find yourself frequently traveling though town in stop and go traffic then the former which has the low speed brake adjustment feature would be a really good option but not necessarily required. If you are driving in stop and go...
view full answer... - Recommended Brake Controller Harness for a 2009 Nissan Titan With Bare Wires On Brake Controller EndYes, the Tekonsha Wiring Adapter for Electric Brake Controllers part # 3050-S will plug into the tow package port on a 2009 Nissan Titan and then allow you to hardwire a brake controller of your choosing.
view full answer... - Brake Controller and 7-Way Trailer Connector for 2021 Nissan ArmadaYour 2021 Nissan Armada is already prewired for a 7-way and a brake controller. You'll just need a brake controller, a 7-way trailer connector and the relays needed to activate the tow package. For the 7-way, use part # N40975 which provides both a 4 pole and a 7-way. The connector will plug into the US Car connector located under the rear bumper, and includes the needed relays. You'll also need the # 18136 mounting bracket for the trailer connector. For a brake controller, I'd recommend...
view full answer... - Recommended Brake Controller for 2018 Nissan Titan With Factory 7-WayFor your 2018 Nissan Titan I very strongly recommend going with the Redarc Tow-Pro Elite item # RED44FR over the Curt Spectrum item # C51170, which does use Wiring Adapter item # C51382 to connect to your 2018 Nissan Titan. The Redarc Tow-Pro item # RED44FR, which you can install in your '18 Titan with Wiring Adapter item # 3050-S, is by far the superior option because it is not only extremely effective and responsive but its manual control knob makes it simple to use; the Tow-Pro can...
view full answer...
- Recommended Mounting Panel for Redarc Tow-Pro Elite Brake Controller on 2018 Nissan TitanIt sounds like you have the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. There is the Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob # 331-TPSI-001 which is what is recommended for your Nissan Titan. If you don't have wiring harness # 3050-S you will want that. The Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob # 331-TPSI-007 is a custom fit for some Toyota models.
view full answer... - Parts Needed to Add a Brake Controller to a 2012 Nissan MuranoA brake controller will have to be hardwired to a 2012 Nissan Murano since there are no brake controller wiring harnesses designed to fit it. To do this you will need a few parts and the brake controller. First, if your Murano does not already have a trailer connector you will start by installing a 4-Way using # 118653 for the regular Murano or # C59496 for a CrossCabriolet model. Once the 4-Way is installed or if the Murano already has one you would then install # ETBC7 which includes...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Alexander C
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Msk
3/20/2015
It worked great to the day I sold the car