Can The Tekonsha P2 Trailer Brake Controller Be Mouned on Top of Dash Rather Than Down Low?
Question:
2017 pathfinder LT w/ tow package. Can the unit be mounted on the top of the dash? Sort of like cell phone brackets? Do they make longer connection wires? Can you remove the unit if not being used over the winter months without damage to unit?
asked by: Journey
Expert Reply:
Yes, the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 can be mounted on top of the dash on your 2017 Nissan Pathfinder LT, with the factory tow package. This is quite common on several vehicles which actually place the factory connector behind a panel in the dash rather than behind the drivers area of the dash. Running the Tekonsha Plug-In Wiring Adapter # 3050-P would be rather difficult. Instead you could use either the 34" Pigtail # 7894 or 60" Pigtail # 20160 and then attach it to the Wiring Adapter # 3050-S to plug into the factory connector. Having the free end wires will make it much easier to route down your dash either through a small hole or around the dash panel down to the drivers area behind the dash.
The controller includes a Mounting Pocket # 7686 allowing for easier removal and installation when your are not needing the controller.
Products Referenced in This Question
Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 60" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Wired to Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Mounting Pocket for Tekonsha Prodigy Proportional Brake Controller
- Accessories and Parts
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- Tekonsha
more information >
Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System