To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (197 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.Shipping was super fast to NC. My car spend half its life in Fairbanks AK (gravel and sand winters) and half in North Carolina so I didn't have to use a tap and die. I did clean out the bolt holes with brake cleaner and a brush to be 100%. Installation was pretty simple. I put the rear up on jackstands and used a standard 19MM socket to install. After centering and starting the bolts by hand they went in easily. I have an Impact but could only use it on 2 bolts on the passenger side. The rest with a ratcheting wrench. The only tricky part is working around the muffler to get your wrench in. I have a long 50-250 ft lbs torque wrench that worked well on the passenger side but had to take the tire off the drivers side for clearance. A smaller 20-100 ft lbs wrench would fit the space better. This is a reasonable DIY product but absolutely don't skip the torque wrench step. When you think its tight, its not 92 ft lbs tight. PS. don;t mind my pictures my car has some old war wounds.
I recently decided to buy a trailer hitch for my 2003 Toyota Matrix XR. After searching everywhere, and a million phone calls, I finally found exactly what I was looking for on etrailer.com. I found the customer service to be some of the best I have ever dealt with. I was even contacted personally by Cathy T to help answer some questions I had about my purchase. I received my order in about a week. The installation required very little mechanical knowledge. had to tap the rusty bolt holes in the frame of my car, but after that it was very simple to install. Along with the plug and play wiring harness I ordered, the total installation time took well under an hour, and I was literally towing my trailer home an hour later. Id highly recommend etrailer for the quality of product for the price, and the excellent customer service.
Here are the pictures of the hitch just installed this morning on our 2009 Pontiac Vibe. The hitch was very easy to install and we're very satisfied with the quality. Even at 80 years of age, I was able to do the majority of the wiring myself, but did have my step-son do the last wire that had to go underneath and up to the battery. He also bolted on the hitch. He is a mechanic by trade and was impressed with the ease with which the hitch fit and bolted up. All in all, I am very pleased with this purchase and will recommend your company to others.
Again, never question the internet, I have a 2005 Matrix RS, so the age of the car should of told me to buy a tap to tap the frame rails, I didn't buy one and had to wait a week to install because you cant get that M12 x 1.25 tap locally. Other than that it all went very well. The 24812 does make you trim the fascia a bit and the other places too. But I prefer that because the hitch is off the ground more. From the install instructions (Note: Toyota Matrix XRS & XR Sport models have added center fascia that must be removed for hitch installation) Heather at etrailer is the best, I ordered 3 of these by mistake and she cleared it up and got me a discount to boot. Thanks Heather. I will be coming back to etrailer for my X3 hitch, little bit bigger job. I included a picture and that scratch on my bumper was already there.
Thanks to my Daughter!!!
Took a few days to ship after confirmation. Arrived with paint chipped off and scratched up. Must have been from previous shipping, etrailer box was in great condition. etrailer.com sticker was put on upsidedown. Other than a little touch up, product is serving it's purpose.
Very easy installation on my 2003 Vibe GT. Actual installation was less than 30 min, I spend more time collecting my tools and getting the car up onto the ramps than I did installing the hitch. My southern vehicle did not have any corrosion issues with the bolt holes, 30 sec on each with a wire brush in my drill cleaned them out just fine. The receiver sticks out a bit farther under the bumper than I would have liked, but it does not cause any problems for me.
This is the second e-trailer hitch that I have purchase and installed. Hitch came with all required parts and was installed in about two hours. Expanded time on install was caused by the piece that had to be removed prior to install. Hitch itself took about 1/2 hour to install. Complete instruction were included as to how to install. Love these products. With minor modification put the center back on.
Great product and price. It took awile to install as the car was nine years old and the welded in nuts were a little corroded and filled with road dirt. Once cleaned out the hitch installed in just a few minutes. I could not be happier with the finished product unless the receiver could have been a 2" model to fit my bike rack. A 1 1/4 to 2" receiver was purchased after market.
Very easy to install. The only "specialty" tool need is a torque wrench.92 lb ft for all six. But only one down side. The mount for the hitch contacts the bumper (shown in photos). But I can trim the pices of bumper off that it touches. Only reason it not five stars. Going on vacation soon and wanted to bring the bikes along.
Easier to install than I though 2006 Toyota Matrix XR.
Didn't have to jack it up to install.
Also installed the T-One wiring harness only tool needed is a drill with a Philips #2 for the ground wire
Had to remove the lower trim in the back but it looks like it won't be missed. bolts for it are 10mm.
Installation took less than 10 minutes thanks to the 2007 Vibe having pre-drilled and threaded holes for the hitch.
I have bought 2 tow bars from etrailer.com, one for my 2006 Ford Focus from like 5 years ago, and another for my 2004 Pontiac Vibe this past fall. Both arrived on time and were super simple to install. I had trouble installing my Pontiac Vibe tow bar, but that was because the mounting holes on my car were a bit rusted over. I called customer support who walked me through cleaning those out, and I got it installed right away then. Their wiring harnesses are also super easy to install and the directions are clear and concise. I highly recommend etrailer.com for any towing bar and wire harness needs. I now can tow my sailboat wherever I want to go!
The only issue we had was 16 years of rust in the threads on the car. Once the threads were cleaned with a tap the hitch easily bolted on in a few minutes.
I needed a trailer hitch for my vibe.
You had one.
You sent it to me quickly.
It looks good.
I purchased a hitch and wire harness for my 2010 Pontiac Vibe from your company and couldn't be more delighted with the product and easy installation.
I'm 64 years old and had no problems at all.( I did view the installation video ) I believe I spend more time running the power from the battery than the hitch or harness.
Everything works great and because of the harness plugs ( not crimp on connectors ) I expect no future problems.
In this world, It's not to often the advertising matches the product.
Your company is the exception!!! Keep up the good work.
Great products and honest representation. Thank you!!!!
Tom
3/19/2015
thevideo wasEXCELLENT
I ordered my trailer hitch on Sunday and it was delivered on Thursday. After cleaning the rust out of the mounting holes on the frame rails I installed the hitch. Installation took only fifteen minutes. My first time dealing with etrailer.com. It will not be my last. Very satisfied.
Chuck J.
10/17/2017
just a trailer hitch. Does what it was designed to do. Still working fine. Thanks for checking.
2003 Matrix XR
The hitch was delivered quickly and it installed easily as described. I had to tap the weld nuts on the frame prior to installation.
The edges of the hitch push slightly on the molded plastic fascia of the bumper but no trimming of the bumper was required.
Looking forward to getting a hitch-mounted bike rack!
Rey
11/21/2012
Im planning to buy one to I got xrs what kind you got its ok not to trim spoiler thx
Steve H.
11/28/2012
Rey: i have an XR. i think with the extra trim on the XRS you might have to cut the plastic - I cant be sure but I think so.cheers
The product arrived as expected and in good condition. The kit takes 15 minutes to put on once you have the weld nuts cleaned out. WD-40 and a wire brush were not sufficient to clean out the weld nuts. I bought a M12 x 1.25 tap. I ran this through each nut once and it allowed for easy threading of the bolts. It would be nice if the tap was included with the hardware or offered as an option to buy. Unless the car is brand new, the tap is what is needed to make this a quick and stress free install. Despite having metric and English tap sets I had to special order this not so common tap to do the job.
Matt M.
8/14/2017
Still working fine. No issues
Unbelievably Fantastic! Ordered Sun at 2pm, order shipped at 4:32pm, delivered Wed 2:02pm, installed by 4pm.
And it also contained the correct grade 8 washers, unlike the other hitch I ordered thru another site for our other SUZ.
FANTASTIC service! Great job!
Mark
11/23/2018
Working great!!! No problems at all!
If your car isn't brand new I highly suggest getting an M12 1.25" tap, without it I would never have been able to put the bolts in. They were far too rusted and filled with gunk.
Otherwise the product itself works as it should and is a pretty good deal.
For etrailer.com I would just include an M12 1.25 tap as most people have brought this same issue up. Up the price a couple bucks and you can break even on it.
Victor A.
6/9/2017
So far so good, after one year of use everything seems to be working perfectly fine.
We needed to add a trailer hitch to our little car for a bike rack. This was exactly what we needed at a good price. Thank you!
I have not been able to install the trailer hitch as the holes in the car frame are too rusted and not usable. If I could return the etrailer, I would do that.
Heather A.
8/30/2017
I have attached some links below that will help you clean the weld nuts on your vehicles frame.
It went on without a hitch (see what I did there). Seriously! Four bolts and run the wiring where it belongs. I did it at night with a headlamp and it worked flawlessly. A year later, it’s still tight and the wiring is solid. Thank you for a seamless and painless experience!
Bobby
4/15/2019
Still works perfectly 2 years out!
Installation was fairly easy. The hitch will fit the XR model after removing the rear spoiler. Hitch fit correctly but came with bolts that were one size too large. I would have left the Draw Tight and etrailer stickers on the hitch but they were put on crooked so I peeled them both off. Overall good product and great experience with etrailer.
Mike L.
6/20/2019
Rather than sending the wrong hardware, what typically happens is that the nuts welded into the frame members get clogged up with road debris and corrosion, which makes the installation hardware difficult to install. The hitch should have arrived with M12x1.25x40mm bolts. If the threads were severely corroded, a thread tap is recommended to clean them. Id urge you to confirm that youve used the correctly sized hardware.
Good fit. Had to ream the factory threads for the bolts to work but once that was done, easy bolt in. I have an XR model so I had to notch the lower valance. Looks good, just a little tight installing the receiver pin.
Goody
9/5/2018
Thanks for the follow up, George. Both the receiver hitch and wiring have been working great! I am very happy with my purchases. Thanks.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
5/9/2022
Customer Service will reach out to you.