Replacement Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1

See what our Experts say about this Thomas Payne Accessories and Parts

• Troubleshooting Thomas Payne Seismic Series Recliner That Wont Recline
  I'll start off by saying that the Replacement Cup Holder # 195-387597 is designed for the Momentum series recliners and will not control the opening and closing of your Seismic series sofa seating. Unfortunately we do not have an available cup holder replacement for the Thomas Payne Seismic Power Reclining Sofa. But there are some things we can try to get your sofa back in working order. Lippert, who manufacture the Thomas Payne sofas recommend first unplugging the units and letting them...
  view full answer...
• Troubleshooting Thomas Payne Recline Power Issue
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that it is properly running and is not the issue. I would then check the cup holder # 195-387597 and the wiring connection because that controls all the functions as a built in wired remote to the control box. Then I would check the connections to the control box # 195-387596. Finally I would check the 12V power cord # 195-387595. There are no external fuses...
  view full answer...
  
• Troubleshooting Thomas Payne Momentum Recliner Not Closing
  It sounds like the issue may be in the control box. There is a way to troubleshoot the control box and that is by switching the control boxes from each recliner to the other. If the recliner that does not close now, closes with the opposite control box and vice versa, you will need to replace that control box. You will need the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387596 to correct the problem.
  view full answer...
• Who Makes Thomas Payne Recliners? Is There A Manual Release For The Footrest?
  What you have there is a Thomas Payne brand Recliner which is made by Lippert Components. I am not aware of a manual release for the foot rest. A lot of times issues like this are the result of a bad control box. This would not be something we carry here at etrailer. Your best bet would be to reach out to Lippert directly.
  view full answer...
  
• Light Went Out on Thomas Payne Cupholder
  According to Lippert, the manufacturer, if the light went out on the cupholder, that generally means the connection is poor at the plug, so you'll want to check that. To do so, remove the rubber coaster from the bottom of the cupholder, and using a Phillips screwdriver, remove the screws securing the cupholder to the recliner, then pull out the assembly and unplug it from the control box and connectors. If it needs replacing the correct one, depending on what you have, is one of the following: -...
  view full answer...
• Troubleshooting A Thomas Payne Recliner that Won't Retract
  What you can first try, if you have not already, is unplugging and plugging back in the sofa. You'll want to make sure to wait at least 10 minutes before restoring power. It also wouldn't hurt to check the wiring as well, and make sure you're checking for pinched wires or any broken/frayed wires. It is possible that the cupholder has gone bad. Since the cupholders control the functionality on the chairs, you can try and unplug the cupholder and checking to see if it works. If not, you...
  view full answer...
• How To Remove Old Cup Holder In 2021 Momentum 320G To Install Replacement Cup Holder 195-387597
  To remove the Replacement Cup Holder # 195-387597 In your 2021 Momentum 320G you need to twist the top ring to remove it, and that will reveal 3 screws to be removed allowing you to completely remove the cup holder and replace it with the new one.
  view full answer...
• Troubleshooting Thomas Payne RV Couch Cupholder Buttons Flashing
  Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring. Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem...
  view full answer...
• Troubleshooting Functions Not Working on Thomas Payne Momentum RV Dual Reclining Sofa
  There are a few possibilities as to why only one side of your Thomas Payne Momentum RV Dual Reclining Sofa is acting up (or not acting up at all in your case). There are 3 components that allow the recliner to operate the lights, massage, and heater. These are the Cup Holder # 195-387597, Control Box # 195-387596, and the 12V Power Cord # 195-387595. To determine which of these components needs to be replaced simply try using parts from the side that is working. Start off by swapping...
  view full answer...
• Help Finding Notch to Remove Thomas Payne Cupholder
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related...
  view full answer...
  
• Is My Thomas Payne Recliner The Momentum Series Or Seismic Series?
  The best way to determine if you have the Momentum or Seismic Series recliner is to look at the buttons on the Cupholder. The Momentum series should have only 3 buttons on the cupholder for light, massage and heat. The Seismic series will have 5 buttons. Light, open, close, massage, and heat. I have included pictures of both below for your reference. It sounds like yours does have all 5 functions on the cupholder controls, which would mean yours is the Seismic Series. If the the controls...
  view full answer...
  
• Troubleshooting Thomas Payne RV Recliner Where Power Functions Stopped Working
  Try removing the good working cupholder and installing it on the side that isn't working. Most likely that will fix the issue and indicates that you need a new cupholder like with the part # 195-387597 that you referenced.
  view full answer...
• Troubleshooting Thomas Payne Recliner Power Issues Where Nothing Works
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that isn't the issue. Next, I recommend checking the Cup Holder # 195-387597 and it's wiring connection because that selects the functions as a built in wired remote to the control box. Next check the connections to the control box # 195-387596 itself. Finally check the 12V power cord # 195-387595. There are no external fuses or circuit breakers that would...
  view full answer...
• Determining if Cupholder or Control Box is Preventing Thomas Payne Couch from Functioning
  While the lights might still work for the functions on the cupholder that actual switches in the cupholder may not. If you haven't already I would try swapping the cupholders to see if that makes a difference or not. If it's not the cupholder like the part # 195-387597 it's probably the power control box like the part # LC36FR which is for the Seismic line. You can try swapping those too to see if that allows the one side to work. If it is the control box hopefully you do have a Seismic...
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Has Lights That Don't Turn Off
  Since you mentioned you've already replaced your cupholder # 195-387597, and your power cord # 195-387595, I suggest you try to reset the chair if not preformed already. You'll want to unplug the unit from power, and let it set for about 10 minutes. Then plug the unit back into power, and check for functionality. If that doesn't fix it, then since you've already replaced your power unit and the cupholder, you'll more than likely need to replace the control box # 195-387596.
  view full answer...
• How to Remove Cupholder From Thomas Payne Momentum Recliner
  If you need to remove one of the cup holder assemblies on your Thomas Payne Momentum Recliner you can do so by first locating the notch on the side of the cup holder that you should be able to feel with your hand. Then it's just a matter of using something like a flathead screwdriver to pop up the cup holder using this notch. Once the unit is popped up from its recessed opening there will be 2 screws revealed that need to be removed before you can completely detach the cup holder wiring...
  view full answer...
• Troubleshooting Thomas Payne Heated Sofa Where Heat Function isn't Turning On
  You could test the wiring of the heating pad with a circuit tester like the part # PTW2993 to see if there is voltage to it when the heating function is on. If you are getting voltage but the seat isn't heating you'd want to replace the heater with part # 195-000113 like you referenced. If its not the heating element its most likely the cupholder which controls the activation of the pad which is part # 195-387597.
  view full answer...
• Thomas Payne Theater Seating Automatically Reclines Back
  The issue you are experiencing with your Thomas Payne Theater Seating could be either the control box or cup holder. In order to determine which is the issue you will simply need to swap out one side for the other and see if the problem continues on that side. If you have the momentum series then the part number of the control box is part # 195-387596 and the part number for the cup holder is part # 195-387597.
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Will Not Recline
  For your Thomas Payne dual reclining loveseat, there could be a number of reasons why your recliner will not recline any longer. Lippert, the manufacturer of these recliners, has recommended you first unplug the unit from power, and let it sit for around 10 minutes. Sometimes a simple turn off, turn on fix is all that is needed to fix an issue. Another thing you can do is swap the cup holders, and see if the functions change on the chairs. If the left side works with the other cup holder,...
  view full answer...
• What Does Plug on Thomas Payne Momentum Reclinder Connect to
  Thank you for the pictures. I spoke with my contact at Lippert and he said that the connector you are showing on your Thomas Payne Momentum recliner is what connects to your cup holders, like part # 195-387597, for controlling the heat, massage, and LED lights. Once you connect that to the wire from your cup holder you should be able to use the features on your recliner.
  view full answer...
  
• Replacement Cupholder And Controller For Thomas Payne Momentum Recliner
  Your best bet will be to get the Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597, since the plastic cover is not available separately. This will be a direct replacement for the cupholder with the heat, massage and LED buttons. Since the heat does not function, this is likely due to a bad controller. For a replacement controller you will need the Replacement Control Box # 195-387596, which will be a direct replacement for your momentum recliner.
  view full answer...
• How To Tell If I Need To Replace The Cup Holder Or Control Box On A Thomas Payne Momentum Recliner
  From what you are describing, you have a short in one of two places. First is the cup holder # 195-387597 that has the controls for these functions and would explain the odd things it is now doing. However, it could also be the control box # 195-387596. The best way to find the culprit is to remove the cup holder from the side that is working properly and plug it into the side that is misbehaving. If this fixes everything, you will need to replace your cup holder with the # 195-387597....
  view full answer...
• Troubleshooting Thomas Payne Recliners Blue LED Lights are Stuck On.
  First you will want to unplug the main power unit going into the back of the Thomas Payne recliner. Next you will want to relocate the connector and check to see if any of the prongs may be bent or damaged in the connector. Be sure to check both sides of the connector for any damage. Clean and apply a small amount of Dielectric Grease # 11755 to the connector on the Cup Holder # 195-387597, then plug the connector back in. Be sure to check any other connection in the same manor to ensure...
  view full answer...
• How Does Thomas Payne RV Sofa Cupholder Remove
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm.
  view full answer...

Do you have a question about this Accessories and Part?