Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(441 reviews)
Price: $202.76
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13514
Retail:$357.95
Our Price: $202.76
You Save: $155.19
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (441)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13514
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- CURT
- 400 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13514 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2015 Nissan Xterra
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13514
Average Customer Rating: 4.9 out of 5 stars (441 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: David07/26/2020
2010 Nissan Xterra
I totally bought from etrailer because of all the "How To Install" videos. I bought hitch #13514 and light kit #118525 both from etrailer. Install could be a one-person job, but I would recommend two-person. Installed hitch and light kit in about an hour with two-people. After install I added a self-adhesive Diamond designed rubber matt on the hitch step, this avoided any foot slips. I bought the rubber matt from Harbor Freight. I think etailer should make this an enhancement to the hitch. I also used velcro straps to keep wiring tucked away until needed, also purchased from Harbor Frieght. Both hitch and light kit are very well made, not cheaply made. I am very satisfied with the product.
by: Vince. .03/08/2024
Thanks for asking. Got the hitch today. Looks like everything is here. And in good condition. I'm amazed how easy it was to look up and order and how fast I got it. May not install for a few days or week or so. But I will send pics and give update when complete. U guys have a great weekend . Thanks!
by: Peter G.03/05/2017
2013 Nissan Xterra
I ordered this for my 2013 Nissan Xterra S. This product shipped to my address quickly and undamaged! The instructions for installation were easy to follow and clearly indicated what tools were necessary to get the job done right. Not only this, but I watched a YouTube video to confirm the proper installation of this on my 2013 Nissan Xterra S.
Installation was possible by myself, but to make things easier I had someone help hold one side of the hitch receiver so I could quickly lock the bolts into place. I did end up needing to lower the muffler and completely detach the spare tire to install this. Total time was about an hour without using any power tools.
The product was a PERFECT FIT and looks great!! Haven't used it to tow anything yet and am happy it doesn't stick out too far. I highly recommend this to anyone looking for an affordable hitch receiver that is made of quality materials and looks "natural" for their vehicle. If I had to, I would but this all over again.
Peter G.
3/7/2018
The hitch is in great condition after a years worth of use. I have only used it to attach a hitch cargo carrier which I use when I drove on the beach all last summer. After a summers worth of weekends driving on the beach, the hitch has stood up to sea salt and doesnt show any signs of erosion or major wear
by: Amer A.04/10/2017
2015 Nissan Xterra
I had the hitch for about a year now. The assembly process was easy and straight forward, just remember to loosen the exhaust brackets as instructed. I feel that the powder coating is not top quality as I already have lots of rust spots on it. I may need to take it out and send it for re-powder coating at a local shop.
The step on top is sometimes useful but most of the time annoying because you can't reach underneath it to unlock the pin.
It's not an expensive tool but it has it's disadvantages
Amer A.
8/7/2018
I have used it constantly to tow a boat about 2500lb and sometimes up to 3000 lb with stuff in the boat. No drama at all as it performs flawlessly. I have grown to like the step more as I put stuff on the roof of the vehicle. Maybe in a year or so it will need another powder coating but good product never the less
by: Victoria05/31/2016
2012 Nissan Xterra
Worked great. See the bike rack attached to it! My mechanic put it on and said it was the easiest hitch he has ever put on! Great price. Worked like a charm.
Victoria
1/23/2018
Thanks for your follow up. Unfortunately I had mechanical issues with my SUV and no longer have it. For as long as I had it the hitch worked well and I had no problems.
by: Brad D02/03/2020
Trailer hitch was easy to install. Works great for the two uses I had: pulling a lightweight trailer and receiver hitch rack and bike carrier. Only complaint with the Curt manufactured hitch is that the receiver shaft is too short to allow room for the locking pin to fit (as you see in the pic).
So far so good.
by: Bret D.02/14/2019
2011 Nissan Xterra
After foolishly selling my OEM Nissan receiver hitch I was in the market for another quality part. I poked around the web and saw Curt had great reviews, and I had seen the name over the years. I read a bunch of the reviews here and decided that this was going to be my replacement receiver. Shipping was free, and quick. The box arrived in great condition as did the receiver.
Install was a breeze, I had removed my OEM one months prior to installing this so the bumper bolts weren't difficult to remove at all. However, if you haven't removed your bumper bolts I HIGHLY recommend spraying them with some form of penetrating lubricant to help break them free. A breaker bar or air impact gun might be useful as well. Total install time was under 30 minutes. I didn't have to remove my exhaust hangers or bumper, just carefully slid the passenger side up and over the exhaust. I did place a t-shirt over the exhaust pipe to prevent scratching the brand new powder coat of the receiver. The bolts provided worked perfectly and the fitment of everything was great when all was said and done.
I did add some non-slip grip tape strips on the step portion of the receiver to prevent a fall when standing on it when wet. Check out my pictures to see how I applied them.
This was my third order from etrailer over the years and their level of customer service is top notch, which is why I keep coming back!
by: Greg S.10/01/2016
2007 Nissan Xterra
Only took a couple hours to install by myself on my 2007 Nissan Xterra, including wiring etc. I added grip tape to the flat area on top of the Hitch opening so that it's safer to use as a step in rainy or muddy conditions.
The installation video is a big help but it slightly conflicts with the paper instructions that come with the package. The video showed a flat washer being added in between the mounting bracket and truck frame at the smaller (M12) bolt hole. However, no flat washer is included in the kit nor is one required by the instructions for that bolt. The conical washer is used under the bolt head like normal, do not put it between the bracket and frame!
by: Keith12/31/2018
2013 Nissan Xterra
This is my second Curt hitch. Installation is pretty easy with 2 people. With a little manipulation, it can be installed without dropping the exhaust. I was even able to make the mounting box work for a clean finish with a couple custom drilled holes. I would give it 5 stars but there was a bolt missing, so I did have to reuse one of the factory bolts.
by: Bob K.09/04/2011
It took me about two hours to install this hitch including wiring. The instructional video on the website covers everything you need to know to get the job done with a minimum of stress. (You'll need some half inch tools and a torque wrench.) I had a friend help me get the hitch into position to bolt in. Doing that alone is probably possible but I wouldn't want to do it, it's a snug fit. All in all my experience with etrailer.com was great. Shipping was quick and free and the product was top notch.
by: Dave D.04/11/2016
2015 Nissan Xterra
The trailer hitch installed nicely on my 2015 Xterra. The wiring (that I also purchased from e-trailer) was pretty straightforward and easy to install. Ditto for the electronic brakes I added. The only issues I encountered were (1) the electronic brake socket had no bracket, so I had to fabricate one from a piece of aluminum to bolt under my bumper, and (2) the little step above the 2" receiver hitch on the Curt product was smooth and slick; I added a $2 adhesive-backed rubber diamond-tread that I cut to shape, and it solved the problem. It looks like OEM equipment. I'm very pleased.
Dave D.
4/11/2017
The hitch is as strong, rugged, and good looking as I am. Well. ok, its as strong, rugged, and good looking as the day I installed it. Its used regularly to haul a 3,000lb trailer with a 354lb tongue weight. No issues, no problems good stuff!
by: James C08/02/2013
2006 Nissan Xterra
Super Easy to install. Lowering the spare tire and loosening the exhaust hanger made the hitch go right in. I was more impressed with the customer service of eTrailer.com. I wish all internet buying was this easy. I never had to investigate where my order was because I was sent instant notifications when the order was received, and when the order was shipped, and a follow up email after I received the hitch.
by: Dan T.01/25/2014
2008 Nissan Xterra
Product arrived much sooner than expected in great condition. Kudos for etrailer.com for the swift shipping. Installation was as described in the included instructions and the PDF provided on-line. With one person helping, we got it installed in less than an hour. Looks great with the color of the Xterra.
by: David F.06/04/2017
2013 Nissan Xterra
Hard to believe you can get such a heavy-duty piece of equipment for such a reasonable price. I installed it on my 2013 Xterra mainly to allow for a bike rack but also to haul trailered small equipment. The hitch fits perfectly and bolts up as directed and is essentially "easy" to install although I add two comments to consider. 1) At least in my vehicle, undoing the rear exhaust mounts didn't do much since there is little give between the tail pipe and the muffler. I don't think you really have to do that. 2) Get a buddy to help get the hitch in place. The fit is perfect so both ends have to go in together. Overall - excellent product!
David F.
6/4/2018
Perfect!
by: Jean01/25/2012
2010 Nissan Xterra
The item was shipped and delivered quickly. I did the installation with one helper and it went well. The fit was fine, it was just a little tricky to get it into place. It is a snug fit and all the mounting holes lined up correctly. I did not modify the hitch as some other reviewers said they did. My installation took about 2 - 3 hours. Be sure you have the proper tools and torque wrench.
by: Doug B.10/03/2011
2008 Nissan Xterra
I recently purchased a receiver hitch for my 2008 Nissan Xterra from you. I was amazed how easily the receiver was to install. Instructions were easy to comprehend as well. Thanks for carrying products relevant to your customer's needs and having products that work right. I have attached some pics from the finished install. I will be ordering accessories as I need them from your company as you have always been prompt, thorough and very courteous in all of your correspondence.
by: Jeremy 05/27/2023
Great quality! Installs in less than 20 minutes! Anyone can install. Remember to buy the wiring harness (2 pieces) one plug in by the spare tire and other on the passenger front kick panel.
by: HUMPREY01/22/2013
2012 Nissan Xterra
Shipping was fast and product was very well packaged. Installation was very straight forward. It says that the muffler was needed to be moved or removed but I did not have to in my case. I just went under and placed and aligned the hitch and bolted it in place. I was done in less than 30min. Thanks again etrailer
by: Brad S.08/02/2016
Very simple install, plug and play electrical connections, very simple to use and very good quality product. Very happy it was put on in PA on Friday afternoon and hauled a trailer to GA Saturday morning. Had 0 issues. Definitely a 5 star rating
by: Stephen06/12/2020
Awesome product and the video links were a extreme help. Fit and finish are great,and the hitch appears to be very rugged. Also got the wiring kit for the car and it was a breeze to install. Anyone with any mechanical ability can install this.
by: Dan B.04/05/2017
2014 Nissan Xterra
Excellent product! Went together as described on the youtube video. Took me about an hour. Make sure to use a torque wrench and tighten to specs.
by: Cynthia 10/04/2022
We just had to bend it a bit to get it to fit.
Cynthia
10/7/2023
It has been wonderful!
by: Bryan 06/30/2023
Very nice beefy hitch receiver. The finish is better than that of my truck.
by: Jorge H Hoyos06/21/2016
This was an awesome product. I teally im happy with it. I especially liked how easy it was to install and how easy the instructions were to follow. Outstanding. I would not hesitate buying another one when the time arises. And I will recomend it to all of my friends.
by: Fernando S02/16/2017
2007 Nissan Xterra
MR. GEORGE! MUCH THANKS! HAD THE GARAGE COMPLETE INSTALL. FANTASTIC! FERNANDO SANTOS USN RETIRED DAV
25
459
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Parts Needed to Tow Trailer with 2008 Nissan XterraFirst lets start with the hitch. For that the Curt hitch part # 13514 is a confirmed fit that would work well with plenty of capacity. I attached an install video for more info as well. For trailer wiring you then would want the 7-Way kit part # C56226 which is a confirmed fit. Video for this as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup....
view full answer... - What Do I Need to Equip My 2007 Nissan Xterra to Tow a Boat?Typically, a boat trailer with brakes will have a hydraulic coupler. If this is the case, you will not need a brake controller. For a hitch, I would recommend the Curt Class III Trailer Hitch Receiver part # 13514. The ballmount needed will depend on the height of your boat trailer coupler when it is level. We have an online FAQ page that demonstrates how to correctly measure for the necessary rise or drop your ballmount will need. A 2 inch ball is the most common size, such as part # 19258....
view full answer... - Recommended Kayak Racks for 11-1/2 Foot Long and 85-lbs Kayaks on 2006 Nissan XterraI have a solution for you, but I was able to determine from my research that the 2006 Nissan Xterra roof has a capacity of 150-lbs, so adding a kayak carrier and 2 kayaks that weigh 85-lbs each would put you over capacity of your roof. Your best solution for carrying kayaks of that length and weight would be using a kayak trailer like the Malone EcoLight # MAL43FR, which comes with extra wide kayak carriers that will fit a variety of different style boats. If you don't already have a...
view full answer...
- Replacement Hardware for a Curt Trailer HitchWe have exactly what you need. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. This will give you all of the bolts and washers your hitch requires for install. The bolts will be of the correct grade too so you won't have to worry about a parts failure due to a cheap grade bolt. You will need to know your Curt hitches part number. I checked with Curt and the only hitch they have listed that fits a 2012 Nissan Xterra is the item # 13514 you were looking at. When...
view full answer... - Complete Towing Package For A 2010 Nissan XterraI do have trailer hitch receiver options that will work for your 2010 Nissan Xterra however, none of the trailer hitch receivers that are a confirmed fit for your 2004 Nissan Xterra will also fit the 2010 Nissan Xterra. For a trailer hitch receiver that is compatible with a 2010 Nissan Xterra, I recommend using the Curt Trailer Hitch Receiver part # 13514 over the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75291 as the Curt Trailer Hitch Receiver is rated for a high capacity in...
view full answer... - Hitch for 2009 Nissan Xterra for Carrying Motorcycle CarrierThe highest rated hitch we offer for your 2009 Nissan Xterra is the Curt # 13514 which has a tongue weight rating of 400 lbs. This would leave you with 80 lbs for the weight of your carrier since your motorcycle weighs 320 lb. Rear suspension enhancement like the SumoSprings kit part # SSR-210-47 would be a great option since that will be a lot of additional weight on your rear suspension.
view full answer... - Does Curt Trailer Hitch 13514 Come with Installation Hardware for a 2011 Nissan XterraYes, the Curt trailer hitch # 13514 includes all of the necessary hardware for installation. I have linked the instructions and a video showing a typical installation for you. If you plan on doing some towing I also recommend etrailer ball mount kit # 989900, It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer wiring, if needed, use # C56225. I have linked instructions and a video for the wiring as well.
view full answer... - Recommended Trailer Wiring Harness for a 2006 Nissan XterraThe Curt Trailer Hitch Receiver part # 13514 is a great option for a 2006 Nissan Xterra and what I recommend using. It offers a bolt-on install with no drilling required. In order to complete your towing setup you'll also need a trailer wiring harness for which I recommend the Curt T-Connector Vehicle Wiring Harness part # C56225 for a 4-way or part # C56226 for a 7-way. If you opt for the 7-way you'll also need a way to secure it and for this I recommend the Mounting Bracket part # PK12711U...
view full answer... - Trailer Hitch, Wiring, Brake Controller and Accessories for a 2011 Nissan XterraFor your 2011 Nissan Xterra Curt hitch # 13514 and wiring harness # 118266 will work just fine. Brake controller and harness # C24VV and # C51515 are also going to work just fine. But instead of using # ETBC7 you would use # 5506. this is because you do not need all of the stuff included with the ETBC7. You will still need to route the brake controller blue output wire to the back of the 7-Way, attach it to the back of the 7-Way in the 7 o'clock position. Remove the wire that is already...
view full answer... - Trailer Hitch Fit for a 2014 Nissan XterraYou are going to need to install a new hitch on your 2014 Nissan Xterra. The vehicles are different enough that the hitch fits from one do not apply to the other. The most popular hitch option we offer is the Curt part # 13514 which is confirmed as a fit for your Xterra. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop...
view full answer... - Hitch That Has Rating As High As Factory Hitch 2005 Nissan XterraThe rating of aftermarket manufacturers could be lower than a factory option for a couple of reasons. This could be the size and design of the hitch to accommodate the frame of the vehicle, spare tire location, or factory mounting points. The Curt Trailer Hitch Receiver Item # 13514 is a great option for an aftermarket hitch for the 2005 Nissan Xterra. With use of Weight Distribution, the Curt hitch rating is increased to 600 pounds tongue weight, and 6,000 pounds for gross tow weight.
view full answer... - Would Trailer Hitch From 2001 Nissan Xterra Fit 2006 ModelThere was a big enough difference between the 2001 and 2006 Xterra that a new hitch had to be made. So the Curt # 13514 that you mentioned would work for your 2006 Nissan Xterra and would be what you'd need.
view full answer... - Trailer Hitch and Wiring for a 2015 Nissan Xterra to Tow Small Utility Trailer with 4-Pole ConnectorI will be happy to make some recommendations for your 2015 Nissan Xterra. First, for a trailer hitch, Curt hitch # 13514 is a very popular option. This is a Class III trailer hitch with a 2 inch receiver. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not...
view full answer... - How to Carry Kayak & Cargo on 2015 Nissan XterraAppreciate the photo of your 2015 Nissan Xterra (not to mention the view), and while there is a way for you to carry cargo along with a kayak, it isn't possible to add both on your factory roof rack because the bars simply aren't wide enough. Your Xterra has 32 inches of crossbar space and there isn't a roof bag or cargo box narrow enough to go with a kayak carrier. So what I recommend instead, seeing as how you have a trailer hitch receiver like the Curt # 13514 is a hitch-mounted cargo...
view full answer...
- Could a 2001 Nissan Xterra have a 4-Way Hardwired to it Using Trailer Connector PortSounds like you are wanting to hardwire a 4-way to the trailer wiring harness on your vehicle. The only way to know the function is to test the wires with a tester like part # PTW2993 like what you see in the video I attached a link to. Since the trailer wiring harness for your 2001 Xterra like the part # 118244 does not have a converter in it the circuits would easily be ready to be hardwired to a 4-way.
view full answer... - Locking Hitch Pin Recommendation for a GMC Sierra 1500I would recommend you go with the Curt locking hitch pin part # C23519. This is confirmed to fit the 2 inch hitch on your GMC Sierra 1500. Class I and II are 1-1/4 inch hitches that typically require a smaller hitch pin. The Class III, IV and V are 2 inch hitches and the same length locking hitch pins will work. I attached an FAQ article on hitch classifications for you to check out also as well as a review video for the # C23519.
view full answer... - My Trailer Hitch Does Not Appear To Fit Due To The Bracket Being BentI will start by saying the Curt # 13514 hitch is a fit for your 2007 Nissan Xterra, so you definitely have the correct part. As to the flange not sitting flush like it should, this is actually a fairly common occurrence with hitches. The frame brackets on hitches are a mild steel so they can flex with the frame of your vehicle when it twists over bumpy terrain. This is intentional as if it was too hard a steel, it would end up breaking. So all you need to do is bend it back into place. There...
view full answer...
- Gaining Exhaust Clearance to Install Curt Class III Receiver Part # 13514 on 2007 Nissan X TerraHave you temporarily lowered the exhaust as shown in the instructions? If so, and you cannot get enough clearance, follow the exhaust toward the front of the vehicle, to locate the next exhaust hanger. Making sure the exhaust is supported, remove the next hanger. This should give you additional play in the exhaust and allow you to raise the hitch into place.
view full answer... - Does Curt Wiring Harness Work for 2007 Nissan Xterra Without Factory Tow PackageYes, even without the factory tow package on your 2007 Nissan Xterra you will be able to install and use the Curt T-Connector Vehicle Wiring Harness # C56225. If you also need a trailer hitch for your 2007 Xterra, the hitch I recommend due to it having the best clearances and strongest capacity is the Curt Trailer Hitch Receiver # 13514.
view full answer... - Mounting Bracket for a 4- or 7-Way Trailer Connector on a 2013 Nissan XterraYes, you can attach a mounting bracket to the hitch on your 2013 Nissan Xterra to hold a trailer connector. For a 4-Way flat connector such as # C56225, you can use bracket # 18144 and attach it to bracket # 18140 which will then attach to the hitch. If you have a 7-Way such as # 118266 then you can use bracket # PK12711U with # 18140. Nothing should be drilled into or welded directly to the hitch.
view full answer... - Mounting Option for 7-Way Wiring Harness on 2005 Nissan Xterra with Curt Class III Trailer HitchI have a mounting option for you, but the Curt Trailer Hitch, # 13514, does not have a built in mounting bracket for part # PK12711U. Instead, I recommend using our no-drill mounting bracket, part # C57202, along with the mounting bracket you referenced, # PK12711U. The no-drill bracket will wrap around the round tube crossmember of the hitch to provide a mounting point for the 7-way bracket.
view full answer... - Trailer Hitch Recommendation for a 2011 Nissan XterraAll of the trailer hitches available for a 2011 Nissan Xterra are going to be Class III trailer hitches. This is good because that is exactly what I would recommend. A Class III trailer hitch is going to give you plenty of gross trailer weight capacity and the 2 inch receiver will allow you more options for accessories like bike racks and cargo carriers. Basically, all 3 of the available hitches for your vehicle install in the same way. If you are looking to save a little money, go with...
view full answer... - Replacement Mounting Hardware for 2012 Nissan Xterra Hitch ReceiverThere is different hardware available for each specific hitch and yes, you can purchase the hardware kit by itself. Since hitch receivers are custom fitted to vehicles, the hardware parts you receive will correlate with each receiver option for your 2012 Nissan Xterra. The replacement Hardware Kit for Trailer Hitches is # RHK, but you will need to select your hitch item number and manufacturer when ordering to ensure you receive the proper hardware for your hitch. There is a box for...
view full answer... - Hitch Pin for Cargo CarrierThough we do not carry that cargo carrier and I'm not certain what hitch you have on your Mercedes, if it is a standard Class III or above 2" hitch and your cargo carrier has a hollow shank you may be able to use the Pin and Clip For Class III, IV and V Trailer Hitch Receiver # PC3. You will only need to confirm that your hitch and carrier are compatible with a pin that is 5/8" diameter and has a 4" usable length.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Conner L
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Patrick B
Video by:
Alan C
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
7/27/2021
One year later, still looks brand new. No rust or anything wrong with it. This was an excellent purchase!