Replacement Mounting Hardware for 2012 Nissan Xterra Hitch Receiver

Question

Question:

I have a 2012 Nissan xterra and was given a hitch without the mounting hardware. can I purchase the hardware kit by itself? I prefer not to use anything but the correct bolts. thank you

asked by: Bob W

1

Helpful Expert Reply:

There is different hardware available for each specific hitch and yes, you can purchase the hardware kit by itself. Since hitch receivers are custom fitted to vehicles, the hardware parts you receive will correlate with each receiver option for your 2012 Nissan Xterra.

The replacement Hardware Kit for Trailer Hitches is # RHK, but you will need to select your hitch item number and manufacturer when ordering to ensure you receive the proper hardware for your hitch. There is a box for you to enter the hitch item number and a drop down box to select the manufacturer just above the add to cart button. We are able to offer replacement parts for Curt, Da'Lan, Draw-Tite, Hidden Hitch, and Reese Trailer Hitches.

Here are some options of the hitch item numbers and the manufacturers for your 2012 Nissan Xterra Hitch Receiver:

If you have the Draw-Tite Class III Round Tube Receiver Hitch, the hitch item number is # 75291.

If you have the Curt Class III Round Tube Receiver Hitch, the hitch item number is # 13514.

You will find the installation info attached.

expert reply by: Jason S

1

Answer 1

Have you temporarily lowered the exhaust as shown in the instructions? If so, and you cannot get enough clearance, follow the exhaust toward the front of the vehicle, to locate the next exhaust hanger. Making sure the exhaust is supported, remove…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Replacement Mounting Hardware for 2012 Nissan Xterra Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching