Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(419 reviews)
Price: $207.67
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13408
Retail:$329.95
Our Price: $207.67
You Save: $122.28
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (419)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13408
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- CURT
- 400 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Not rated for use with weight-distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13408 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1997 - 2003 Jeep TJ
- 2004 - 2006 Jeep TJ excluding Unlimited
- 1997 - 2003 Jeep Wrangler
- 2004 - 2006 Jeep Wrangler excluding Unlimited
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Defective
- Did not fit
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13408
Average Customer Rating: 4.9 out of 5 stars (419 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Jacqueline08/04/2023
The build quality of this hitch receiver is excellent -- wonderful fit and finish. It fit perfectly on my 2006 Jeep Wrangler, and the finishes all look very high quality. I put a 1up bike rack on the hitch receiver and have driven 3 bikes about 150 miles and had very little wiggling and jiggling. I am incredibly happy with the hitch and am an etrailer customer for life.
by: Fred 12/02/2023
2001 Jeep Wrangler
Product arrived within two days and was in good condition. Installation was OK. Hardest part was getting the Class I hitch off the dealer had put on in 2001. I needed this one for a rear shelf attachment. I couple of tips below, however they may only apply to my situation: 2001 Jeep Wrangler Sahara 4.0.
1. To get the old hitch off which was a side and bottom mount, I had to remove the plastic bumper end caps.
2. As indicated in the diagram the silver carriage bolt plates should be inserted with the hole end towards the rear.
3. To use a torque wrench on the passenger side front nut, I had to remove the two screws holding the exhaust pipe hanger and let it sag temporarily.
by: Pop04/12/2019
This hitch receiver is very well built of high quality materials. Perfect fit, all parts were included and it came with accurate, easy to understand instructions. I added the reflective strips after the fact. They were not included with the hitch. I couldn't be happier.
by: Brian02/28/2020
2019 Jeep Wrangler
I can't believe it's been a year already! I meant to leave a review in early 2019 about how easy the install was on my 2004 Wrangler Sport TJ, how clear the instructions were, how quickly the order shipped, and how competitive the pricing was ... but a year goes by quickly with a Jeep!
In the last year I've pulled trailers loaded with mulch and more, multiple boats, and even one of those hitch racks for the cooler. This hitch has never missed a beat.
Probably the best testimonial I can give is the stump extraction: I removed about a dozen ornamental bush stumps with a 2" tow strap loop and a chain -- piece of cake!
If you're on the fence, don't think twice. This hitch will bring a whole new sense of utility to your Jeep for years to come.
by: Matt03/13/2021
Easy install and quick shipping
Only problem is the tailpipe rattles against it
Pro tip: mount the trailer plug in the hollow, stock bumper easy to do as well
Matt
3/14/2022
Very pleased with the ease of install. I recently removed the hitch to address some surface rust on my frame and re-install was just as easy. Only issue I have is that my exhaust tailpipe rattles against the hitch so I will need make some adjustments to my exhaust
by: Neil06/19/2018
2004 Jeep Wrangler
Great product and great service. I would give this product and this company a 5 star rating in all categories.
1- Web site 5
2-Customer service 5 - Thank You - George J
3- Product video 5
4- Installation video 5
5- Delivery 5
I priced out a complete receiver hitch installation kit from a local dealer and was quoted $310.00 Purchased the receiver hitch for my 2004 Jeep Wrangler from etrailer for much less than that and my son and I did the install in less than 30 minutes.
I shop on line for just about all purchases (107 in the last six months) This company is at the top of my list on all aspects of on line orders.
by: Jeff C.04/05/2017
2006 Jeep TJ
I needed a trailer hitch for a small utility trailer and a bike rack. I was hesitant about ordering a hitch as the dealer had replaced the factory bumpers with tubular ones. I had read that this is sometimes an issue with clearance for the hitch. However, in a response to an earlier question on the site, etrailer had responded how much clearance was needed and where to measure from on the frame. I measured and had 1/4 inch to spare so I went ahead and ordered. It fit using the factory holes, and the reverse fishing technique as described in the directions worked perfectly and it was installed within a matter of minutes. Very pleased with the hitch and highly recommend it!
by: BIG Smile08/20/2012
2000 Jeep Wrangler
Vehicle: 2000 Jeep Wrangler Sport
This is a two part review. The first is etrailer and their service. This was my first experience with them and I am IMPRESSED. I placed the order Tuesday night at 8:30 and it was delivered at 12:30 Thursday afternoon. Their communication is excellent. Their website is fantastic for tracking the shipment. I found myself checking it more often than I should have just to watch the progress on the map.
Part two: the receiver. Everything was right, nothing was damaged, everything fit, everything worked the first time. The packaging was good. The Curt receiver is solid with good welds and good paint. The holes lined up. The instructions were good enough. Oh yeah my only complaint is the carriage bolt heads were a little to big to fit through the hole in the frame. I had to cut maybe 1/8" off one side. Other than that you need to have a little patience in fishing the wire down through the frame. The first one took me at least 20-30 minutes and some serious words. The second one went though the first try and took 2 minutes.
This receiver is bigger than is needed for my Jeep but it keeps the hitch the same size as our truck and as long as I don't try to pull 4000LBS with it, oversize won't hurt. It was only $20 more for the 2".
All in all I'm very happy with the purchase and with etrailer.
This receiver is bigger than is needed for my Jeep but it keeps the hitch the same size as our truck and as long as I don't try to pull 4000LBS with it, oversize won't hurt. It was only $20 more for the 2".
All in all I'm very happy with the purchase and with etrailer." />
by: Jared01/31/2019
1997 Jeep TJ
Put on my jeep 97 SE TJ. Great paint, easy installation every thing required was in the kit. 10mins to put together. Super fast delivery.
Jared
2/1/2020
Install on a 97 Jeep wrangler a year ago in Iowa winters and no rust. Use it more of a anchor when I get stuck. Tough as nail no bends or wear.
by: Tandy08/03/2018
1999 Jeep Wrangler
Great quality and easy to install as per instructions. Thanks for a good product and helpful videos. The wiring harness was even easier to install (except for accumulation of dirt in my face from the covers.) use of safety goggles might be a good tip. My bumper is hollow on the back. Actually a piece of U channel, so after glueing a magnet to the plug I can hide all wiring out of sight behind it.
by: Bob03/26/2016
2004 Jeep Wrangler
Installed on a 2004 jeep wrangler. Installation was really easy and fast. Etrailer videos made installation a breeze. Installed by myself, only hard part was lifting hitch in place and catching the bolt, but I was able to lift one side into place and balance the other side on my knee. After that just install the rest of the bolts and make sure you have a 1/2 torque wrench that can tighten to 110 ft lbs. I highly recommend this hitch!
by: Joshua12/05/2017
Product came in a timely manner. Bolted right up to the frame. No hassle and straight forward installation instructions. Looks good and holds my Thule t2 pro xt rack very snuggly.
Will recommend.
by: JDBaughman12/05/2017
Product came in a timely manner. Bolted right up to the frame. No hassle and straight forward installation instructions. Looks good and holds my Thule t2 pro xt rack very snuggly.
Will recommend.
by: Michael T.06/24/2019
2001 Jeep Wrangler
Perfect fit. Quality product from Curt. How-to installation video by etrailer.com team clear, concise, and spot on. About 30 minutes to install.
All products ordered were in stock and shipped same day. Really like the comprehensive tracking page that shows progress on map, lists how-to videos, and other information about your products (all in one place).
by: James 01/10/2024
2005 Jeep Wrangler
Great product. Easy installation. Fit nice.
by: Mike09/17/2018
2005 Jeep TJ
Needed a hitch for my 05 Unlimited Rubicon that didn't bolt from the side of the frame. This was perfect! 4 bolts, super simple install, and it looks great! I would recommend this hitch to anyone with a 1997-2006 Jeep TJ or Unlimited.
by: Brysen06/17/2016
1998 Jeep Wrangler
13408 Class III Hitch Wrangler - quality product; easy to install; looks great on the Jeep; excellent price & quick delivery.
by: Jason K.10/19/2014
2006 Jeep Wrangler
Great product, fantastic accompanying hardware... particularly with regard to the wire to fit the bolt up into the frame with. Most companies wouldn't care enough to send anything like that with the order. There was a problem with the transaction, someone from the company called me immediately and I re-placed the order using PayPal with no issues. Shipping was quick and the product itself is very good quality. Keep up the good work. Thank you.
by: Andrew04/13/2019
The trailer hitch receiver arrived quickly and installed easily. Appears to be well built and looks good. No complaints.
by: henry f09/22/2017
received the hitch quickly after ordering - install was as easy as stated and took the removal of 2 bumper bolts and installation of 2 others then replacing them - tighten all 4 down and ready to go - fit was tight but it should be - highly recommended
by: Stefan06/24/2018
2010 Jeep Wrangler
Hitch was delivered faster than I expected. Ordered on Yuesday and delivered on Friday. I took the time to make sure the bolts were already freed up from the rust on my Wrangler so when I installed the hitch it actually only took 10 minutes.
Was towing the jet ski 30 minutes later.
by: Justin02/17/2018
2000 Jeep TJ
Placed internet order on a Monday evening and received order on Wednesday evening. Impressed with speedy fulfillment of order. All items were correct and packaged adequately. I strongly recommend Etrailer.
by: Jason09/26/2017
2005 Jeep TJ
I read multiple reviews on ordering the right trailer hitch for my 2005 TJ, and decided based on the reviews that etrailer was the way to go. Installation from their videos looked simple and straightforward, and the overall reviews wee great. I ordered the hitch on a Tuesday, set it up for 3-5 day delivery, and it arrived Monday afternoon. I was hoping for a Friday delivery so I could install it over the weekend, but I didn't get my order in quick enough. Regardless, the product showed up on Monday and was very simple to install. The fishing method worked perfectly, and I had the entire hitch installed and torqued down within 30 minutes. I would highly recommend this company and this hitch. I'm attaching a picture (sorry I peeled off your stickers, I just wanted a cleaner look).
by: Adrian L.07/08/2020
Ordered and received hitch for my 2001 Jeep Wrangler. Well packed and shipped quickly. Arrived with some welding slag particles in the box- not a problem- the welds looked good deep and clean, powder coating was perfect. Instructions were clear and concise and came with all of the hardware including some nifty spring/thread holders for the carriage bolts allowing them to be installed inside the frames. I initially had some trouble positioning the entire unit for bolt-up (I was working alone and had to rig up two rope slings to hold it up-tricky) - I thought that there might be some problem with fit of hitch to frame because it didnt seem to want to go into place. All of a sudden with a little pushing and coaxing the entire unit "clunked" into place. The mount angles were perfect, bolt holes lines up perfectly. All of the difficulty that I had experienced (not really that much) was because this is a PRECISION fit for the vehicle. I bolted and torqued everything down without an issue. Pulled my boat on the trailer later in the day, rechecked the torque and have had no problems. Now on season two, no rust, no problems. Absolutely would recommend without reservation. to anyone who needs a good, fairly low profile hitch for a Jeep Wrangler.
Trailer lighting harness kit which plugs into the passenger side taillight connector purchased at the same time installed in about 3 minutes and is excellent too.
Adrian L.
7/9/2021
So far no problems to speak of, some wear and tear of the powder coating inside the hitch receiver to be expected Ive been squirting some spray protectant into there from time to time when I remember to... Hitch still strong and looks good. Weve done a lot of trailering since COVID and this thing has held up well. Still highly recommended.
by: Jeff08/31/2018
1998 Jeep Wrangler
I just installed it. It was easy to install. Etrailer made sure I had everything I needed. It has a great paint job and it is of high quality.
25
428
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Recommendation for 1998 Jeep Wrangler SportThose two vehicles are different enough that they'd require two different hitches. For a Class III hitch that fits your 1998 Jeep Wrangler we have the Curt part # 13408 that would work well. This is a 2 inch hitch with a 4,000 lb trailer towing capacity. I attached an install video for this for you to check out as well.
view full answer... - Fit of Curt # 13408 Trailer Hitch on 1997 Jeep Wrangler w/ Smittybilt Aftermarket Rear BumperThe hitches we offer for the 1997 Wrangler were designed with the stock bumper in mind. As long as your Smittybilt tube bumper doesn't sit any lower on the vehicle than the stock bumper would, the Curt # 13408 should fit. You can doe some measuring to confirm. Measure downward from the frame member where the hitch would attach by 1-3/4 inches. This is where the top of the receiver tube would sit. If the bottom of your bumper is any lower than that, the hitches we offer for the 1997 Wrangler...
view full answer... - Additional Tips For Towing a Trailer With a 2004 Jeep WranglerYou will need to find out the towing capacity of your 2004 Jeep Wrangler and make sure the trailer you will be towing will be under the towing capacity of your Wrangler. Make sure the hitch you are using on your Wrangler will have enough towing capacity for towing your trailer. Remember that you are limited by the lowest-capacity product in your towing system, whether it is the hitch, ball mount or ball. Make sure that these components have the same capacity or higher as your hitch. I...
view full answer... - Can Tow Hook be Reinstalled on 2202 Jeep TJ with Curt Trailer Hitch InstalledThe tow hook on your 2002 Jeep TJ can't be able to reinstalled with the Curt Trailer Hitch Receiver # 13408. These use the same mounting locations and the hardware is only able to accommodate one of them. Attached is a video showing us perform the installation on a 2005 Wrangler where it has the tow hook.
view full answer... - Installation of Draw-Tite Class I Receiver on 2001 Jeep WranglerWe no longer offer a class I hitch for your Jeep Wrangler. Was there a particular reason why you were interested in the Class I hitch? Due to their limited towing and tongue weight capacity, I typically recommend going with the Class III receiver if the option is available. A Class I and II receiver opening is 1-1/4 inches square, versus 2 inches square for a Class III. As the 2 inch receiver is more common, there is a greater variety of hitch accessories like bike racks and cargo carriers...
view full answer... - Availability of a Trailer Hitch that Will Fit a 2005 Jeep Wrangler with a Tube Style BumperI spoke with my contacts at Curt and Draw-Tite, Hidden Hitch, Reese about this issue and I have some information for you. For Curt, my contact stated that if the tube bumper is from the factory and not an aftermarket or dealer added item, then their trailer hitches, like # 13408, will fit. For Draw-Tite, trailer hitch # 75193, my contact stated there are no exceptions as long as the bumper came from the factory. The issue seems to be that the aftermarket and dealer bumpers attach at the...
view full answer... - Does Curt Trailer Hitch Receiver Fit 2005 Jeep WranglerDefinitely a goo idea to confirm a fit before ordering, and the Curt Trailer Hitch Receiver # 13408 is a confirmed fit for your 2005 Jeep Wrangler. It is a match and is extremely easy to install, requiring you lift up the hitch and bolt it on. I have added a link to the written instructions as well as a video install of the Curt Trailer Hitch Receiver # 13408 on a 2005 Jeep Wrangler. If you are going to be towing and need a wiring harness to power your trailer lights, the right part...
view full answer...
- Suitability of Draw-Tite Class I Receiver Part # 24631 for 1998 Jeep Wrangler with C Channel BumperI have looked over the installation instructions for the Draw-Tite Sportframe Class I receiver. The hitch will fit the standard OEM C-Channel bumper. Two of the bolts attach to the Jeep frame, and two attach to the existing bumper. The instructions include a cross sectional drawing that shows how the hitch mounts to the bumper. As long as your Jeep does not have the tube bumper, this hitch will work just fine for you. Was there any particular reason you were wanting to go with the Class...
view full answer... - What is the Difference Between the Curt Hitches # 13430 and # 13408 for a 2006 Jeep TJ WranglerThe biggest difference between Curt Hitch # 13430 and # 13408 is that the # 13430 has a round cross tube whereas the # 13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing capacities. Another difference between the two hitches is how it attaches to the frame of your 2006 Jeep TJ. I attached a picture that shows the different mounting methods each hitch has. I also attached a picture of both of these hitches...
view full answer...
- Curt Hitch #13408 Replacement Hardware RecommendationReplacement hardware is available. You will need part # RHK. Once on the product page, just type in the Hitch Item Number in the box on the right. Then use the pull down menu below that to select the manufacturer. Then just click the Add to Cart button and you will be done. Hitch hardware is one-only. So you if you are trying to install this hitch on a second vehicle you would want to use all new hardware.
view full answer... - Does Curt Trailer Hitch Receiver 13408 Fit 2000 Jeep Wrangler With Tube BumperYes, the Curt Trailer Hitch Receiver # 13408 will fit your 2000 Jeep Wrangler with the tube bumper. That exclusion only applies to one Draw-Tite hitch so this Curt hitch will work perfectly. If you plan on doing some towing with your Jeep and need a trailer wiring harness as well, the correct fit is the T-One Vehicle Wiring Harness # 118409. I have added links below to video installs for you to check out of the harness and the Curt Trailer Hitch Receiver # 13408.
view full answer... - Replacement Mounting Hardware Kit For Curt Trailer Hitch Receiver 13048Absolutely! To get a replacement hardware kit for the Curt Trailer Hitch Receiver # 13408 you will need # RHK. Above the add to cart button you will enter the hitch item number which in your case is 13048, and select Curt from the manufacturer drop down menu. This will include everything needed to install the Curt # 13408 on your vehicle.
view full answer... - Curt Hitch Recommendation for the 2002 Jeep WranglerBoth the Curt hitch part # 13408 and the part # 13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the # 13408 uses a different attachment method like you noticed and has a square cross tube whereas the # 13430 uses a round tube. Both are equally strong, some just prefer the look of one over the other. I attached pics of both of these hitches installed to let you decide which you like better. I attached install...
view full answer...
- What Size Bolts Come with Curt Trailer Hitch part # 13408The trailer hitch part # 13408 comes with install bolts that are 7/16-14 x 1 3/4 and M12 - 1.75 x 50mm. These are Grade 5. If you were in need or replacement hardware you can order it from us with part # RHK.
view full answer... - Replacement Hardware for Curt Class III Trailer Hitch Receiver # 13408We have exactly what you need! For just the replacement hardware for your Curt Trailer Hitch Receiver # 13408, you will use part # RHK. Once on the product page, you will simply type in the Hitch Item Number in the text box provided (13408) and select Curt as the manufacturer on the drop-down menu. We will then send you the complete hardware kit for your existing trailer hitch.
view full answer... - Replacement Mounting Hardware for Curt Trailer Hitch Receiver 13408You can definitely get replacement hardware for the Curt Trailer Hitch Receiver # 13408 that fits your 2000 Jeep Wrangler; what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is click # RHK, enter "13408" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, hit "Add to Cart" and you're set!
view full answer... - Recommended Trailer Hitch for 2005 Jeep Wrangler Yes, the Curt Trailer Hitch Receiver # 13408 referenced in your question is confirmed to fit your 2005 Jeep Wrangler as long as it is not the Unlimited model. This Class III hitch is custom-fit for the Jeep, which means it will use existing holes in the vehicle's frame for a no-drill installation. It will provide a 2 inch receiver opening and a 4,000 pound towing weight capacity. I have attached the written installation instructions along with an installation video on the 2005 Jeep Wrangler...
view full answer... - Where Do I Find Replacement Hardware Kit For My Curt Receiver Hitch # 13408?Yes we do have replacement hardware kits for this Curt # 13408 hitch. You will want to go to the product page of Replacement Hardware Kit for Trailer Hitches # RHK and enter in your hitch item number, for examle, # 13408. Then select the hitch manufacturer and add to cart. Always make sure to replace the mounting hardware when transferring a hitch to another vehicle. I have attached a demonstration video for the hardware.
view full answer... - Does Trailer Hitch Receiver for 2003 Jeep TJ Come With WiresThe Curt Trailer Hitch Receiver # 13408 that fits your 2003 Jeep TJ does not come with a trailer wiring harness or any wiring, which is something that you would have to get separately. For that, the correct part is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118409. I've added links to some instructions and video installs for you to check out.
view full answer... - Replacement Hardware Kit for Curt 13408 For Jeep Wrangler TJ In order to replace the mounting hardware for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 13408 you'll want the Replacement Hitch Hardware Kit # RHK. When you go to the page for the # RHK there is a field marked "Hitch Item Number" and you'll put the part number for your hitch- 13408- into that field.
view full answer... - Replacement Hardware for Curt Hitch To Reinstall On 1999 Jeep WranglerWe have just what you need. Since you had to remove the hitch to do some work on your Wrangler, it is always recommended to use new mounting hardware when re-installing a trailer hitch. For your Curt Hitch part # 13408, the hardware kit can be ordered by typing the part # RHK in the search box on our website. You will then need to type the hitch number in the box on the right side of the page and under that select Curt from the dropdown box. Then enter the quantity of hardware sets you...
view full answer... - Availability of a Trailer Hitch that Will Fit a 1998 Jeep Wrangler with a Tube Style BumperI spoke with my contacts at Curt and Draw-Tite, Hidden Hitch, Reese about this issue and I have some information for you. For Curt, my contact stated that if the tube bumper is from the factory and not an aftermarket or dealer added item, then their trailer hitches, like # 13408, will fit. For Draw-Tite, trailer hitch # 75193, my contact stated there are no exceptions as long as the bumper came from the factory. The issue seems to be that the aftermarket and dealer bumpers attach at the...
view full answer... - Replacement Hardware for Trailer Hitch Receiver 13408You can absolutely get just the hardware for the Curt Trailer Hitch Receiver # 13408. What you need is simply the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is click # RHK, enter "13408" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, and hit “Add to Cart” to place your order.
view full answer... - Recommended Class III Trailer Hitch for 2000 Dodge Ram with Step Bumper For your 2000 Dodge Ram 1500 with a step bumper, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75101. This Class III hitch is confirmed to fit your Dodge Ram with the step bumper and will use existing holes in the truck's frame for a no-drill installation. This hitch will provide you with a 2 inch receiver opening and a 5,000 pound towing capacity. I have attached the written installation instructions that you can take a look at. The complete hardware kit will be included. If...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Zack K
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alan B.
4/13/2020
Im very pleased with the hitch. I haul a small utility trailer occasionally and havent had any problem at all. Finish is holding up well and no signs of corrosion at all. Great product from a great supplier. Thanks Etrailer.