Replacement Hardware Kit for Curt 13408 For Jeep Wrangler TJ

Question

Question:

need the hardwear for the hitch 13408, but can not seem to find it ? Please help

asked by: Christopher C

0

Expert Reply:

In order to replace the mounting hardware for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13408 you'll want the Replacement Hitch Hardware Kit # RHK. When you go to the page for the # RHK there is a field marked "Hitch Item Number" and you'll put the part number for your hitch- 13408- into that field.

expert reply by: Erik B

0

Answer 1

Replacement hardware is available. You will need part #RHK. Once on the product page, just type in the Hitch Item Number in the box on the right. Then use the pull down menu below that to select the manufacturer. Then just click the Add to Cart…

view full answer...

Answer 2

The Hidden Hitch trailer hitch 70594 is now discontinued (since 2011) but I was able to confirm with my technical contact there that this hitch fits 1999 through 2004 Jeep Grand Cherokees. Hitch hardware is intended for a single use only so the new…

view full answer...

Answer 3

Hitch hardware is almost always Grade 5. The Curt Hitch part 13408 is no exception. Going with Grade 8 certainly wouldn't hurt anything though. To order replacement hardware you will need part #RHK. You will need to select your hitch manufacturer…

view full answer...

Answer 4

You can definitely get replacement hardware for the Curt Trailer Hitch Receiver #13408 that fits your 2000 Jeep Wrangler; what you will need is the Replacement Hardware Kit for Trailer Hitches #RHK. All you need to do is click #RHK, enter…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...