THIS ITEM IS NOT A FIT FOR
2012 Ford Escape
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Item # 118624
Retail:$46.61
Our Price: $18.96
You Save: 59%
2012 Ford Escape
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (12)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118624
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- No Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind rear bumper
- Plug in connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 7.5 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
118624 Tekonsha T-Connector - OE Replacement 4-Flat
Installation Details
This Product Fits The Following Vehicles
- 2012 - 2014 Land Rover Evoque
- 2012 - 2015 Land Rover Evoque
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - 118624
Average Customer Rating: 4.9 out of 5 stars (12 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.by: Lena05/16/2024
This wiring harness is another great part/item we have gotten from Etrailers. They have never disappointed us with anything we've bought from them. Everytime we call Etrailers they have been amazing to deal with!!! Each salesperson we've talked to has made sure we are directed to the right parts and is always willing to go out of their way to help us. And each one of their items we have bought is of great quality!!! We will continue buying from Etrailers.
by: Dennis 10/31/2022
Dealer wanted over $[XX] to install a wiring harness. I installed this in a little less than 10 minutes for under $[XX] Now that's a savings. All blinkers, brake lights and running lights work perfectly.
by: Michael 08/31/2023
2015 Land Rover Evoque
On time thank you...
by: Rob 08/07/2022
Super easy plug and play install. Great directions and video on how to install.
The directions did state the connection was on the passengers side, turned out it's on the drivers side.
by: Jason 02/18/2021
2018 Land Rover Evoque
This fit my 2018 Range Rover Evoque, despite only being listed as compatible through 2015. It's quite easy to check for the required connectors by the drivers side rear corner.
by: Pablo10/16/2017
2015 Land Rover Evoque
Fast Delivery and East Installation! The video makes it even easier to install the harness.
by: Doug07/18/2018
2015 Land Rover Evoque
The adapter works perfectly. The video instructions were helpful! Very easy to install. The price was also great!
by: Abhay Vadhavkar11/30/2020
Perfect fit and performance.
by: David01/06/2019
Perfect fit for my car
Highly reco mmended
by: Skip W02/15/2018
2013 Land Rover Evoque
Good plug for the price and to get the job done. Will look to convert to a 7 plug or adapt it out if needed...just in case.
by: William06/03/2021
by: Susan 10/30/2021
2015 Land Rover Evoque
12
12
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Adding Lights to a Kuat Sherpa 2.0 Bike Rack on a 2015 Land Rover EvoqueThere isn't anything specifically designed for lighting on a bike rack so you're going to have to be a little creative here. Since the Kuat Sherpa 2.0 # SH22G is aluminum and you don't want to drill into it (Understandably so) you'll need to find a way to mount lights to it. Zip ties, like you mentioned, are going to be your best option. Tying a light like # ST45RB would be difficult to find a surface but might work. You'll also need a 3-wire connector # A45PB per light. Then you'll...
view full answer... - Trailer Wiring Harness Connection Points for 2012 Land Rover Range Rover Evoque DynamicThank you for the information. The instructions might be better off saying that the connectors are usually on the passenger side but could be in an alternate location such as the driver side. This is not the first time I have heard of this. Subaru is actually notorious for moving the connection points to different locations. This is the first time I have heard of the issue on a Land Rover though. Interestingly, the other harness for the 2012 Evoque, # C56159, just says behind the bumper...
view full answer... - Trailer Wiring Harness Recommendation for a 2013 Land Rover EvoqueThe Tow Ready Wiring harness part # 118624 that you referenced has been confirmed to fit the 2012-2014 Land Rover Evoque models so it should work well for you. Curt is not the manufacturer of this wiring harness though. They do not offer a trailer wiring solution for the 2013 model so maybe that is why they said there wasn't a fit, but the # 118624 from Tow Ready will work for you.
view full answer...
- Location of Install Connector for Trailer Wiring on a 2012 Land Rover EvoqueThe connector you need to use to install the Tow Ready wiring harness part # 118624 on your 2012 Land Rover Evoque is under the vehicle on the passenger side. Locate the opening to the right of the vehicle muffler. You will reach up into the opening to find the great plug. Check out the picture I attached to see the plug you are looking for.
view full answer...
- How To Install 4 and 7-Way Trailer Connector on 2015 Land Rover EvoqueIn order to obtain a 4 and 7-way trailer connector on a 2015 Land Rover Evoque you'll need to start with the T-One Vehicle Wiring Harness for Factory Tow Package part # 118624 which can then be combined with the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. In regards to mounting, I also recommend the Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket part # C57202.
view full answer... - Trailer Hitch and Wiring Recommendation for 2013 Range Rover EvoqueThe Curt hitch part # C13128 that you referenced has been confirmed as a fit for both a 2012 and 2013 Land Rover Evoque so it would work well for you. I attached an install video for you to check out as well. For wiring you would use # 118624. The wiring will not interfere with the operation of the camera or sensors. To complete your towing set up I recommend the etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer... - Items Needed To Tow A Small Cargo Trailer With A 2013 Land Rover EvoqueYes, we currently have the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 you could use and we also carry all the accessories you'll need to tow a trailer. The first thing you'll need to tow a small cargo trailer with your 2013 Land Rover Evoque is a trailer hitch receiver. If you do not have one then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13128. Curt manufactures their hitches in the US and are known for their quality and long lasting powder...
view full answer... - Routing Wiring for T-One 4-Way Harness on a 2015 Land Rover EvoqueAs long as the T-One # 118624 wiring isn't touching the heat shield it is in a good place on your 2015 Land Rover Evoque. I have attached an installation video of us installing this wiring kit on a 2013 Evoque that you can reference. If you plan on using the Draw-Tite Max-Frame Trailer Hitch Receiver # 75227 for towing then to complete a towing setup you also need a ball mount kit. I recommend checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise...
view full answer... - Which Trailer Wiring Harness Fits 2012 Land Rover Range Rover Sport HSEThat's because for your 2012 Land Rover Range Rover Sport HSE there isn't a plug and play style of trailer wiring connector for your vehicle. You'll have to hardwire in a trailer wiring kit like with the ZCI part # 119250KIT which actually uses sensors to connect to your taillight wiring so you don't have to splice into the wiring at all. The part # 118624 that you referenced fits the Evoque models which are different from what you have.
view full answer... - Does Trailer Wiring Kit part # 118624 Fit 2015 Land Rover EvoqueYes, the trailer wiring kit part # 118624 is the correct trailer wiring 4-way you'd need for your 2015 Land Rover Evoque. I attached an install video for this kit for you to check out as well.
view full answer... - 2012 Land Rover EvoqueHey Kenny, thanks for reaching out! I don't have a wiring diagram or way to recommend tying into your OEM wiring on your 2012 Land Rover Evoque, but we do have a few different universal-type options like the Putco Luminix Off-Road LED Light Bar # P10020 which comes with it's own wiring and power button. So you just tie the lights into the battery for power and then you choose when you want to turn the lights on.
view full answer... - Trailer Wiring Harness 118624 Only Plugs Half Way Onto a 2013 Land Rover EvoqueIs there room for the connector on # 118624 to go on any further or does it stop half way? It will be a tight fit and it might take a little more muscle to fully seat the 2 connectors. You could use some dielectric grease, # LT37534, on the connections and it could make sliding it on easier and provide moisture protection.
view full answer... - Will a Trailer Hitch on a 2012 Range Rover Evoque Require Trimming or Interfere with Camera/SensorsWe do have the Curt trailer hitch for the 2012 Range Rover Evoque, # C13128. There is no drilling required for installation but the exhaust will need to be temporarily lowered for installation and there is some minor fascia and heat shield trimming required. I have included a link to the installation instructions so you can see a little more detail on the trimming that is needed. There are also some lovely pictures in the hitch instructions that show the finished result of the installation....
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Video Edited:
Jacob T
Written by:
Laura H
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Test Fit:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.