Which Trailer Wiring Harness Fits 2012 Land Rover Range Rover Sport HSE

Question

Question:

I am having trouble locating the connection points for my trailer harness on a 2012 Range Rover HSE sport.

asked by: Dylan S

0

Expert Reply:

That's because for your 2012 Land Rover Range Rover Sport HSE there isn't a plug and play style of trailer wiring connector for your vehicle. You'll have to hardwire in a trailer wiring kit like with the ZCI part # 119250KIT which actually uses sensors to connect to your taillight wiring so you don't have to splice into the wiring at all.

The part # 118624 that you referenced fits the Evoque models which are different from what you have.

expert reply by: Jameson C

0

Answer 1

The Curt hitch part #C13128 that you referenced has been confirmed as a fit for both a 2012 and 2013 Land Rover Evoque so it would work well for you. I attached an install video for you to check out as well. For wiring you would use #118624. The…

view full answer...

Answer 2

The Tow Ready Wiring harness part #118624 that you referenced has been confirmed to fit the 2012-2014 Land Rover Evoque models so it should work well for you. Curt is not the manufacturer of this wiring harness though. They do not offer a trailer…

view full answer...

Answer 3

The connector you need to use to install the Tow Ready wiring harness part #118624 on your 2012 Land Rover Evoque is under the vehicle on the passenger side. Locate the opening to the right of the vehicle muffler. You will reach up into the opening…

view full answer...

Answer 4

Thank you for the information. The instructions might be better off saying that the connectors are usually on the passenger side but could be in an alternate location such as the driver side. This is not the first time I have heard of this. Subaru is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...