To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once installation is complete, the 4-way flat connector will be stowed in the spare tire compartment of your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (28 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.Perfect fix for my 2010 Dodge Journey R/T. Factory hook-up went bad and was too expensive for me to repair, and I only pull trailers with a 4 flat anyway so I just threw this in and it works well.
Install of the lighting wiring was a breeze with this kit. Install video reflects what is required to get this installed well. Fishing the wires as shown in the video rewards you with a well protected and professional look, with nothing showing except the 4 wire connector for the trailer.
Had to remove one wire tie to lengthen the green wire running to the passenger side. Removing another would give you another 6"-8" if you routed the wire differently and needed the additional length. Connectors clicked right into the factory wiring on my 2010 Journey and felt secure.
I purchased this for a 2010 Dodge Journey, and I have to say the installation was easy enough and it worked great the one and only time I had to use it. I think a little more planning on my part would have made running the wire through the bumper channel a lot simpler but I have no complaints. Definitely worth the money.
E-Trailer did exactly what I had expected. They delivered a good product, at a good price, and on time. In addition to that they did something very unexpected, they provided a very well put together video that showed me how to install the kit with minimal issues, and they contacted me various times through out the ordering process to insure I received what I expected. In the future I will make it a point to insist that people contact E-Trailer for their hitch and trailer needs.
wow i orderd on line 6-18 320 in the morning.got a email at 4:20 confirming order another email at 5:24 pieces available ready to ship. on same day 6-18 at 1:37 email pieces shipped. wow monday afternoon there in the mailbox.im not talking a week im talking 6-20 monday people and they are the right parts for my car.im just sorry etrailer that i orderd the things from uhaul first. the hitch from them was 5 days wiring was 7 days an was a universal wiring not a custom fit.again sorry etrailer next time i will go right to you great job thank you andy
I called customer service & gave them the part #, and within a very short period of time the wiring harness was on its way. Received it fast & was the correct product, the install took less then 15 minutes. I will buy from & recommend etrailer.com in the future.
Easy to install, The green wire (passenger side) should be a foot longer. I couldn't running it through the frame like i did the 4-wire connector. Other then that works just like it should, cant ask for more then that.
this product work really good. the only bad thing is. when i went to install it. the wire was on the short end to reach over to the other light. but i was able to cut a few of the zip ties and had plenty of wire then. it also was very easy to still.
Your product is almost excellent. The drawback is that the wire going over to the left side is almost too short. And that's after I ran it along the inside seal (underneath) of the rear hatch (works really well) to shorten the distance. If I had run it under the car it would have been too short. Other than that it works really well and is an easy product to install.
I purchased this trailer wiring harness for my 2010 Dodge Journey. Delivery was very quick and it was extremely easy to install, the directions clear, and it worked just as it should. A big plus is it saved me well over $100.00 as opposed to buying a "factory" harness.
I am very happy with the product I brought...it fit exactly on my vehicle fast and easy...Thank you very much..if I need anything for my suv and trailer..I will go online again for more products..once again happy customer....
I watched the video on your website and it was very simply explained. Installation was a breeze. Product was exactly as seen in video. A+ is how I rate this product.
excellent if I can ever get it installed. The weather here in St. Louis area. If Nick as around tell him that I met his wife, Angie at the hospital yesterday, I had hip surgery and she was my nurse.
Great product! Fast Shipping! Installed complete hitch and wire set in 40 minutes. Saved me 400.00 from taking it elsewhere.
Ordering was easy. Product as ordered. Order came within a week. Would recommend this company. Was told by car company is would cost about $300.00 to put harness on. It will cost approx. $45.00 to do so by using this product.
It was a very nice hitch. The installation was very smooth and fit great. deleivery time exceeded my expectations, I will recommend etrailer to all my friends.
Good product. Easy to install and the only issue I had was running the wires from one side to the other. Taking my time was about a 20 minute project.
Work exactly like the videos show very easy to install done 20 min.
Completely satisfied with the product. Easy to install works great,as advertised.
Would do business with them again.
Great staff and easy to
Work with.
Works perfectly only drawback wires need to be a little longer.
Easy install 15 minutes and it was d one.
Again great service great website helpful videos recommended to all my friends
Just what I wanted. Great package.
Vidoes make it an easy installation!
great service
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Packer C.
8/30/2020
Often these DIY fixes don’t last, that is not the case for me. This product has continued to be dependable after a year of daily use! Will buy again if needed.