Filter Products
Filter Results
$15.73 - $24.76
$7.12 - $24.76
$1.48 - $3.76
$30.32 - $30.32
Filter by Features
$15.73 - $24.76
$7.12 - $24.76
$1.48 - $3.76
$30.32 - $30.32
Videos
for Trailer Door Hinges
Help Articles
for Trailer Door Hinges
Expert Answers
for Trailer Door Hinges
The side plates on the 3" Wide Continuous Hinge #MA65VR you found are 0.09" thick which is just under 3/32". We do have a…
view full answer...Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need…
view full answer...The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's…
view full answer...The Ramp Door Hinge #PLR1902 does require welding of both portions. The tab gets welded as you stated to one side and the outside cylinders get welded to the opposite side. I've attached a couple pictures to assist.
view full answer...Yes, you can cut the 8 foot long hinge kit part #MA32VR down to 7 feet in length and it would work great.
view full answer...To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch…
view full answer...Based on your picture it appears your trailer currently uses some screws like the 1" Long Black Torx Wall Liner Screw #WLS100. I do recommend verifying the correct bolts needed with the trailer manufacturer as the…
view full answer...Thank you for the pictures! I may have an option for you, but none of the hinges we offer have mounting brackets that are 5" tall.. The most likely option we have is the #PLR4040 which opens 270 degrees. The…
view full answer...Determining between piano hinges, #H300 3 Inch Wide Steel 6 Ft Long or #SH200 2 Inch Wide Stainless Steel Hinge 6 Ft Long, depends what features you find more important for your application. The #H300 hinge will be stronger in that it is an inch…
view full answer...I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.
view full answer...Yes Nathan it would be possible, and you could use the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet #INTR142, Inno Flush Feet for Aero Crossbars #INXS400, and the Inno Aero Crossbars #INXB93-2…
view full answer...Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16"…
view full answer...