Which Piano Hinge will Work the Best on a Trailers Ramp Extension

Question

Question:

Researching the price points, should I use a 2inch stainless or 3inch mild steel hinge for a ramp extension. Thank you.

asked by: Michael

0

Expert Reply:

Determining between piano hinges, # H300 3 Inch Wide Steel 6 Ft Long or # SH200 2 Inch Wide Stainless Steel Hinge 6 Ft Long, depends what features you find more important for your application.

The # H300 hinge will be stronger in that it is an inch wider than the # SH200. Plus, the extra width will allow for more surface area on the hinge to mount to the trailer making for a stronger hinge.

However, if weather conditions are a concern, the # SH200 is made of stainless steel. The stainless construction will help prevent rust and corrosion of the hinge making it more likely to last longer.

If you like both the extra width and stainless features, I recommend looking at # SH300. This hinge is 3 inches wide and constructed of stainless steel. The only negative issue with stainless is it is much more expensive than standard steel.

expert reply by: Jared P

0

Answer 1

The Bottom Rail Trim for Enclosed Trailer item #36277-955 would work great on your 2005 Pace 12’ enclosed cargo trailer. It can be easily cut to size and is designed for exactly what you are doing. It will cover the unfinished edges along the…

view full answer...

Answer 2

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 3

So the right way for you to do this will depend on how often you're going to use the lights and how many of them there are. If a trailer isn't equipped with a battery, the interior lighting is frequently tied into the running lamp circuit.…

view full answer...

Answer 4

Marlboro does not list weight capacities for either the #MA75VR or the #MA45VR that you referenced. They state it will be up to the installer to determine the appropriate weight capacity. We also do not have this in a 3 foot length.

view full answer...

Answer 5

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 6

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 7

You should really attach E-Track directly to the wood floor of the trailer by trimming the rubber covering in the area you want to mount the track. Also I recommend using several E-track backing plates, #e96RR, under the wood floor so that the force…

view full answer...

Answer 8

A piano hinge like the part #SH300 could work very well for a replacement hinge for your enclosed trailer. This hinge is 6 feet long and 3 inches wide. A co-worker here used 3 of the Greasable Hinge Pin, #HP12412G, for a similar application and that…

view full answer...

Answer 9

The difference between the Piano Hinge #SH300 and #H300 is the material the hinges are made of. The #SH300 is made of stainless steel which will provide excellent corrosion resistance whereas the #H300 is made from mild steel which won't resist…

view full answer...

Answer 10

The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter #MA85VR is made from mill finished steel with a commercial die cut quality, however they are not coated with any rust preventative. With that being said, it would absolutely be…

view full answer...

Answer 11

Generally this is an issue with the remote #AL73002 communicating with the system #AL74000, a blockage, or a leak. I would inspect the compressor system and all of the air lines to make sure there are no issues. You can check for leaks using soap and…

view full answer...

Answer 12

The way a trailer ramp door is hinged is going to depend on how the manufacturer decides it needs to be hung so it really could be one long piece or several pieces. The hinge(s) may or may not extend all the way to the edges but most of the ones I…

view full answer...

Which Piano Hinge will Work the Best on a Trailers Ramp Extension

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching