Filter Products
Filter Results
$82.92 - $160.45
$107.06 - $137.96
Filter by Coupler Size Compatibility
$82.92 - $160.45
$107.06 - $137.96
Videos
for Adjustable Trailer Coupler
Help Articles
for Adjustable Trailer Coupler
Expert Answers
for Adjustable Trailer Coupler
The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…
view full answer...For your 3109 grease seals, you can use the Grease Seal #1105-100-035 for replacements. This grease seal has the same measurements (2" I.D. | 2.875" O.D.) as your current seal and has a thickness of .3".
view full answer...I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler #DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the…
view full answer...I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
view full answer...Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…
view full answer...Yes, the Sleeve-Lock Trailer Coupler #CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring w/ 3-Position Adjustable Channel Bracket #BR43ZR. The bolt holes match as well when it comes to size and spacing so you'll be…
view full answer...Hi Steve, There is not a trailer end 4-round that comes with the wiring attached, just the plug version, the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End #PK11402.
view full answer...The Curt Channel-Mount Coupler part #C25328 is designed to be used with an adjustable channel such as the Curt 3-Position Adjustable Channel Bracket part #C48610 which has an inside width of 3". Therefore, the width of the but end on the…
view full answer...Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers…
view full answer...I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer…
view full answer...To secure your PJ Trailer that's equipped with the Demco eZ-Latch Coupler #DM14040-81 I highly recommend the Fastway Universal Trailer Coupler Lock #FA86-0015-318, which doesn't require a lip on the coupler for a proper connection.…
view full answer...