2001 Chrysler PT Cruiser Catalytic Converters

For your 1996 Chrysler Intrepid we have the Drivers Side Front #MF50205 and Passenger Side Front #MF50204 direct fit catalytic converters. These will fit both the 3.3L and 3.5L engines. We do also have the Rear Converter #MF23286 for the 3.3L and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Both part numbers you referenced are confirmed catalytic converters for your 2003 Toyota Corolla. The difference is that the part #MF49461 is a higher grade converter. It is part of the OEM Grade line of converters from Magnaflow. OEM Grade…

Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not see…

Our very popular Swagman XTC2 part #S64670 will fit and clear the rear spare of a 2006 Honda CR-V. If you check out the video link I attached you can see that it fits and works well.

You can confirm compatibility of the Swagman XTC-2 Bike Rack #S64670 with the rear-mounted spare tire on your 2006 Honda CR-V by taking one easy measurement from the hitch pin hole on your hitch to the rear-most edge of the spare tire. The linked…

The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both great brake controller options. The best option for you will be dependent on where you will be doing…

On your 1999 Ford F-350 dually it sounds like you are looking for the best option for a smoother ride and that you already have the Firestone Ride-Rite Air Helper Springs #F2550. If so, do you have the Firestone Ride-Rite LS Rear Shock Absorbers…

The needed replacement part in smoke/tinted is, #FVK1020-19; this fits all 4000 series units. The vent is the standard 14-1/4 by 14-1/4 inch, simply need to align the lift assembly on the side and then make sure you mount the hinge square. Please…

Yes, as long as you install a Turnoverball rail kit part #BWGNRK1108 in your 2007 Ford F-250 shortbed you can use the B and W Companion hitch part #BWRVK3500 that you referenced.

The correct bearing kit for your Dexter 3,500 lb axle with Nev-R-Adjust brakes for your Airstream is the following: - Hub Bearing Kit #BK2-100 As for premium kits, I'm not quite sure what you are referencing, but the bearings we offer will work…

The SolidStep Manual Fold-Down Steps part #LC791574 would be correct for your Grand Design Reflection 337RLS as it works with doorways between 28" - 30" and entry height from 35" - 44". This is an excellent upgrade for your RV and…