Bumper Specs:
Bumper Specs:
Features:
Replace your vehicle's factory rear bumper with the Trailblazer. 2" Diameter, powder coated steel tubing has contoured ends for a rugged look. The integrated receiver accepts 2" hitch accessories so you can tow what you need.
Installation Notes:
No drilling required for installation
Bumper does not fit models with a factory installed trailer hitch
More Information >Bumper Specs:
Features:
Replace your front bumper with the Trailblazer off-road bumper. Corrosion-resistant steel has contoured design with graduated approach angles for navigating rough terrain. Winch tray lets you mount a winch on your Jeep Wrangler or Wrangler Unlimited.
More Information >Bumper Specs:
Bumper Specs:
Bumper Specs:
Features:
Upgrade the off-roading capabilities of your vehicle by replacing your factory rear bumper with this custom-fit, matte black bumper. It has a clean look, D-ring attachment points, and improved approach angles compared with the stock bumper.
More Information >Bumper Specs:
Features:
Get superior off-road functionality and front-end protection with this bumper that has a built-in grille guard. The "stubby" design provides maximum clearance for approach and departure angles. D-rings let you perform recovery operations.
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Bumper Specs:
Features:
Replace your factory bumper with this stylish one. Double-tube design with integrated grille guard provides front-end protection for your vehicle. 4" Lights can be mounted in the built-in receptacles. Dual powder coat over zinc resists rust.
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
Replace your factory front bumper with this stylish, tubular bumper. Double-tube design with integrated grille guard provides front-end protection for your vehicle. Dual powder coat finish over zinc coating offers maximum corrosion resistance.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
Replace your vehicle's rear bumper with this sturdy steel recovery bumper. The integrated, swing-away spare tire carrier can hold up to a 37" tire. Welded shackle mounts come with D-rings installed. Designed to take off-road abuse.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
Replace your factory front bumper with this stylish, tubular bumper. Double-tube design with integrated grille guard provides front-end protection for your vehicle. Marine-grade, polished stainless steel is durable and rustproof.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Bumper Specs:
Features:
Replace your vehicle's rear bumper with this sturdy steel recovery bumper that's designed to take off-road abuse. Welded shackle mounts come with D-rings installed. Mount 4" round lights (sold separately) in the built-in receptacles.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
Get maximum off-road functionality and front-end protection with this bumper that has a built-in, tubular grille guard. Tapered ends provide clearance for approach and departure angles. Included D-rings let you perform recovery operations.
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Bumper Specs:
Features:
Replace your factory rear bumper with this stylish, tubular bumper. Double-tube design provides rear-end protection for your vehicle. Dual powder coat finish over zinc coating offers maximum corrosion resistance.
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
Replace your vehicle's rear bumper with this sturdy steel recovery bumper. The integrated, swing-away spare tire carrier can hold up to a 37" tire. Welded shackle mounts come with D-rings installed. Designed to take off-road abuse.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
Replace your vehicle's rear bumper with this sturdy steel recovery bumper that's designed to take off-road abuse. Welded shackle mounts come with D-rings installed. Mount 4" round lights (sold separately) in the built-in receptacles.
Installation Notes:
Drilling may be required for installation
More Information >Videos
for Bumper
Help Articles
for Bumper
Expert Answers
for Bumper
Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
view full answer...From the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does…
view full answer...The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…
view full answer...Basically, a free backing brake assembly like #T4423400, will have one shoe that is shorter than the other and the bracket will be a different shape. On a regular assembly, the shoes will by mirror images of each other. Also, on a free backing…
view full answer...To replace your WFCO WF-8750P power center I recommend the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K. This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily…
view full answer...You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…
view full answer...Thanks for submitting the picture of the lights you are looking for. Based on that it looks like you are in need of a 194 bulb like the part #A194B.
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...If the light mounting surface on your older Prowler trailer is not flat enough to allow for use of caulk for sealing the rear of the RV Tail Light #30-92-001 then you might want to use a weather strip tape like #WS1412 which is 1/4-inch thick x…
view full answer...The different size Equal-I-Zer systems have heads to match the bar sizes so the parts are not interchangeable. But not to worry, with some adjustment you can soften it up a little and not have to use a different system. You will need to lower the…
view full answer...Filter Products (38)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN