The Curt Trailer Hitch Receiver # 11128 that you purchased is a confirmed fit for all models of the 1994 Suzuki Sidekick so it will fit and work well. The installation details are attached for you to reference.
Please note that any non-trailer loads should be supported with a strap like part # 18050 according to the Curt warranty for this trailer hitch. If you let me know what you will be using it for I can make additional recommendations if necessary. view full answer...
We do not have a bracket or adapter that can mate those two together on your 1989 Suzuki Sidekick.
However if you get the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 118-3 you can then use the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 to connect to your Duncan eas aligner 2000. view full answer...
The Swagman 2-Bike Rack, # S64650, has a measurement of 10-1/2 inches from the center of the hitch pin hole to the closest part of the bike rack which is the wheel mount.
You will need to measure on your 2006 Suzuki Grand Vitara to see if the bike rack will clear your spare tire. If you take a yardstick and hold it against the spare tire, straight up and down, and take the measurement from the center of your hitch pin hole on your hitch to the yardstick. If that measurement is less than... view full answer...
The Draw-Tite Class III Receiver can be installed by anyone with average mechanical ability. I will supply a link to the installation instructions below. If the installation is something you do not feel comfortable doing yourself, any trusted mechanic should be able to install it for you. The hitch itself is rated for 3500 lbs towing and 350 lbs of tongue weight (downward force) but the vehicle might have a lower capacity. In my research, I saw figures ranging from 1500 to 3300 lbs listed... view full answer...
In order to use the Blue Ox Base Plate Kit part # BX3505 on your 1994 Suzuki Sidekick with the Tow Ready Adjustable Tow Bar part # 63180, you will also need to use the Blue Ox Base Plate Adapter part # BX8833. If you also need safety cables to go between the toad and tow vehicle I recommend using part # RM-645.
Please keep in mind that in order to complete your flat-towing setup you will also need flat-tow wiring, a supplemental braking system, and possible high-low adapter. If you would... view full answer...
Since Car Top Cargo does not fit specific vehicles with their boxes you'll have to check out roof rack to know for sure if the Car Top Cargo Rooftop Cargo Box # CTC-18S will fit. As long as the crossbars are less than 3-3/4" wide x 1-3/16" tall and between 22 and 31 inches apart this box will fit and work well. It's setup to fit 22 inch crossbar spreads and if you need wider than that you'd have to do some drilling. view full answer...
The Roadmaster Falcon tow bar 5250 is the older version, which has since been replaced by the Falcon 2 # RM-520. This tow bar is compatible with both the Roadmaster XL base plates # 1011-3 and the MX base plates # 1011-5 and can handle the Grand Vitara's curb weight of approximately 3200-lbs.
You may care to have a look at the linked article on flat towing which details all of the components required for safe and legal flat towing. These items include safety cables like # RM-643, a lighting... view full answer...
We can help you with that!
In my research, I found that you are correct that your 2016 Thor Hurricane was built on a Ford F-53 Chassis.
The brake controller adapter needed is # 3035-P, which will be compatible with time-delayed and proportional brake controllers:
Proportional brake controllers:
Tekonsha P2 (# 90885)
Tekonsha P3 (# 90195)
Tekonsha Primus IQ (# TK90160)
Tekonsha Voyager (# 39510)
Time Delayed:
Tekonsha PowerTrac (# 39523)
I'd recommend going with a proportional... view full answer...
You can check the mounting hole pattern on your existing winch mount to determine if the Superwinch LT3000 winch # SW1130220 will fit. The mounting pattern required by the winch is 3 inches x 4-7/8 inches. Measurements are taken from the center of one hole to the center of another hole. view full answer...
I spoke with my contact at Thule and she stated that the Helium, # TH9042PRO, will fit in a Class I trailer hitch. The original design of the Helium restricted it to Class II hitches but updated versions have been redesigned to replace that model. You will also want to measure from the center of the hitch pin hole on the Suzuki out to the distance required to clear the rear of the vehicle. If it is less than 8 inches, the rack will fit.
If you will be carrying womens, childrens, or alternative... view full answer...
The Thule Hullavator # TH898 requires that your crossbars extend past the towers/legs by at least 4" on each side. Also, keep in mind this unit is rather heavy (about 40lbs) so when you figure in the weight of your kayak you want to make sure you are not exceeding the weight limit of your roof or roof rack. I recommend checking your owner's manual to verify the weight capacity of your vehicle's roof.
Now for a roof rack that fits your 2011 Suzuki SX4 with factory roof rails, I would go... view full answer...
According to our friends at Roadmaster, the Sterling All-Terrain Tow Bar is compatible with all Roadmaster base plate models, including the XL style # 1011-1 base plate used by your 2000 Suzuki Grand Vitara. In other words, they are indeed compatible.
You will also need to wire your Grand Vitara for towing. The easiest method would be to use the Roadmaster Bulb and Socket Kit, part # RM-155. The bulb and socket kit is very easy to install and will allow the lighting used for towing to... view full answer...
Curt trailer hitch # C13517 is a custom fit part which is why there aren't any dimensions listed for it. It is designed to fit a 1999 to 2005 Suzuki Grand Vitara, among other vehicles, so dimensionally it is the correct size for your vehicle.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch... view full answer...
The Hopkins Backup Alert, # HM20101VA, is designed to replace a # 3156 bulb and will not replace the # 921 bulb on your 2010 Suzuki Equator.
Instead, I would recommend looking at the Custer Surface Mount Back-Up Alarm, # BK97DB. This alarm can mount to any surface such the frame or bumper and wires into the reverse light circuit on your truck. Once it is wired in it will send a 97 decibel alert when the truck is placed in reverse. view full answer...
There is indeed a base plate for a 1991 Suzuki Samurai, so long as it does not have a brush guard, but does have front tie-downs. I checked with Roadmaster, and it is also compatible with the Nighthawk, but will need an adapter as it is a crossbar-style base plate. The correct part are the following:
- Roadmaster Crossbar-Style Base Plate Kit # 1003-1
- Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
- Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome... view full answer...
The Fat Tire Adapter Kit for the Let's Go Aero Bike Wing, part # BMP038 may work on your Reese Sportwing.
I did go out to the warehouse and measure the holes on the straps, and the small hole that would go inside towards the frame of the carrier is 3/8 inches wide, and the holes that would connect to the outside of the carrier is about 1/2 inches wide. view full answer...
I do have an option for you but there aren't any custom fit base plate kits for a 2006 Suzuki Reno. That said, we do have universal options such as the Curt Tow Bar with Adjustable-Width Arms part # C19745. This tow bar will actually bolt to the front of the vehicle (with bumper removed) and then allow you to attach the vehicle to another vehicle via a ball mount and hitch ball. If you need a set of lights then I recommend the Heavy Duty Magnetic Tow Lights part # TL21RK. view full answer...
I reviewed an online edition of the owner's manual for the 2007 Suzuki Grand Vitara and on page 8-11 Suzuki indicates that the 2WD with automatic transmission can be dolly towed with the rear wheels on the dolly and the front wheels on the ground, and the key in the ACC position. Such an item is Roadmaster # RM-2050-1.
I strongly recommend checking your own printed manual in case it differs from this online copy. view full answer...
I compared all trailer hitches offered for the 2010 and 2006 model years of the Suzuki Grand Vitara to see if they are common fits. That will tell us if the two vehicles' frame mounting hole pattern is the same. Both vehicles' hitch fits are shown on the two linked pages included for you. The same four hitches, such as Draw-Tite 2-inch Class III hitch # 75448 and Curt hitch # C13001, all fit on both model years.
If you intend to move the hitch from one vehicle to the other you will need... view full answer...
Yes, the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD will work just fine with your flat-bottomed style kayak.
The "V" shape of this carrier isn't very aggressive so it will work with pretty much any kayak hull style on the market.
Attached is a review video for you to check out! view full answer...
Go To Results