Dolly Towing 2007 Suzuki Grand Vitara Rear-Wheel-Drive  

First, only 4WD Grand Vitara models fitted with Full-Time Four Mode 4WD system with transfer switch are flat towable. See your owners manual for confirmation and specific instructions for flat towing. If you have this model then you will need 5…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

German vehicles like the Mercedes Sprinters have trailer wiring that just does not like to work with LED lighting like what the Demco part #DM36MV provides. But thankfully we have an adapter that was designed to solve this problem with the Curt 7-Way…

The Custer Wireless LED Tow Bar Light part #LIW-LDTL-7B and Pilot Magnetic Tow Lights part #RM-2120 are both excellent options for magnetic tow dolly lights which are wireless so no wires between the vehicle and toad are needed. In regard to powering…

In order to use the Custer Wireless LED Light #LIW-LDTL-7B you just need a standard 7 way connector. I've attached a photo of what a standard 7 way plug is going to be wired like, as well as one of our helpful articles on wiring a 7 way plug that…

You still will be able to jack up your 2010 Honda Accord with the Draw Tite hitch #24899 installed. If the rear jack point is inaccessible you'd be okay to use the hitch instead.

Hello Steven. The mounting studs that come with the #AKEBRK-35L-SA technically are removable. You would probably have to knock them out with a hammer or a rubber mallet if you want to remove them. These will bolt up to a standard 4 bolt brake flange,…

I reached out to my contact at Demco and he said that the Kar Kaddy SS #DM9713045 can be assembled by 1 person and that it typically takes about 3-4 hours. If you are a retired auto mechanic then it will likely be on the lower end as you have…