Adapter For Roadmaster Base Plates To Duncan Tow Bar

Question

Question:

I have a 1989 Suzuki sidekick that came with a Demco baseplate. I have a Duncan eaz aligner 2000 tow bar. Do they make an adapter to mate these two products ?

asked by: Jim S

0

Expert Reply:

We do not have a bracket or adapter that can mate those two together on your 1989 Suzuki Sidekick.

However if you get the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 118-3 you can then use the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 to connect to your Duncan eas aligner 2000.

expert reply by: David B

0

Answer 1

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 2

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 3

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 8

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 9

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 10

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 11

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...