The Curt Tow Bar with Adjustable-Width Arms # C19745 is a universal mount which fits any vehicle so long as they have the included bumper brackets installed. You will only need to find rigid mounting points on your Suzuki's bumper in order to install the brackets. I've added a link to a video review of this product for you to take a look at as well. view full answer...
The Fat Tire Adapter Kit for the Let's Go Aero Bike Wing, part # BMP038 may work on your Reese Sportwing.
I did go out to the warehouse and measure the holes on the straps, and the small hole that would go inside towards the frame of the carrier is 3/8 inches wide, and the holes that would connect to the outside of the carrier is about 1/2 inches wide. view full answer...
Yes, the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD will work just fine with your flat-bottomed style kayak.
The "V" shape of this carrier isn't very aggressive so it will work with pretty much any kayak hull style on the market.
Attached is a review video for you to check out! view full answer...
Since Car Top Cargo does not fit specific vehicles with their boxes you'll have to check out roof rack to know for sure if the Car Top Cargo Rooftop Cargo Box # CTC-18S will fit. As long as the crossbars are less than 3-3/4" wide x 1-3/16" tall and between 22 and 31 inches apart this box will fit and work well. It's setup to fit 22 inch crossbar spreads and if you need wider than that you'd have to do some drilling. view full answer...
The Thule Hullavator # TH898 requires that your crossbars extend past the towers/legs by at least 4" on each side. Also, keep in mind this unit is rather heavy (about 40lbs) so when you figure in the weight of your kayak you want to make sure you are not exceeding the weight limit of your roof or roof rack. I recommend checking your owner's manual to verify the weight capacity of your vehicle's roof.
Now for a roof rack that fits your 2011 Suzuki SX4 with factory roof rails, I would go... view full answer...
To flat tow your 2009 Suzuki SX4 with a Blue Ox Aladdin Tow Bar you'll need the following components:
Baseplate: Blue Ox Base Plate Kit # BX3522.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This wiring kit will transfer your motorhome's brake and turn signals through your SX4's tail lights.
Braking System: Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. This system comes with a remote to easily see when the brakes are... view full answer...
The Curt Class I 1-1/4 Inch Hitch # 11443 does fit your 2010 Suzuki SX4 Hatchback. It has a gross towing weight capacity of 2,000 lbs. and a tongue weight capacity of 200 lbs. The ball mount, pin and clip are included.
If you will be towing with this hitch you will want to check your owners manual or the Suzuki dealer for the towing capacity of your 2010 Suzuki SX4 Hatchback. For towing you will also need a Tow Ready 2 Inch Hitch Ball, # 19258, and the Curt Wiring Harness, # 56002.
If... view full answer...
The trailer wiring harness that you referenced offered by Curt Manufacturing, part # 56002, is a confirmed fit the 2007 through 2011 model years of the Suzuki SX4 Hatchback.
The link provided will let you see and compare both harnesses, which you'll note use the same style of connectors to plug in to your SX4 without the need to cut or splice wires.
Massive online retail giants that sell everything under the sun may not have the specialized expertise to be found at companies like etrailer... view full answer...
Two of the Malone Downloader Pro J-Style Kayak Carriers # MPG114MD will fit just fine on a set of 50" crossbars # MPG215.
If you wanted to add a little bit more space between the carriers, you could go with # MPG216 which is a set of 58" crossbars. view full answer...
We have confirmed with Saris that the Saris Bones 2 Bike Carrier # SA805BL will fit your 2008 Suzuki SX4 Hatchback with the spoiler. Although we don't have a good picture of this bike rack on a car, I attached one of a similar Saris bike rack so that you can get an idea of what it will look like on your SX4.
Please note that if you have any bikes with an alternative frame then an Adapter Bar # SA3040 may need to be used so that your bike has the proper ground clearance and sits level.... view full answer...
You have many options in a trunk-mount bike carrier for your 2008 Suzuki SX4 4-Door Sedan. The link at right will take you to our main page where you can view all compatible trunk carriers. We offer trunk racks from Thule, Yakima, Saris and others.
For example, if you're looking for the most cost-effective option you might consider the 3-bike Hollywood Racks Express # HRE3. The linked video illustrates this lightweight carrier's features which include the ability to fold up for easy storage.
If... view full answer...
There are only class I 1-1/4 hitch options for your 2013 Suzuki SX4. If you have a hatchback you need this one # C11443 and if you have a sedan you can use this one # C11446. These have a maximum tongue weight of 200lbs so you won't be able to fully utilize this cargo carriers # 63155 weight capacity, but you will be able to load some cargo up on the back to free up some space in your vehicle.
This carrier can hold your scooter because it's under 200 lbs, but the carrier does not come... view full answer...
There was actually a generation change in the Suzuki SX4 from the 2010 to your 2013. That's why the Curt T-Connector # 56002 will fit the older model year.
For your 2013 you will need to use a wiring kit that splices in. The Curt equivalent is part # C59236 but if you're looking for something that doesn't require splicing into your OEM wiring then the Tekonsha ZCI # 119250KIT is what you're after. This basically clamps onto your vehicle wiring and detects when it needs to send power (via... view full answer...
Go To Results