I do have thoughts, but start with the trailer hitch receiver fits for your 2015 Subaru Crosstrek if you don't have one yet, for which the best option is the etrailer Trailer Hitch Receiver # e98838.
This hitch is very similar, with the same installation and clearances as the other hitches that fit your '15 Crosstrek, the Draw-Tite # 76084 and Curt # C13135, but with a matte black finish that will help hide any scratches to help maintain a clean aesthetic.
As for the tongue weight, you... view full answer...
The Yakima RidgeBack 4 Bike Rack, part # Y02458, is designed to fit hitches with either a 1-1/4 or 2 inch receiver opening. You will want to check your owner's manual or with your dealership to see what the tongue weight capacity is for your Forester. from the information I was able to find, the Forester is limited to about 150 lbs tongue weight. This is the weight of the bike carrier added to the weight of the bikes on the carrier.
To make sure this carrier will work on your 2014 Subaru... view full answer...
Draw-Tite 6 and 7-Way Trailer Connector Mounting Box # 18159 will install on almost any hitch's 2-1/2-inch (or smaller) square crosstube using the adjustable ring clamp that is included. It will fit fine on Draw-Tite Class III hitch # 36493 which is a confirmed fit for your 2016 Subaru Outback Wagon. view full answer...
The Yakima LockNLoad Platform Rack for Crossbars # Y05044-39 has T-slots that allow you to mount any awning that mounts in the T-slots on crossbars or platforms, like the Rhino-Rack Batwing Compact Awning # RR33400. This awning is a great choice that mounts to the passenger side of your vehicle and provides 69 sq/ft of coverage. There is also the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft # RR33200, which is a bit bigger, but also mounts in the... view full answer...
The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts:
Yakima... view full answer...
You are correct in that the Thule Hullavator # TH898 Requires the crossbars to overhang between 4" - 8" past the feet. So you will not be able to use this with the Factory Crossbars on your 2024 Subaru Outback Touring XT, since there is no overhang. You will need to either purchase an aftermarket roof rack like a Thule or Yakima for example. Or you would have to use a standard Kayak carrier without a lift assist, like the Rhino Rack J-Style Carrier # S512. view full answer...
The Rhino Rack Vortex Stealthbar roof rack part # JA7973 that you referenced is a confirmed fit for the raised rails of your 2018 Subaru Crosstrek. The usable portion of the rear bar is 33-1/4 inch and front 30-7/8 inch. view full answer...
Hello Kara -
Thanks so much for reaching out. Crossbars that are compatible with your 2014 Subaru Forester and 1993 Chevy S-10 Blazer 4-door depend on what kind of factory roof rack you have (if any). Once I find out what kind of factory rack you have on your vehicles (flushed rails, raised rails, or none), I can let you know the compatibility of the Thule WingBar Evo Crossbars and the Evo Raised Rail Feet. view full answer...
Yes, the EcoHitch Hidden Trailer Hitch Receiver, # EH34FR is a Class III hitch with a 2" receiver and will fit the 2020 Subaru Outback wagon and the 2022 Subaru Outback Wagon. This is a bolt-on installation and comes complete with needed hardware. view full answer...
Yes, you can install Curt trailer hitch # C13206 on your 2015 Subaru Outback Wagon with dual exhaust. You would just have to follow the same instructions for the passenger's side as you do for the driver's side in terms of lowering the exhaust. I have linked a video showing installation for you. The vehicle in the video has single exhaust but you would just apply the same techniques to both sides. Please note that if your Outback is a Sport model there are no trailer hitch options available.
If... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 915-1 is compatible with all Roadmaster tow bars including the Nighthawk # RM-676. However, you will need to use Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00 to give you the adapter needed for that specific combination. view full answer...
As long as you have a hitch installed on your 2021 Subaru Crosstrek like the Curt # C13382 the Swagman XC part # S64650 would fit and work great! view full answer...
A cargo basket is not absolutely necessary, you can use just a cargo bag and attach it to the roof rack of your 2010 Subaru Forester. A Rhino-Rack bag does require a basket, so I recommend going with a different option from Rightline:
-Rightline Gear Sport 3 Rooftop Cargo Bag # RL100S30
I like this bag because not only is it large, holding 18 cu ft of cargo, but it's also waterproof, so the contents inside the bag are going to stay completely dry, unlike most cargo bags that are simply... view full answer...
The Saris Freedom Bike Rack for 2 Bikes part # SA4412B measures 27" from the center of the hitch pin hole to the outside of the wheel tray. If this does not give you enough room to pull into your garage then you may want to consider a folding rack like the Saris SuperClamp HD Bike Rack for 2 Bikes part # SAR44VR. view full answer...
We can get your 2022 Subaru Outback set up with a 7-way so you can use a brake controller to tow your camper, and there are just a few parts you're going to need. First is the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into a 7-way which has the remaining functions to use a brake controller. So exactly what you'll need for your '22 Outback is the following:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467
- Universal... view full answer...
The Rhino-Rack Universal Pioneer Platform Rack, part # RR42115BF, is designed to mount to a wide variety of crossbars, including factory crossbars. However, the factory crossbars only have a spread of 39", so the platform will have interference from your rails (since the factory crossbars sit below the rails).
An alternative to this platform that will sit inside the rails is part # RR42114BF. It's the same rack but smaller (48" Long x 38" Wide). The 38" width will allow it to mount safely... view full answer...
The etrailer Trailer Hitch Receiver # e59AR will reduce the ground clearance on your 2013 Subaru Forester some, but it won't make the vehicle sit lower in the back. The only reason this will sit closer to the ground is because the receiver is the same height as the crosstube.
For a hitch that has the receiver sitting under the crosstube we have the EcoHitch Hidden Trailer Hitch Receiver # 306-X7164. With this model the crosstube is hidden behind your bumper so the only thing reducing clearance... view full answer...
The Yakima EasyRider Double Decker Trailer with SkyRise HD Tent # Y08129-3727 does have a bit of cargo space still left on the crossbars, even while the tent is mounted in place. In the attached video below you can see Hayden also has a basket like the Yakima SkinnyWarrior Roof Rack Cargo Basket # Y07014 mount to hold other accessories. You could install a cargo basket and set it up to hold your turtle. view full answer...
Yes, our etrailer Trailer Hitch Receiver # e98839 will work with the Thule T2 Pro X Bike Rack 2-Bike # TH83GC or 4-Bike # TH26ZE behind your 2015 Subaru Forester. Both of these bikes racks are 6-3/4" from the center of the hitch pin hole to the closest part of the rack. Our etrailer Receiver # e98839 is 4-1/2" from the center of the hitch pin hole to the rear edge of your bumper so you will have 2-1/4" of clearance to the rack.
Personally I do prefer the appearance of the Curt Receiver... view full answer...
I verified for you the correct 4-way trailer wiring harness for your 2024 Subaru Ascent is the following:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56040 view full answer...