Expert Answers about Subaru Tribeca

• Fit of Rhino-Rack Vortex Aero Crossbars on 2009 Subaru Tribeca
• The Rhino-Rack Vortex Aero Crossbars, # RRVA137B-2, you mentioned will work great with your 2009 Subaru Tribeca. You will also need the leg kit, # RRRLKVA. The leg kit will use provided hardware to attach to the fixed mounting points on the roof of your Tribeca. The crossbars that you referenced are also available in silver as part # RRVA137S-2.
  view full answer...


• Can A Hitch Receiver Be Adjusted To Carry a Cargo Carrier More Level
• If it is the carrier that slopes inside the trailer hitch receiver you can try an anti-rattle device, like the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock # 63232. This will help keep the carrier snug against the inside of the hitch receiver. Sometimes wheelchair carriers or carriers with ramps will slightly slope downward due to the weight of the carrier. If the receiver of the Curt Trailer Hitch # C13069 is sloped downward and there are no issues with the vehicle suspension...
  view full answer...


• Compatability of Curt Carrier C18100 and Curt Hitch #13060 on a 2012 Subaru Tribeca
• The Curt Class III Trailer Hitch, part # C13069, is a good fit for your Subaru Tribeca. This hitch comes complete with hardware and requires no welding to install. I measured the distance from the mounting flange to the center of the hitch pin hole and it measures approximately 3-7/8 inches. The 19x60 Curt Cargo Carrier, part # C18100 may be a fit for the hitch depending on the clearance. The distance from the center of the hitch pin hole to the front edge of the carrier when folded up...
  view full answer...


• How to Install a 7-Way and Brake Controller on a 2009 Subaru Tribeca
• I do have options for you to install a 7-way trailer wiring harness and brake controller on your 2009 Subaru Tribeca but we do not offer a kit with all of this included. Instead, you would need to purchase each of the components separately. For starters, you will need a 4-way trailer wiring harness if you do not already have one and for that I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118461 which is a plug and play kit that will not require any...
  view full answer...


• Will Saris Traps Fork-Block Bike Carrier Base # SATRK14 Work in Subaru Forester or Subaru Crosstrek
• In order to determine if the Saris Traps Fork-Block Bike Carrier Base, # SATRK14, will work in a Subaru Forester or Subaru Crosstrek, you will need to take a couple of measurements. I would start by measuring the height and width of your vehicle's cargo area to determine what we have to work with. When it comes to the Saris Traps Fork-Block Bike Carrier Base, # SATRK14, your cargo area will need to be at least 47" wide. If a shorter track is needed, we offer a 35" Triple Track, # SATRK33. To...
  view full answer...


• Will the Pulse L Cargo Box Allow Full Access to the Rear Hatch of a 2010 Subaru Tribeca
• The Pulse L cargo box # TH615 will not come in contact with the rear hatch and radio antenna of your 2010 Subaru Tribeca as long as the measurement from the front cross bar back to the radio antenna or hatch (whichever is closer) is 46-3/8 inches or less. See the diagram to the right. The total length of the cargo box is 76-inches and please ensure you have a minimum crossbar spread of at least 23-5/8 inches in order for it to fit properly. I included a video review for you as well.
  view full answer...