Yes the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7350 is confirmed to fit your 2019 Subaru Impreza 5 door hatch with single exhaust. This receiver has a max trailer weight capacity of 3,500lbs and max tongue weight rating of 525lbs. This will work very well with the Thule Hitching Post Pro Hitch-Mounted Bike Rack - 1-1/4" and 2" Hitches # TH934XTR. This carrier has a weight capacity of 35 pounds per bike for a total of 140 lbs.
I also recommend Thule... view full answer...
The Tekonsha Wiring Harness part # 118573 is confirmed to fit your vehicle. This is a plug and play wiring kit kit that will require one circuit be ran from the converter box to the vehicle's positive battery terminal.
We haven't had an opportunity to do an installation video for your vehicle, but I've linked to the installation instruction foryou.
Part # C56040 that you referenced is not a fit your 2014 Subaru Impreza Hatchback. view full answer...
The Yakima LoadWarrior part # Y07070 that you referenced does come with clamps to secure the basket to roof rack crossbars. I attached a picture of what they look like plus an install video that shows the basket installed on a vehicle. view full answer...
Yes, the Yakima ForkLift, # Y02098 will fit your 2014 Subaru Impreza 5-door. I have linked a video review of this bike rack for you. view full answer...
No, you will not be able to bolt the Blue Ox Bolt-On Base Plate Bracket Kit # BX88230 to your existing Roadmaster base plate to then be able to use your Blue Ox tow bar.
Instead, you'd just need to use the Roadmaster Adapter Kit for Blue Ox Motorhome Mounted Tow Bars # RO64FR which will adapt your Blue Ox tow bar to work with your existing Roadmaster base plates. view full answer...
When you go to remove the rear fascia on your 2022 Subaru Impreza Hatchback to install the EcoHitch Hidden Trailer Hitch Receiver # 306-X7350, there will be an additional wire connection you need to unclip for the rear sensors in the fascia. You will need to ensure you clip the sensors back in when reassembling the fascia.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56367 when you install the receiver. This will be easier to route the wiring and access all the... view full answer...
I checked with Malone and the Storage Trunk for Malone MicroSport and XtraLight Trailers # MPG481 is not a compatible accessory for the Malone MicroSport LowBed Trailer # MPG464-LB.
As you mentioned, the Storage Trunk is compatible with other models, such as the Malone MicroSport Trailer # MPG460G. I have added links to video reviews for you to check out as well. view full answer...
The Thule Motion XT cargo box, such as part # TH629706 is compatible with crossbars up to 3-1/2 inches wide by 1-11/16 inches tall. The Yakima JetStream crossbars, such as # Y00425 are 3-1/8 x 1 inch, so the box will fit perfectly on the JetStream crossbars with a bit of room to spare. view full answer...
The Rhino-Rack Roof Mounted Steel Cargo Basket part # RMCB works with any crossbars 3-1/2" wide x 1-1/2" tall with a spread from 21" - 30". If your roof rack crossbars fall within this range then you'll be good to go. The actual height of the crossbars above the roof will not be an issue. view full answer...
The Swagman Semi bike rack # S64698 just might work with your Giant Simple with fenders and rear basket. Based on the pictures I have seen of this bike the front fender appears to end right about at the top of the tire. If that is true then the hook will be able to safely hold the bike at the tire. The rear wheel will not be an issue.
Another option you might like is the Saris Freedom # SA4412B. The center mast on this rack has cradles that can be moved vertically and that rotate so they... view full answer...
The available trailer hitches for your 2005 Subaru Impreza are all Class I hitches, including the Curt # C11497. This is in reference to how much capacity they have. A Class I hitch will have a gross trailer weight capacity of 2,000 pounds and a tongue weight capacity of 200 pounds. They also have a 1-1/4 inch receiver opening. Class II devices, such as the cargo carrier you are looking at, will physically not fit in a Class I hitch. This is so you do not accidentally overload your hitch... view full answer...
I spoke with my contact at Yakima and they said that the Yakima FrontLoader Wheel Mount Bike Carrier, part # Y02103 will fit a 2011 Subaru Impreza Outback Sport with the factory crossbars.
I would also recommend the Yakima Same Key System SKS Lock Cores, part # Y07202. This is a quantity of 2 locks (keyed alike) that can be used to lock your FrontLoader bike rack to the crossbars and lock your cable that holds the bike to the rack.
I am including a link to a video review of the Yakima... view full answer...
You sure can.
The Thule # TH903202 EasyFold XT bike rack is compatible with a Class I hitch which uses a 1-1/4 inch hitch receiver. A class I hitch like the Curt # C11466 will have a 200 lb tongue weight capacity, which means that the 45 lb weight of the rack and the combined weight of the bikes needs to come in under 200 lbs. The bike rack has a 65 lb per bike capacity, so at worst the combined weight would be 175 which comes in nicely under the 200 lb capacity of the hitch.
The EcoHitch... view full answer...
I believe you are asking about fitting a Thule T2 bike rack in the Curt hitch part # C11497 that fits your 1997 Subaru Impreza. There is a T2 Classic that fits this hitch with the part # TH9045. It fits 1-1/4" hitches. Check out it's review video.
The T2 in the other question that fits the 2" hitch could have been the Thule T2 Pro XTR # TH83JV. view full answer...
I can definitely help you find the correct wind fairing for the factory roof rack on your 2014 Subaru Impreza.
To know if the 38" AirScreen XT for Thule Crossbars # TH72WV will fit you will need to measure between the crossbar feet. The Thule # TH72WV requires at least 38" between the crossbar feet so you will need to measure your factory crossbars.
I included a video of the Thule # TH72WV for you to take a look at. view full answer...
Yes, the 8" Diameter Buyers Products Conduit Carrier Kit # 337CC800 that you referenced is actually made for 8" diameter PVC pipe as well as schedule 40 or 80 like you referenced.
Attached is a review video for you to check out. view full answer...
I spoke with my contact at Curt about trailer hitch # C11497. He stated that it will fit your 2003 Subaru Impreza TS Wagon. I have included a link to the installation details for this hitch for you to view. If you plan to do some towing, the hitch comes with the proper ball mount, pin and clip.
For a ball you can use # 19256 (1-7/8 inch) or # 19258 (2 inch diameter). For trailer wiring, use 4 Pole Harness # C59496. I have included a link to the installation details for you to view. view full answer...
Per RockyMounts, the SwitchHitter Roof Mounted Bike Carrier, part # RKY1270, is designed to fit all crossbars, so it will work well with the crossbars you have on your 2017 Imprezza.
This roof rack will work with bikes that have a quick-release front wheel and tires up to 3 inches wide. view full answer...
The dimensions you need to consider when seeing if the Yakima RidgeBack 2 # Y02457 will clear the fascia Eco-Hitch Invisi Trailer Hitch Receiver # 306-X7211 is the 9-1/2 inches from the center of the hitch pinhole to the closest part of the RidgeBack 2. The closest part of the rack of the RidgeBack 2 is the inner edge of the circular black pivot piece. If you are worried about bumper clearance on your 2015 Subaru Impreza, the dimension from the pinhole to the inside of the mast (11-1/2... view full answer...
From the information I was able to find your 2012 Subaru Impreza uses a 921 size bulb.
The Hopkins Back-Up Alert Bulb is only offered in bulb size 1156 or 3156. Unfortunately neither of these will work on your vehicle.
I recommend going with the Surface Mount Back-Up Alarm, part # BK97DB. This unit could be mounted under the vehicle behind the bumper and is easily installed by tapping into the reverse lamp circuit.
I have included a link to a video of part # BK97DB being installed on... view full answer...