Expert Answers about Chevrolet Blazer

• Parts Needed to Flat Tow a 1989 Chevy S15 Blazer 4 Wheel Drive Behind a Motor Home
• You will have to consult the owners manual for your 1989 S-15 Blazer to determine if your specific model can be flat towed behind a motor home. If you find that it is then the first item you will need is a base plate set. We have Roadmaster base plates # 108-1 designed for full-size Blazers. For a compatible tow bar the most popular option is the Falcon 2, # RM-520 rated for up to 6,000 pounds. For safety cables you can use # RM-643. For lighting you can use a simple magnetic kit such...
  view full answer...


• Adapter for 7-way Trailer Connector on 2020 Chevy Blazer for Utility Trailer with 4-Pole Connector
• If your 2020 Chevy Blazer has the typical blade-style 7-way trailer connector then yes, the # PK12716 Pollak 7-way to 4-pole adapter you'd looked at is exactly what you'd need to provide lighting inputs to your utility trailer with a 4-pole trailer connector.
  view full answer...


• What Parts are Needed to Install a Brake Controller on a 2000 Chevrolet Blazer
• We almost always recommend using a proportional controller, especially if your new to brake controllers. They are easier to use and brake the trailer in sync with the vehicle. The proportional controllers detect how hard or how light you are braking and match that so the trailer brakes evenly with your vehicle. One of our most popular and one of the easiest to use brake controllers is the Tekonsha Prodigy P3, part # 90195. You will also need a 7-Way trailer connector to provide the needed...
  view full answer...


• Flat Towing Setup for 1991 Chevy K5 Blazer
• I did some research on your vehicle and found that the 1991 Chevrolet K5 Blazer is a full-size sport-utility vehicle that was built by GM as their smallest full-size SUV. The K5 Blazer was replaced for 1995 by the Tahoe. For this vehicle we do have a base plate kit, Roadmaster # 108-1. To complete a flat towing setup for this vehicle you'll also need a tow bar, safety cables, a wiring/lighting kit, a braking system. All of these items are covered in the linked article which I suggest you...
  view full answer...


• Parts Needed to Flat Tow 2002 Chevrolet Blazer
• As long as your owner's manual says it is okay to flat tow your 2002 Chevrolet Blazer you are good to flat tow. To flat tow your Blazer you will need a base plate, a tow bar, tow lights, and a supplemental braking system. I have attached a help article on flat towing for you. For a base plate, I recommend the Blue Ox Base Plate # BX1627. This base plate is designed to fit the 4 wheel drive Blazers. No welding or drilling is required to install this base plate, it bolts securely to your...
  view full answer...


• Recommended Electronic Brake Controller and Wiring on 2002 Chevrolet Blazer with a 4-Way Connector
• If your new trailer has electric brakes then you're going to need an electronic brake controller in your 2002 Chevrolet Blazer. I recommend the Tekonsha Prodigy P2 # 90885 because it's the easiest to install and use. It will need to be hardwired into the Blazer with the included pigtail harness. The black wire from the harness will go to 12 volt power, the white to ground, the red to the stop light switch near your brake pedal (This is the wire that will only have power when the brake...
  view full answer...


• D Washer Replacement Needed for a Spindle
• It sounds like the washer you are looking for is like part # 5-23 which I have added a photo with specs for you to reference. This type of washer is held in place with a spindle washer like part # 5-101. Are you looking for a replacement bearing as well? If you could let me know what the bearing number is, like the the popular # L44649, then I can help you out with getting a replacement.
  view full answer...


• Parts Needed For Towing a Trailer With a 2022 Chevrolet Blazer
• First you will need the etrailer Trailer Hitch Receiver # e36YR for your 2022 Chevrolet Blazer. This receiver will fit all trim levels with the exception being the premier. It is rated for up to 750lbs of tongue weight and a trailer weight up to 5,000lbs. If you are using a weight distribution hitch the capacity increases to 6,000lbs. Be sure to verify with your Chevrolet dealer exactly how much your Blazer can handle and use the lower of these sets of numbers. For the wiring I recommend...
  view full answer...


• Redarc Tow-Pro Elite Parts Needed for 2020 Chevrolet Blazer
• Our Redarc Tow-Pro Elite # RED44FR will contain what you need to install the brake controller in your 2020 Chevrolet Blazer that came with the factory 7 way. You shouldn't require a circuit breaker # 331-CBK30-EB as this should all be included in the factory harness. The wiring is behind the side kickplate by the fuel pedal. Your Blazer being a new vehicle line doesn't have a lot of information available. But the good news is it shares the same chassis as the GMC Acadia that has been in...
  view full answer...


• Parts Required to Install a 7-Way Connector on 1999 Chevy Blazer
• The vehicle-side trailer connector # 74682 that you referenced has a round U.S. Car connector intended to mate with a similar plug on Blazers that are equipped with a factory 7-way. Please see the linked photo. This is an OEM replacement for such vehicles. If there is no mating U.S. Car plug on the Blazer you can still have a working 7-way by first installing a 4-pole harness # C55411 which splices into the wiring either on the driver's side frame rail or behind the bumper. With the 4-pole...
  view full answer...


• What Vehicle Mounting Brackets are Needed to Flat Tow a 2000 Chevrolet Blazer with 4 Wheel Drive
• The Roadmaster XL Base Plate Kit with Removable Arms item # 179-2, would be the best choice for towing your 4 wheel drive 2000 Chevrolet Blazer. Along with the Tow Ready Adjustable Tow Bar, 5,000 lbs, item # 63180, you will also need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, item # RM-025, and a Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201, to disconnect the tow bar from the Blazer and be able to remove the drawbars. Keep in mind that this tow bar is rated for towing...
  view full answer...


• Parts Needed to Install a Curt Trailer Brake Controller on a 2003 Chevy Blazer
• Brake controllers are not vehicle specific so you can use the Curt Venturer on your 2003 Chevy Blazer. There are a few things that you will need first though. If your Blazer does not already have a 4-Way trailer connector then you will need to add one using # 18252. Then after the 4-Way is installed (or if the Blazer already has a 4-Way) you will need to install a 4- and 7-Way installation kit # ETBC7. The 4-Way plugs into the matching 4-Way on the ETBC7 and the remaining wires will get...
  view full answer...


• Parts Needed To Flat Tow a 2022 Chevrolet Blazer Behind a 2018 Newmar Baystar Motorhome
• Yes, we will have all the components you will need to be able to flat tow your 2022 Chevrolet Blazer. First you will need to select the correct baseplate. The Roadmaster Direct-Connect Base Plate Kit # RM28VR will only fit the 2.0L turbo engine models. While the Roadmaster Direct-Connect Base Plate Kit # RM-523204-5 will work with the 2.5L and 3.6L engines available on the Blazer. Both these baseplates are designed to connect to Roadmaster Direct connect tow bars like the Nighthawk # RM-676....
  view full answer...


• 2024 Chevy Blazer Recommended OEM-Style Roof Rack for Flush Rails
• I have the exact roof rack setup for the flush rails on your 2024 Chevy Blazer! I recommend the Yakima SkyLine FX setup which uses the following parts: - SkyLine FX JetStream Bars # Y38UV - Landing Pad 19 # Y00245 - Lock Core Kit # Y07204 (optional) The FX system looks similar to an OEM system but it will be more sturdy and Yakima has designed the towers to look more aggressive and match the modern style of vehicles. This means you'll not only be getting a system that looks great,...
  view full answer...


• Recommended Flat Towing Base Plates for 2021 Chevy Blazer
• The Demco Tabless Baseplate # DM93FR you were looking at are a confirmed fit on the 2021 Chevy Blazer, and is compatible with Demco Victory Series towbars like the Demco Dominator # DM9511008 and a number of other Roadmaster tow bars without adapters required. If you've got a different tow bar, just let me know what you've got and I can let you know whether an adapter would be required. I've also linked our other base plates that have been confirmed as a fit for the 2021 Blazer. You may...
  view full answer...


• Recommended Complete Flat Towing Setup for a 2021 Chevrolet Blazer
• For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit # RM-523204-5. These are just as good as Blue Ox bae plates and will work with a wide variety of tow bars like the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. These tow bars have a beefy 6,000 lb capacity and will work great with those Roadmaster base plates mentioned above. Next...
  view full answer...


• Bungee Cargo Net Needed for a 4 x 8 Utility Trailer and 2001 Chevy Blazer Are Sizes Stretched or Not
• The size listed on the product page for the CargoSmart Cargo Net, # CS54FR is 36 inches x 48 inches un-stretched. All of our cargo net sizes are un-stretched unless otherwise indicated. This net would most likely be just a bit too small for your utility trailer. I would recommend one of the following two cargo nets. Spidee Stretchable Cargo Net, # EM01018, which is 60 x 72 Inches un-stretched and would be good if you do not stack things too high. And finally, the HitchMate StretchWeb...
  view full answer...