If your 2004 Ford F-53 V8 or V10 motorhome is less than 34-feet long and is equipped with Roadmaster Sway Bar # RM-1139-143 then the correct replacement polyurethane bushing is part # RM-205209-00. Please note this is sold as a single bushing, not a pair. view full answer...
We can get that hardware for you. You'll need part # RHK. Use the provided link to get to the product page. In the proper field, type in the hitch part number, which is C13379, then from the drop down menu, choose Curt. view full answer...
It sounds like you're looking for the Replacement Air Spring for Trailair 5th Wheel Pin Boxes part # LC432404 and Replacement Pin Box Tank Valve for Lippert or UltraFab TrailAir Pin Boxes part # LC156740. I have attached for you below videos I made replacing each of these parts. view full answer...
For replacement black line protectors on the Firestone Coil-Rite Air Helper Springs # F4135 you can use the Replacement Thermal Sleeve # F2135820899.
The Replacement Thermal Sleeve # F2135820899 states that it is for the Firestone Ride-Rite Air Spring Kits, but both the Ride-Rite and the Coil-Rite use 1/4" line. So the sleeve will also fit on the Coil-Rite air line. view full answer...
Yes, the replacement blade for your SnowBear Winter Wolf snowplow is the Replacement Scraper Blade for SnowBear Snowplows - Steel - 82", part # SB324-065.
I have included a product description link below. view full answer...
The correct replacement module for your 909506000 is part # LC379606. We have confirmed this with Lippert on a few different occasions. view full answer...
You'll need to check the number on the side of your pin box. There will be a sticker on the box that will have a number like the popular 1621. Once you know the number you can choose the correct Goose Box from the following:
16K Lippert 0115, 1116 and 1716 Pin Boxes - # RP94716-61301
20K Lippert 1621, 1621HD, and 0719 Pin Boxes (1716 box with Spacer Kit # RP61301) - # RP85FR view full answer...
Yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 is a direct fit for the Retrax Trax rails of your tonneau and comes with everything needed to install. It will slide right into your # RTT-80383.
Yes this is only option to fit directly to your tonneau rails. view full answer...
I have a solution for you, but the Sumo Springs are only sold in pairs, so you would need to purchase a complete kit using part # SSR-114-54. While failure of these is fairly unlikely, they can get damaged occasionally and need replacement, so doing this would leave you with an extra spring to use if you ever have the need to make another replacement. view full answer...
The Roadmaster Front Anti-Sway Bar # RM-1139-189 you referenced only comes as a complete kit. We don't have the bushings or bar available separately. This is the fit for the 2016 Ford E-450 but not the same year F-450 you have in the question fit guide. For the F-450, you would instead use Roadmaster Front Anti-Sway Bar # RM-1139-179. This is a 1-1/2 inch bar and is confirmed to fit. view full answer...
If you want to replace the lens on the # RVPLL13AB with a clear lens you can use the # Replacement Clear Oval Acrylic Lens for Optronics RV Porch and Utility Light # OPT47FR. This lens is designed to fit on the # RVPLL11CB or # RVPLL13CB, which is just the white/clear version of your # RVPLL13AB. view full answer...
The heads of the Equal-i-zer weight distribution systems are different based on the tongue weight rating of the system so you'd have to also replace the head with the part # EQ90-02-1400 with spring bars # EQ90-01-1499 to upgrade your system to a higher rated setup. view full answer...
The correct replacement tarp for the TruXedo Lo Pro QT that fits your 2012 Ford F-150 with the 5-1/2' bed is part # TX577601-CVR just like what you referenced.
You will need to reuse the existing hardware to install the Replacement Header Stop # TX1704187.
The part # TX1115174 is the correct piece you need for the Velcro fastener. I reached out to my contact at TruXedo who confirmed all of this for me and who said you'd need this Velcro piece as well. view full answer...
It sounds like you are going to need either the Replacement Motor for Kwikee Electric RV Steps part # LC379147 or the Replacement Gear Box and A Linkage part # LC379160. I spoke with Lippert and was able to cross reference the info provided so I can confirm these are the correct parts. In order to determine which exact component is creating the noise, I recommend isolating each (unhooking shaft from motor and applying power etc). as that would then give you your answer.
Please note, depending... view full answer...
I'll start out by saying that going with larger wheel and tire combo will not increase the GVWR of your 2019 Thor Four Winds motorhome. In situations like this, your vehicle is rated for the maximum weight that the frame, engine and components are safely rated for without risking damage to the frame or engine.
If you wanted to upgrade to a larger wheel and tire combo, the Westlake # LHAS701 is a Load Range H tire that will provide you with a bit stronger tire and better handling, but... view full answer...
Without knowing the exact tonneau cover you have, we can only give you a couple of options. The best guess is that for your 2012 Ford F-150 with a 6-1/2 foot bed you have the # EX92410 Extang Trifecta 2.0 Soft Tonneau Cover, and for that the correct replacement is the Replacement Tarp is the # EX92410-20. This is a newer model of the Trifecta so let me know if this is correct by checking your model number on your tarp. view full answer...
For the CIPA Custom Towing Mirrors, # CM11550 for your 2015 Ford F-150 please use Replacement Hardware for Custom Towing Mirrors, # CM11553. This is a replacement hardware kit for the 2015-2019 CIPA custom towing mirrors (CM11550, CM11551, and CM11552). It includes 2 wedges, 2 knobs, and 4 felt strips. view full answer...
The Extang Trifecta that fits a 2013 Ford F-150 with 6-1/2' bed and no bed cargo management system is the # EX92410. The correct replacement tarp for this cover is the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Black # EX92410-20. view full answer...
The correct Base Rails for Thule TracRac SR or G2 Sliding Truck Bed Ladder Racks for a 2018 Ford F-150 with 6-1/2' bed is part # TH21501. This would then give you the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501. view full answer...