The replacement breakaway switch for the SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 is the Replacement Breakaway Switch Pin for SMI Supplemental Braking Systems part # SM99905. view full answer...
The correct replacement key for the 005 lock core on your SportRack roof rack is the part # SR005. This is a direct replacement key for lock cores like the one on your system that read "005" without a letter in front of it. We have confirmed this with SportRack.
This will come with one key so I recommend ordering a couple so that you can have a spare on hand. view full answer...
Without knowing what vehicle you have the 7-way connector on, I can give you a few options to choose from. You mentioned having and OEM connector, so that means you will have a US car adapter socket and can use:
Mighty Cord Replacement 7-Way RV-Style Trailer Connector for Factory Tow Package # A10-7072VP Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End # PK11893
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End # HM40975 which is my personal... view full answer...
The replacement part you need is the Replacement Pad Right Rear Foot - Rhino-Rack 2500 Series Legs, part # RR88VY.
I have included the product description link below. view full answer...
It sounds like you're looking for the replacement bulbs only for the Wesbar Low Profile Trailer Tail Lights # 403076 and # 403026. The replacement bulbs for these lights are the Replacement Light Bulb 1157
# A1157B. Since those lights are submersible and will have a seal on the inside of them, you'll want to be careful when removing and re-installing the lens cover when replacing the bulb to make sure there is no damage done in the process. view full answer...
For your 2012 Demco Kar-Kaddy 3 KK370SB, we don't have the specific kit but the wiring used is just a simple 4 way wiring harness in the wishbone style. I recommend using # HM48240 as a replacement for your current harness. I've attached an article to help as well as a video. view full answer...
We do indeed have just the installation hardware available for our trailer hitches, including the Draw-Tite Sportframe # 24872 that you recently purchased.
For a complete hardware kit, you will just need part # RHK. Once on the product page, you will type in the Hitch Item Number (24872) in the text box below the pricing information, along with selecting "Draw-Tite" from the drop-down menu. We will then send out a complete hardware kit for this particular hitch.
The pricing information... view full answer...
The best way to measure an existing leaf spring is to put the trailer up on jack stands and let the axle hang, then measure the center to center distance between the spring eyes. The closest leaf spring we offer to the 26-3/4 inch measurement you mentioned is the # SP-210275 which has a length of 27 inches. Using two of these springs would provide a capacity of 3100 lbs. Keep in mind that the capacity of the trailer will be limited by the capacity of its lowest rated component, be it the... view full answer...
For Lippert awning arms that will work with your manual Dometic awning we have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These will work for you if you have 68"-81" of height between the top awning rail and the bottom of the bracket.
We also have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These are designed to replace support arms that measure 81"-96". If you have an arm length of 63"-68" then the arms you would need are the # LC434716. view full answer...
I doubt a hardware store would have one but you never know. Block # RP3022 could work. the only difference is that the original is 1/4 x 7/8 x 3 inches and this one is 1/4 x 1 x 3 inches. I am sure the frame is wider than 1 inch! view full answer...
I don't have a cross-reference showing bearing numbers that various makes and models of trailers use.
You should be able to find the bearing reference numbers on the bearings themselves. If you cannot locate the reference numbers on the bearing cages, use a digital caliper to measure the journal surfaces of the spindle. You'll need the diameter of the spindle where the inner and outer bearing and where the grease seal rides. I'd also need the diameter of the hub bore on the inside of the... view full answer...
The Replacement Control Module, part # LC301702 is just what you need to replace the Frigette 202-3230 controller on your RV steps.
This unit installs under the step base and requires 4 screws for installation which are not included. view full answer...
The Kwikee 3000 is in the "Level Best" line from Kwikee. We have the correct replacements available. There is the Lippert Replacement Atlas Jack for Kwikee Level Best Hydraulic Leveling System # LC359278 (10,000 lb.) or the Lippert Replacement Atlas Jack for Kwikee Level Best Hydraulic Leveling System # LC359275 (17,000 lb.) depending on what your system is rated for. view full answer...
You sure can order just the hardware kit. You can go to our website and in the search box at the upper right hand side of the page enter RHK. Then you can enter the hitch number and manufacturer name and the quantity. view full answer...
The only way to get replacement arms for your 524430-1, or any other Roadmaster baseplate is to complete the # RM-ARMS "Installation Details" form I have attached below and send it to Roadmaster. view full answer...
Yes, we checked with Thule and Thule OutWay part # TH45JV that you referenced is a confirmed fit for your 2013 Ford Focus sedan with factory spoiler. I attached a review video that shows this rack demoed on a very similar 2013 Ford Focus as yours with a spoiler but it's a hatchback.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on... view full answer...
Go To Results