Good news! I spoke to Extang and the replacement cover you will need is # EX5790.
I have linked it to this page for your purchasing convenience. view full answer...
The Replacement TruXedo Shur-Bond Velcro Brand Fastener for 6-1/2' Beds # TX1115174 will replace the velcro on a TruXedo Lo Pro # TX598301 or Original Edge tonneau for your 2016 Ford F-150 with a 6-1/2' bed. view full answer...
It sounds like you have TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX597601 on your 2006 Ford F-150 with 5.5' bed. The correct replacement tarp for this bed cover is Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX577601-CVR. I have attached a demonstration video. view full answer...
The Truxedo LoPro for a 2010 Ford F-150 Crew Cab with 6-1/2 foot bed is the TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black # TX598101, so the Replacement Cover for TruXedo Lo Pro QT Soft part # TX1117655 will be the correct replacement tarp for this cover.
If you have a different tonneau cover on your F-150 please let me know and I can see which replacement tarp will work. view full answer...
Thanks for that info, and I was able to find that 35830102 is the part number for the Latch Pocket Cover for the Extang Solid Fold 2.0 tonneau cover. We do have that part available, which is the following:
- Replacement Latch Pocket Cover for Extang Solid Fold 2.0 # EX69GR view full answer...
For your 2013 Ford F-150 6-1/2 foot bed the correct rear header is the part # TX5981-RearHeader. The latch you'd need is the part # TX1117424 as it's not included. view full answer...
Yes there is! Per the Firestone Sport-Rite air helper springs # F2320 you referenced, the Firestone replacement air spring # F9000 is a fit for the Firestone Sport-Rite kits F2169, F2181, F2185, F2217, F2320, F2337, F2378 and F2379.
The replacement air spring # F9000 can be used with all the other original brackets and hardware. These springs are sold individually.
I have included an FAQ and installation video for you as well. view full answer...
More than likely the keys and lock core on a replacement knob will not match. It is technically possible, but that would be a total gamble since the lock core is random. We do have replacement keys available depending on your lock core.
I recommend looking at the lock core on your knob to identify the correct replacement key. For example, if you have T255 stamped on the face of the lock core you could use the Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes - Key T255 #... view full answer...
Sure thing!
For your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX597601, you're going to want the:
-Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX577601-CVR.
This is just the cover like you needed and will require all the original hardware and rails for installation. view full answer...
If you are looking for replacement hardware for the Pace Edwards Full-Metal JackRabbit like the # 311-FEF3042 for your 2008 Ford F-150, it truly depends on what hardware you need. For instance, if you need a replacement tailgate seal, that is the # PE99CV.
In order to determine what part you need, feel free to respond with the exact JackRabbit model number you have and the part you need, and I will be happy to point you in the right direction. view full answer...
Based on my research, the AL-KO T-44 axle spindle on your trailer uses the # L68149 inner bearing and # LM67048 outer bearing. I recommend verifying this on your trailer by simply pulling the hubs and checking for the numbers that should be stamped onto the bearings themselves. For the seal I have found typically the Grease Seal part # # RG06-050 is what you need. It has an inside Diameter of 1.719" and an outside diameter of 2.565" This can be verified by checking when you pull the hubs... view full answer...
To replace the tarp of your TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX277601 on your 2007 Ford F-150 you'll need the Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover - Black # TX2776-CVR. view full answer...
We have the Velcro you need for your Access Tonneau cover for your 2012 F-150.
For the hook portion that installs on the top rail you can use part # A60270 for the 17-ft long and 1-inch wide, and part # A30474 for the 17-ft long strip that is 1-1/2 inch wide.
If you need the 1-1/4 inch wide adhesive strip, you can use part # A20790. This is 16-ft long. view full answer...
I have read several reviews online where people with Snowbear Plows like the # SB324-167 were able to use them just fine on their gravel driveways.
The K2 part # K2RAMP8219 that you referenced is a very similar plow but has different turning angles at 22 and 38 degrees whereas the Snowbear has 11 and 22 degrees. view full answer...
From what I could find, the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX5581-CVR will be the correct replacement for your truck. This is a direct fit for a TruXedo Lo Pro # TX558101 which will correspond with the 1113645 number you found on your rail. view full answer...
Thanks for providing that number/date code!
The correct replacement tarp for your TruXedo Lo Pro soft tonneau cover is part # TX577601-CVR. Your cover uses the same seal at the front of the bed and at the tailgate. That replacement part is # TX1704787. view full answer...
We do indeed offer a replacement heating element for the Dometic WH-6GEA RV water heater which we sell as part # DMC74FR.
You'll want to use part # DMC49FR which also includes the needed replacement gasket. view full answer...
Currently the TorkLift SuperHitch Hero Trailer Hitch Receiver # TLF1005H is the only one that will fit a 2010 Ford F-150 that came with a factory receiver. I reached out to Curt and Draw-Tite who both confirmed that their receivers will only fit on trucks that came from the factory with a receiver installed. The TorkLift must have a 10,500lb receiver on your F-150 to bolt to, so as your receiver was removed a factory replacement must be installed to use this option.
You can use a Weld-On... view full answer...