The mirror you have selected, # KS61570F, is the correct replacement driver side mirror for a 2000 Ford Taurus. For the electric/heat features to work, the vehicle OEM mirrors must also have heat and electric functions. The replacement mirror has a round connector that will plug into the factory connector on the vehicle the same as the OEM mirror on vehicles equipped with electric and heat functions. view full answer...
If you lost just one bolt for hitch # 36492 you could get a replacement from a hardware store. There are 2 different bolt sizes with this hitch. There is a carriage bolt, 1/2 inch -13 X 1-3/4 inches, grade 5. And there is a hex bolt, 1/2 inch -13 X 1-1/4 inch, grade 5. A hardware store that knows their nuts and bolts can get you the correct replacement. Make sure it is grade 5.
If you are missing additional hardware the best thing to do is order replacement hardware kit # RHK. Just enter... view full answer...
The Curt hitch we offer for the 2005 Ford Taurus is part # C12232. You can order replacement installation hardware for it by entering the part # RHK in our search box, entering the hitch number C12232 and purchasing the kit.
I have linked two articles concerning hitch installation that may be helpful to you. view full answer...
We do offer replacement hardware for the Curt Hitch part # C12232 that you referenced.
You would need to order the part # RHK. On the product page you would enter C12232 as the part number hitch you have and we would send you out the correct hardware. view full answer...
The fastener kit F36313 in the instructions for the Draw-Tite Trailer Hitch Receiver 36313 can be found on our site as the Kit # RHK. Once on the product page just select the appropriate manufacturer and hitch numbers and we'll send you out the correct replacement hardware. This will fit your 2002 Ford Taurus Wagon so you don't have to get anything different.
Attached is an installation video for you to check out. view full answer...
For the installation hardware for the Curt Class II, part # C12232 you'll need the Replacement Hardware Kit, part # RHK. On the product page, type the hitch part number C12232 into the required field, then choose 1 for the quantity.
I've linked you to the installation instructions for the hitch that you might find helpful. view full answer...
It sounds like you need the two M10 x 1.50 x 45mm CL10.9 hex bolts. These bolts are available in hardware kit # RHK. The picture is just a generic one of some hardware and not the actual hardware. Enter the hitch number to get the right hardware. This will replace all of the hardware, not just the 2 bolts.
The other option is to source the M10 x 1.50 x 45mm CL10.9 bolts locally. It has to be this type of bolt and not the factory ones nor a lower grade. The factory ones are not rated the... view full answer...
We can get that hardware for you. You'll need part # RHK. Use the provided link to get to the product page. In the proper field, type in the hitch part number, which is C13379, then from the drop down menu, choose Curt. view full answer...
Absolutely. You'll need our replacement hardware kit, part # RHK. Once you're on the linked # RHK product page, you'll type # C12232 into the provided hitch model field, then purchase the kit.
This will get you the correct replacement hardware for your Curt # C12232 hitch for your 1995 Ford Taurus. view full answer...