Expert Answers about Ford Expedition
- VN.8532-18J Slide-Out Motor Replacement
- Yes, Lippert 18:1 Venture Actuator Slide-Out Motor Item # LC132682 will work as a replacement if your motor is a Venture through-frame slide-out motor.
view full answer... - Recommended Replacement Lock Core For A Thule 684 Terrapin Cargo Box
- If you are looking to replace the core for your Thule Terrapin cargo box, I absolutely recommend going with the # THLOCKN008 lock core. This will be a direct replacement, double check to make sure it is a different core number, and will fit your cargo box without issues. You will also need the # THKEYN008 key and # 853-1251 change key to remove the old core and secure the new one in place. I always recommend more than one key, just in case.
view full answer... - Adding a 7-Way Trailer Connector to a 2005 Ford Expedition with Factory 4-Way
- There isn't a harness similar to # 118247 that fits your 2005 Ford Expedition with 4-Way connector but I do have a solution that will allow you to add a 7-Way fairly easily and retain the use of the 4-Way as well.
You will need connector # 37185. The 4-Way you have will plug into this adapter. The white wire grounds to the vehicle frame. The other wires will connect to tow package wiring under the vehicle. Follow your 4-Way forward under the vehicle to where it connects to another harness....
view full answer... - Replacement 7-Way Trailer Connector a 2001 Ford Expedition with the HD Tow Package
- For a replacement 7-Way for your 2001 Ford Expedition you can use # 74682 that you have referenced. You will just need to unplug the old 7-Way at the back. In your picture the grey plastic part on the connector is a sort of lock that needs to be pulled out to release the wiring harness from the connector. Just revers the process to install the new one.
view full answer... - Replacement Bull Bar Brackets for 1998 Ford Expedition
- If you have the Westin Bull Bar # 32-0245 or # 32-0240, then you will want the Replacement Bracket Kit for Westin Bull Bar 32-0240 # 32-024PK. Bull Bars are not a universal fit, so you will need to make sure you have the correct one or it will not fit your Expedition.
view full answer... - Recommended Replacement Trailer Connector Socket for Factory 7 Way
- I recommend you use the Hopkins connector, # HM40975, because it comes with a 7-Way and a 4-Way and also comes with a bracket. The connection at the back is made to fit the factory harness on a your vehicle that came with a factory 7-Way. I have included a link to a video that shows a typical installation for you.
view full answer... - Brake Controller Recommendation for 2017 Ford Expedition with Factory 4-Way Connector
- We've found that approaching a brake controller install on a 2017 Ford Expedition with a factory 4-way is easiest if you just convert the 4-way to a 7-way with the part # ETBC7 since accessing the wiring that is only sometimes present on your vehicle for wiring a brake controller is pretty difficult to find.
So you'd want a brake controller like our best selling and performing P3 part # 90195 and the # 22292 to power and provide the brake signal and then you'd use the wiring of the # ETBC7...
view full answer... - Replacement Brackets for Aries Grille Guard 3060-2 on 2007-2015 Ford Expedition Models
- The Aries Grille Guard - 1 Piece - Black Powder Coated Steel # AA3060 or the stainless steel 3060-2 you referenced will use bracket # AABRKT-3060. This is a custom fit for 2007-2015 Ford Expedition models and that specific grille guard.
view full answer... - 7-Way Wiring Kit for 1999 Ford Expedition
- For a 1999 Ford Expedition with factory-installed 7-way the replacement connector is part # A10-7072VP. For a combination 4-pole/7-way instead you could use # HM40975. Both connect with a round U.S. Car Connector like the one shown in the linked photo.
If the Expedition has no factory trailer wiring you can still have a 7-way. You will start with the plug-and-play 4-pole kit # 118344 which installs at your tail light connectors with no cutting or splicing. If you need only basic lighting...
view full answer... - Replacement Bracket Kit for Westin Bull Bar 2001 Ford Expedition
- As long as the bull bar was specifically designed to fit a 2001 Ford Expedition like the Westin Ultimate Bull Bar with Skid Plate Chrome part # 32-0240 or the Westin Ultimate Bull Bar with Skid Plate Black part # 32-0245, then the correct replacement mounting bracket kit is the Replacement Bracket Kit for Westin Bull Bar part # 32-024PK.
view full answer... - Front Floor Mats Complements Tan Interior of 2004 Ford Expedition
- For great front floor mats that will complement your tan interior of your 2004 Eddie Bauer Ford Expedition is the WeatherTech Front Auto Floor Mats - Tan # WT450291. These mats are custom-designed to fit the exact contours of your Expedition and come with the WeatherTech lifetime warranty. To top it all off, they are 100% made in the U.S.A.
view full answer... - What is the Correct Replacement 7-Way Trailer Connector for a 2002 Ford Expedition
- We do have a replacement 7-Way for the 2002 Ford Expedition. You can use # C55774. The 4-Way wiring harness, # 118344 would be for a vehicle that did not come with any wiring harness. And # 118242, is a fit for certain model and year F-150 and F-250 trucks.
view full answer... - Replacement Brackets and Mounting Parts for Fastway e2 Weight Distribution Hitch
- To replace the brackets on a Fastway e2 # FA94-00-1000 with round bars you will need the following parts:
Replacement Outer Link Plate for Fastway e2 Sway-Control Bracket # FA93-02-5350
Replacement Inner Link Plate for Fastway e2 Sway-Control Bracket # FA93-02-5200
Replacement Hardware Kit for Fastway Sway Control Brackets # FA92-02-9200 or bolt only with the Replacement Bolt for Fastway e2 Sway-Control Bracket # FA93-02-9270
Replacement Sway-Control L-Bracket for Fastway e2 Weight...
view full answer... - Replacement Clips for Weight Distribution System
- We have a few different clip options that are possible fits for your Weight Distribution (WD) system.
Fastway WD - FA94-02-1059
Curt WD - 17109
From the picture that you sent me, I believe that the Curt clips # 17109 are the correct replacement clips for you.
view full answer... - When to Replace Hitch Pin
- Minor corrosion can be addressed with cleaning and coating the pin to prevent further issue but if your pin is bent I suggest you replace it.
As for the useable life of a hitch pin, that cannot be established due to too many variable such as environmental conditions, and use during time frame. To put a definitive length of time toward usability is difficult however, if you have damage in any way, including bending, I would immediately replace before it possibly fails.
We have a wide...
view full answer... - Replacement Blue Ox Sway Pro Spring Bars for Trailer Tongue Weight
- Using spring bars that are rated for a higher capacity can lead to a rigid trailer ride. An over-rated weight rating on your spring bars can even cause bounce leading to traction issues with the trailer.
I definitely recommend getting the spring bars that are rated for your specific trailer and vehicle using the total tongue weight. The total tongue weight is the loaded trailer tongue weight along with any cargo weight behind the rear axle of the tow vehicle. That weight combination...
view full answer... - Replacement Parts for Curt 10K MV Weight Distribution System
- The Curt MV Weight Distribution System part # C17062 is composed of the following parts:
Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution part # 17109
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000 lbs part # A-6
Replacement Lift Handle for Curt Weight Distribution Systems part # C17112
Replacement Lift Bracket for Curt Weight Distribution Systems part # C17008
Replacement Bolt Kit for Curt MV Weight Distribution Systems part # C17076
Curt...
view full answer... - Replacement XL Fang for Blue Ox Patriot Braking System
- According to my contact at Blue Ox, the # BLU34FR is the XL fang that you're looking for so you'll want to use this on your 2017 Ford Expedition. This can be used with any Blue Ox Patriot braking system like the Patriot # BLU37TR system to adapt to the larger pedal on your vehicle.
view full answer... - Replacement U-Bolt and Plate for Trailer with 2 Inch Square Axle
- For a 2 inch square axle you are going to want u-bolt plate # TRTP200175. The hole spacing on center is 2-5/8 inches by 2-3/8 inches. For matching u-bolts go with # SP01-160. They have a 9/16 inch diameter.
I have included a link to a video review for you for the u-bolts.
view full answer... - Which 4-Way Wiring Harness Fits My 2004 Ford Expedition
- The Curt T-Connector Wiring Harness # C55384 is what provides your 2004 Ford Expedition with a 4-way connector by plugging directly into the 7-way harness that is included with the factory tow package.
If you only have a 4-way that is hard wired into the Expedition then I recommend cutting off the existing defective plug and hardwiring a new one with the Curt Wiring Harness # C58044.
view full answer...
Go To Results