We have everything you'll need to tow your pop up with your 2019 Ford Escape. You need a hitch like the Class III # e98866 which is a confirmed fit for your vehicle, has plenty of towing capacity, and is mostly hidden as well. You will need trailer wiring as well to activate the blinkers, turn signals, and running lights of your vehicle as well which we offer that as # 118802. I attached install videos for both of these on similar Ford Escapes.
Since you wanted to do some towing you might... view full answer...
The Hopkins universal mounting bracket part # HM48625 would be a great option to use as a mounting bracket for the connector of the # BX88206. view full answer...
I spoke with my contact at Yakima and if you have the Yakima SwingDaddy 4-Bike Rack you need the Replacement Swing Arm Assembly, # Y8890312. The bolt is not sold separately. view full answer...
The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 # CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 # CE26212G. You will need U-Bolts, like the # CE15284GA, to attach the brackets to the frame, but you should be able to reuse the rest of the hardware you currently have. view full answer...
I have attached for you below the full list of replacement parts we offer for the Reese 5th Wheel Trailer Hitch part # RP30047. That said, not all components are replaceable so if it's not on this list odds are it is not offered separately.
Replacement Fifth Wheel Bumper part # 58089
Replacement Handle Kit part # 58055
Replacement Crossmember Head Support part # RP58147
Replacement Head part # RP58146
Replacement Base Legs part # RP30727
Replacement Pivot Pin part # 58484 view full answer...
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
240 lbs of tongue weight would work... view full answer...
We have exactly what you are needing on the linked page.
If you are needing a hub and drum assembly then we have part # 8-257-5UC3-EZ from Dexter which fits the description you mentioned and is compatible with a 7" brake assembly. It comes with the EZ Lube grease cap, but that can be used for a standard spindle as well.
For just a standard idler hub we have part # 8-259-5UC1-EZ from Dexter which, again, fits the description you gave and comes with the EZ Lube grease cap.
Both hub assemblies... view full answer...
We don't have replacement lock cylinders with the number 2818 but you can replace your cylinder with any of the Thule cylinders on our site. You will need the cylinder # THLOCKN168, the matching key # THKEYN168 (I recommend getting at least 2 of these), and the Universal Change Key # 853-1251 to install the cylinder.
If your box has 2 cylinders then you can either get 2 of the lock cylinders or simply order part # TH450200 which comes with 2 cylinders, 2 keys, and the change key. view full answer...
The hardware pictured on the Replacement Hardware Kit for Trailer Hitches # RHK is for a specific hitch. When you go to that product page, you need to type in your hitch number and select the manufacturer from the drop down menu. We will make the kit for your specific hitch and send it to you, so you will have all the hardware for your unique trailer hitch receiver. view full answer...
We can provide emplacement hardware to install a Curt # 13650 Class III hitch on your 2008 Escape. You would use part # RHK. On the product pate, type the hitch part number into the provided field, choose Curt from the drop-down menu and choose a quantity of 1.
I've linked you to an install video showing the hitch being installed on a 2009 Escape. The procedure on your 2008 would be identical. view full answer...
If you are referring to the removable attachment tabs then, yes, we do have that part. You will want part # BLU57XR. I have included a link to a video review of this part for you.
If this is not the part you need then I have included a link to the installation instructions for Blue Ox base plates # BX2605. There is a parts break down that you can use to identify the part needed. view full answer...
The Replacement Hardware Kit # RHK will give you the hardware you need for the etrailer Trailer Hitch Receiver # e56AR on your 2008 Ford Escape. When ordering the kit you will need to include the hitch manufacturer and hitch number to ensure you receive the correct hardware for your receiver.
If you are installing this on a different vehicle than the original we also have the T-One Vehicle Wiring Harness # 118551 to give you a 4-way flat connector. view full answer...
Yes the first step when installing the Curt trailer wiring harness part # C56335 is to disconnect the negative battery terminal of your 2015 Ford Escape. I also attached a link to an install video for this kit on a similar Ford Escape for you to check out as well. view full answer...
We have exactly what you will need. The Curt Replacement Hardware Kit for Trailer Hitches part # RHK will give you all of the hardware you need to get the hitch installed. Below you will find the instructions linked for specifications and a video we did on a 2017 for your reference. view full answer...
My research indicates that grease seal part 125255UC has an outer diameter of 1.980-inches and this correlates with the hubs that use bearing # L44649. The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
You can confirm the seal size by measuring a spindle at the point where the seal rides (point B in the linked image)... view full answer...
To get the hardware for an already purchased hitch receiver, you can use the Replacement Hardware Kit for Trailer Hitches # RHK. You just enter your hitch number in the box and then select the manufacturer from the drop down. We will assemble a kit for you based on that information that will give you everything you just asked for. view full answer...
It is always recommended to replace all of the mounting hardware when re-installing a trailer hitch.
The Draw-Tite # 75758 is confirmed as a fit for the 2017 Escape.
To order new hardware for the hitch you just need to go to # RHK. Then enter the hitch number in the appropriate box and choose Draw-Tite from the drop down menu. Add that to your cart and the kit will be assembled for you. view full answer...
You can get a replacement hardware kit for your trailer hitch on your 2001 Ford Escape with the # RHK but you will need to put the manufacturer of your hitch and the appropriate hitch into the fields on the page. Once we receive that, we'll match your hitch and send you out all of the replacement hardware that would normally come with that particular hitch. The hitches that are designed to fit your 2001 Escape are listed below by their manufacturer.
Draw-Tite: # 75118
Curt: # C13506
Curt... view full answer...
Go To Results