It looks like we do have the Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2-Prong PL-10 Plug - 6" Lead # B162-49 that will definitely fit your 164R lights. Unfortunately, Peterson does not offer a pigtail that has pass-through capabilities at this time.
However, what you may be able to is use something like the Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1 # SWC502905-1 to quickly and easily splice one black wire to the next. view full answer...
The Firestone Air Ride system that fits your 2013 Ford Van and uses the 6781 air bag is the Firestone Ride-Rite Air Helper Springs # F2153. The correct replacement parts are listed below:
- Replacement Air Spring for Firestone Ride-Rite Kit # F6781 (this is the 6781 bag)
- Replacement Lower Bracket for Firestone Ride-Rite Rear Helper Springs # F5092
- Replacement Carriage Bolt for Firestone Air Springs # F2135821149 (x2)
- Replacement 3/8"-16 x 7" Carriage Bolt for Firestone Ride-Rite... view full answer...
The replacement for your factory 7-way on your 2004 Ford E-450 Box Truck is the Tekonsha Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector, # 74682. This will give you a 7-way and 4-way connection with a simple factory socket the industry calls the U.S. Car Type Connector. There is no splicing needed. I've attached a review and an install video for you.
The Tow Ready Replacement Wiring you mentioned, # 118243, was for up to 2001 models with only the 4-way factory connector. view full answer...
The recommended 55A replacement for your Parallax 7300 would be the Progressive Dynamics # PD4655V for flooded lead acid, AGM and Gel batteries.
Progressive Dynamics offers a 1000 watt pure sine-wave inverter/transfer switch, part # PD1210SR that would be a good choice if a 2000 watt surge/1000 watt running output would meet your needs.
I've linked to product description videos for the items mentioned above. view full answer...
I suggest the Progressive Dynamics, # PD9260C as a replacement for the Magnetek 900 series. This Smart converter charger has a multistage charging process switching modes to ensure a quick, complete charge. It converts AC shore power to DC power to run 12V loads at the campground and quickly charge your RV batteries. This will provide continuous power to your DC breaker panel to run 12V loads and works with flooded lead acid, AGM, and gel batteries. view full answer...
Depending on the 7-way connector you presently have, we might have a very easy solution for you.
Take a look at your existing 7-way, and see if it's possible to unplug the factory harness from the back of the connector. There will be a gray locking tab that needs to be slid toward the front of the vehicle before the connector can be unplugged. If it's possible to unplug the harness, the Tekonsha # 74682 would be a perfect plug and play replacement.
If you cannot unplug the connector from... view full answer...
I have a solution for you, but the Sumo Springs are only sold in pairs, so you would need to purchase a complete kit using part # SSR-114-54. While failure of these is fairly unlikely, they can get damaged occasionally and need replacement, so doing this would leave you with an extra spring to use if you ever have the need to make another replacement. view full answer...
We have isolators like the Deka part # DW08771 which was designed for this situation. It will charge both batteries while also keeping them separate which means they wouldn't be in parallel. view full answer...
The only ladders we currently carry are a universal style, with only a few minor differences in height and paint jobs. You can get the endcaps, support legs, and replacement steps for the Stromberg Carlson Exterior RV Ladder # LA-401, but you can't get just half of the ladder alone.
If you do end up replacing your ladder with this I highly recommend sealing up your mounting holes with butyl tape # AL28FJ and some silicone sealant. view full answer...
According to Lippert, the closest they can get to the 22 inch by 6-1/2 inch bolt pattern of your existing step would be the # LC372261 Kwikee 32 series, which has a 22 by 8 inch bolt pattern. Although you'd need to drill a couple of holes, the Series 32 would be your best bet as they don't have a 2 step option that would match up exactly to your existing bolt holes.. view full answer...
From what I could fine it looks like the correct replacement for your 2002 Ford E-450 is part # WM9072F. This is a 32 mm jam nut so I do recommend double checking what you have to ensure that this fits. view full answer...
Currently we have either the Power Mirrors # KS61104F & # KS61103F or Manual Mirrors # KS61062F & # KS61063F for your 1996 Ford E-Series Super duty vans. If you are looking for the extended mirrors commonly found on converted chassis you will want to check out Velvac for those types of mirrors. view full answer...
Yakima refers to the part you're needing as a clip spacer for their 1A RainGutter Towers, part # Y00101.
The replacement plastic clip spacers aren't available individually, they are included in the # Y8810136 replacement hardware bag, so potentially you could need both the # Y8810136 parts bag as well as the # Y8810008 replacement boots. This being said-as outlined in step 10 of the linked instructions you will not need the clip spacers if the backs of the roof rack feet do NOT touch the... view full answer...
We do have the correct replacement converter/charger for your system.
- Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers # PD4645V
The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers # PD4645V works with Parallax/Magnetek model 6345 and has an integrated Charge Wizard. view full answer...
The wheel we have that matches the specs you asked about comes from Taskmaster:
- Vesper Steel Dual Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot # TA56FR
The only thing that doesn't match is that this has a silver powder coat finish as opposed to the galvanized finish. Unfortunately we don't have any wheels like this with that finish you're looking for. view full answer...
If you are wanting to replace your Series 39 electric step directly then what you will need is the Lippert Kwikee 39 Series Electric Step # LC3724742 which comes with the motor, gears, control module, and switch kit with the wiring adapter.
Attached is a wiring diagram (which some of the connections are already completed) and an installation video for you to reference if you are going to be doing the installation yourself. view full answer...
It sounds like you're looking for a replacement spring for a rear Firestone Ride-Rite system on your 2005 E-450 Class C motorhome.
The part # F9000 that you mentioned won't fit your application but we do have replacement air bags that should, depending on what air bag kit is installed on your motorhome:
Air Bag Kit # F2153 - Replacement Air Spring # F6781
Air Bag Kit # F2377 - Replacement Air Spring # F6397
If you have something else please let me know so I can assist you further. view full answer...