Sounds like there are some wiring connections not made. To power your 120 volt style interior lights from a battery you will need to have the wiring ran from the battery to the inverter and then to the lighting. You'll have to go over the wiring of the lighting to see if it is also ran to a battery or inverter.
The brake lights of the trailer are on a totally different circuit. view full answer...
If you have the newer 53" Thule SquareBars # TH712400 then you can use the Rapid Traverse Feet # TH480R and Fit Kit # THKIT1043 for the naked roof on your 2000 Dodge Caravan. If you have the older Thule square bars that don't have the T-Slot opening on the underside then you would need the discontinued Thule Traverse foot pack which is available individually as part # TH75222479002. The fit kit # THKIT1043 would still be used in this case as well.
If you'd like to add locks to the roof... view full answer...
The etrailer brand Class III hitch, part # e98901 fits all models of the 2018 Dodge Durango except for SRT models.
I have no way to look up what size wheels your Durango is equipped with, but I found that either 265/60-18 or 265/50-20 were the available stock sizes. As the description states, you won't be able to stow the spare under the vehicle if it's mounted on a wheel larger than 18 inches.
You should be able to read the tire size on the sidewall of the spare. If the size ends in... view full answer...
Both Firestone and Airlift make spacers for their air bag systems that will close the two inch gap you have on your 2008 Dodge Ram. They are the:
Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2 item # F2366
Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 2" Lift - Qty 2 item # AL52420 view full answer...
For your 2018 Dodge Journey I recommend the # 118536 Tekonsha T-One Wiring Harness with 4-Pole Flat Trailer Connector. This wiring harness is a custom fit for your 2018 Journey with LED taillights. It has a quick and easy installation and plugs in to existing wiring.
I spoke with Tekonsha and they said that this would be the correct wiring harness even though your turn signal uses an incandescent bulb.
I have attached an installation video of the wiring harness on a 2018 Journey for your... view full answer...
We do have a trailer hitch receiver that fits a 2005 Dodge Durango Limited, but it is different than the model you referred to. I checked with Curt and can confirm that the correct hitch for your '05 Durango Limited is the Curt Trailer Hitch Receiver # 13297.
This is a complete bolt-on installation and I have added a link to the instructions for you to check out. If you are looking to tow with your Durango and do not have the factory tow package wiring harness I recommend adding the T-One... view full answer...
I'm pretty sure that the Brophy Clamp On Camper Tie-Downs # HSSF will fit your 2012 Ram 1500 just fine since we have had others with similar model years get them to fit, but since these are universal tie-downs I don't have a way to confirm this on my end. With that being said, I'm attaching a photo showing the dimensions of these tie-downs for you to compare with your side rails to make sure that they fit properly.
If they do then all you need to finish your setup is the Brophy Basic... view full answer...
A sliding hitch is recommended with the 2009 Dodge Ram to tow the Keystone Sprinter to have enough cab clearance when making turns. As long as your pin box is not a turning pin box (doesn't rotate) you will need a sliding hitch with the short bed truck.
I do recommend an autoslide hitch Demco 18K Hijacker part # DM8550034 and the Demco Hijacker custom rails for the bed part # DM8552016-71. The Hijacker is one of the easiest to use sliding fifth wheel hitches on the market because you don't... view full answer...
In order to install the Demco Autoslide 18K 5th Wheel Trailer Hitch part # DM8550034 (Must Have Side Plates for Demco Autoslide 5th Wheel Trailer Hitches - Above Bed Mount part # DM6003) on a 2013 Dodge Ram 3500 you'll need the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit part # DM8552026-71 which is composed of the Universal Above-Bed Base Rails part # DM6071 and Demco Premier Series Custom Mounting Brackets part # DM8552026.
Unfortunately, we don't offer the... view full answer...
Yes, the Hopkins EasyLift Truck Bed Tailgate Lift Assist part # 74211 is a confirmed fit for a 2006 Dodge Dakota per EasyLift. We have also confirmed this with customers as well as you can see from the review attached below. Please note, the truck's tailgate is lighter than most full-sized which the product is designed for and that is what causes the issue they mentioned.
The DeeZee Tailgate Assist Custom Tailgate-Lowering System for Pickup Trucks is indeed not a fit. view full answer...
We unfortunately do not currently have any roof rack options available for a 2015 Dodge Grand Caravan so the only option we currently have for you to haul around your roof top tent would be to use a trailer like the Yakima EasyRider Double Decker Trailer # Y08129. This would allow you to haul the tent as well as many other accessories.
This would require that your van has a trailer hitch and 4-pole wire harness. If you don't have these then you can use the etrailer Trailer Hitch Receiver... view full answer...
Yes, the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs # AL52300 although designed for the LoadLifter 5000 and the LoadLifter 5000 Ultimate air springs will also work with the # AL57595 XL springs.
Both kits utilize the same fittings so these lines will work just fine, the only difference between the 5000 and the 7500XL is the size of the bags and the 20 percent increased air volume. view full answer...
Yes! The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 is confirmed to fit your 1997 Dodge Ram 2500 4x4 with the Cummins engine. The hitch comes with all mounting hardware included.
Also, you will be able to attach the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT to that setup. If you need a hitch pin for the plow to attach to the hitch, I recommend the # C21504. view full answer...
For your Dodge truck the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # DT45505 is designed to work well with your truck. I reached out to the manufacturer to confirm the fit on your cab and chassis dually model.
You may also want to consider the etrailer Ball Mount Kit for 2-1/2" Hitches - 3-1/2" Rise or 5" Drop - 18,000 lbs # EBMK25518 and wiring harness # C55317 for a basic 4-way flat trailer connector. If you plan on towing large trailers with electric brakes... view full answer...
Yes, the Roadmaster Direct-Connect Base Plate Kit # 266-3 will work with your Roadmaster Sterling All Terrain, Non-Binding Tow Bar # RM-576. However, the EZ Hook safety cables included with Roadmaster's Sterling tow bars will not work with direct-connect base plates. These cables connect to an anchor plate on the Quick Disconnect crossbar, which will not be present when you are using these base plates view full answer...
The Curt Trailer Hitch Receiver part # C13280 for 1987 - 2004 Dodge Dakota includes grade 8 hardware bolts. It is a 2" receiver with a concealed cross tube so the only portion of the hitch that is visible once installed is the receiver portion. I have attached an installation video for your reference. view full answer...
Because the # BWRVK3050 is designed for use on a flat bed, it's designed to sit in the recessed box found on trucks with flat beds installed on them. Because of that, the portion of the hitch designed to fit into the Turnover Ball hitch itself wouldn't be long enough for the hitch to be secured in your truck. Even if it would fit, you wouldn't have the required 5-6 inches of clearance between the underside of the trailer loft and the top of the bedsides, which could cause the loft to collide... view full answer...
We have exactly what you need! When we installed the etrailer.com Trailer Hitch Receiver # e98854 on a 2013 Dodge Grand Caravan we found it was about 13-1/2 inches from the ground to the top of the receiver. You mentioned the height to the bottom of the coupler of your 2020 NuCamp T@G Tear Trailer was 16 inches, you need a ball mount with approximately 2-1/2 inches of rise.
The best option for this is the Curt Ball Mount # C45067 with Pin and Clip # C21500 or Trailer Hitch Receiver Lock... view full answer...
The gross towing weight rating for the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" part # C15809 is 20,000 lbs with or without the use of weight distribution. The tongue weight rating is also 2,700 lbs with or without the use of weight distribution according to Curt.
You do want to make sure you are not exceeding the tow weight rating for your vehicle that can be found in the owners manual. view full answer...
Go To Results