Expert Answers about Dodge Dakota
- Will the K Source Universal Clip-On Extra Large Towing Mirror # KS3891 fit a 2008 Dodge Dakota
- After looking up what your mirrors look like it appears as if the K Source Universal Clip-On Extra Large Towing Mirror # KS3891 that you referenced should work well on your 2008 Dodge Dakota.
Check out the review video I attached for this product also.
view full answer... - Tailgate Lock Options for a 2002 Dodge Dakota 4-Door
- The Pop & Lock Tailgate Lock # PAL9900 that you referenced is a correct fit for all models of the 2002 Dodge Dakota.
Please note that we also offer a power lock option for your truck (if it is equipped with power locks), the Pop and Lock # PAL8100. This lock wires into your truck's power lock system and installs without drilling.
view full answer... - Adapter to Attach Blue Ox Tow Bar to Roadmaster EZ Base Plate
- There is a tow bar adapter that you can use to attach your Blue Ox tow bar to the Roadmaster EZ base plates you have, with the adapter being the following part number:
- Roadmaster Tow Bar Adapter # RM-032
The # RM-032 will work with Blue Ox Acclaim, Adventurer, Aladdin, Alexxa, Allure, Alpha, Ambassador, Avail, Aventa, Aventa II, Aventa LX, and Kar Bar motorhome-mounted tow bars, as well as Blue Ox A-frame towbars with 1- or 3-pronged attachments.
view full answer... - How To Increase Cooling Power for a 1999 Dodge Dakota R/T
- I do have a way to help cool down your 1999 Dodge Dakota R/T but the 5/8" pilot hole of the Derale 18" Rigid, Aluminum-Blade Race Fan - Belt Driven part # D17518 will be much too small to work with the factory fan clutch.
Instead, I recommend first removing the factory clutch fan and installing the Derale 12" High-Output, Electric Radiator Fan part # D16925. This radiator fan will attach directly to your vehicle's radiator and will provide up to 2,150 CFM which will be more than sufficient...
view full answer... - Would the Timbren System # TDDR052 Work Well in a 2005 Dodge Dakota Towing a 7,000 lb Boat
- The 6,000 lb capacity of the Timbren Rear Suspension Enhancement System # TDDR052 refers to vertical weight in the bed of your truck. This system would have plenty of capacity to work for your 2005 Dodge Dakota towing a 7,000 lb trailer.
This should help you stabilize everything at highway speeds, but you should note that trailer tires are all rated at 65 miles per hour as their max unless otherwise stated.
I attached installation instructions for this product for you to check out also.
view full answer... - Fit of Westin Perfect Match Series Rear Step Bumper # 31012 on 2001 Dodge Dakota SLT Quad Cab
- My contact at Westin confirmed that their Perfect Match Series Rear Step Bumper # 31012 is indeed a confirmed fit for your 2001 Dodge Dakota SLT Quad Cab. This bumper bolts on using included hardware without any need for drilling and it offers 300-lb tongue weight and 3000-lb towing capacities.
You need only to add a hitch ball with a 3/4-inch diameter shank, such as TowReady # 19258.
view full answer... - Which Tailgate Locks Will Fit a 2010 Dodge Dakota Big Horn Edition
- We do have tailgate locks for the 2010 Dodge Dakota, all models. Instead, I have included a link to a page with the tailgate lock options for your truck.
view full answer... - Will the Yakima RocketBox 12 on the Vortex Aero Crossbars on the # Y02-490B for a 2005 Dodge Dakota?
- I went ahead and reached out to my contact at Yakima, and she said that while they cannot confirm that the Yakima RocketBox Pro 12 Y07191 can clamp around the Vortex Aero bars on the # Y02-490B on your 2005 Dodge Dakota, she said they should work.
If you want something that will definitely clamp around the bars, I recommend theThule Sidekick Roof Mounted Cargo Carrier Box - 8 cu Feet # TH78GC or the larger SportRack Vista XL Cargo Box - 18 cu Feet # SR7018. Both of these roof boxes come...
view full answer... - Will Reese Strait-Line Weight Distribution SnapUp Brackets Fit 5x1-3/4 Inch C Channel Trailer Frame
- The snap up brackets included in the Reese Strait-Line Weight Distribution system will fit up to 2-1/4 inch wide channel frames. The height does not matter. As long as there is enough clearance up at the nose of the trailer frame, you should not have a problem. Sometimes propane tanks or lock boxes on the nose of the trailer will prevent the brackets from being installed in the proper location. The chains need to be vertical. The connection point of the chain on the spring bar should be...
view full answer... - Replacement Bumper for a 2004 Dodge Dakota
- The correct bumper for your 2004 Dodge Dakota is the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit item # 63000-93800.This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed. This bumper has built-in hitch ball holes, a 3,500 lbs capacity, and includes a custom mounting kit.
The Westin Fey Diamondstep Rear Bumper item # 20002 is for full size trucks.
view full answer... - Will Curt Hitch Fit with Bumper Hitch Ball Removed From 2007 Dodge Dakota
- Yes, all you need to do is remove the hitch ball from your 2007 Dodge Dakota and you'll be able to install the Curt Trailer Hitch Receiver # 13229!
view full answer... - Will Roadmaster Even Brake Supplemental Braking Fit a 2000 Dodge Dakota
- I checked with Roadmaster and they do not show any restrictions for the 2000 Dodge Dakota and the Even Brake, # RM-9400, so you can use it with your truck. You will want to consult the vehicle owners manual for specific information on flat towing the truck.
Most states do require a supplemental braking system when flat towing. The Even Brake is a proportional system that will apply the Dakota brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and...
view full answer... - Brake Control Wiring Adapter for 2010 Dodge Dakota
- If your Dakota was equipped with the towing package that includes the 7-way connector on the rear bumper, part # 3020P is the correct Brake Controller Wiring Adapter. Part # 3021P is for the full-sized Dodge Ram.
If your Dakota was not equipped with the OEM tow package, you will need to hardwire your controller using our Brake Controller Installation Kit, part # ETBC6 if a 6-way connector is needed, or ETBC7 for a 7-way.
I will provide a link that will explain in detail how the Brake...
view full answer... - Curt Class III Receiver Hitch for 1999 Dodge Dakota
- Curt actually offers two different Class III hitches for the 1999 Dodge Dakota. The Curt # C13280 features a square crossbar tube that will be concealed behind the truck's bumper. The only visible portion of the hitch would be the receiver tube right under the back bumper. The Curt # C13145 uses a round tube crossbar, most of which would be visible from behind the vehicle. Both hitches would install in the same manner, as you can see from the instructions I'll link to, and both hitches...
view full answer... - Brake Controller Plug For Tekonsha Brake Controller On A 2011 Dodge Dakota
- Yes, in order to install the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 on your 2011 Dodge Dakota you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3020-P for a plug and play installation. The plug that the above adapter uses will be located under your dash, near the emergency brake pedal.
I have attached an install video on a Ram but it will be similar to your Dakota.
view full answer... - Will Westin Fey Diamondstep Rear Bumper # 63000 Fit 2000 Dodge Dakota Sport Extended Cab
- Yes, according to my contact at Westin, their Fey Diamondstep Rear Bumper # 63000 is a fit for your 2000 Dodge Dakota Sport Extended Cab and you will also need the installation kit. For both items you can order part # 63000-93800.
view full answer... - Front Suspension Enhancement for a 1995 Dodge Dakota 4 Wheel Drive
- Yes, the Timbren Front Suspension Enhancement System, item # TDDF1004, will fit on the 1995 Dodge Dakota 4 wheel drive with 3.9 liter engine, and a 6-1/2 foot bed.
If you have an 8 foot bed model you willl need to use the Timbren Front Suspension Enhancement System, item # TDDR1002, on your 1995 Dakota.
view full answer... - Front Suspension Enhancements for a 2000 Dodge Dakota
- As long as your 2000 Dodge Dakota is 4WD then yes the SumoSprings Solo Custom Helper Springs part # SSF-204-47 will work well to reduce front end sag while using a snow plow. If you are looking for a snow plow setup, I recommend using the Curt Front Mount Trailer Hitch Receiver part # 31080 with the Detail K2 Avalanche Snowplow part # K2AVAL8219. The Detail K2 Avalanche has an 82" wide blade, electric winch with in-cab controller, and flip down caster wheels to move the plow while not attached...
view full answer... - Trailer Hitch Receiver and Wiring For a 2008 Dodge Dakota
- For your 2008 Dodge Dakota I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75251. It is a confirmed fit for the 2005-2011 model years. The Class III receiver is capable of supporting 500lbs of tongue weight and trailering 5,000lbs with a standard ball mount. With a weight distribution hitch the weight limit increases to 800lbs of tongue weight and 8,000lbs trailer capacity. Be sure to verify your weight capacity of your Dakota and use the lower of the numbers as your maximum...
view full answer... - Trailer Hitch Recommendation for a 2003 Dodge Dakota Quad Cab
- For the 2003 Dodge Dakota, there are specific trailer hitches that will fit all models INCLUDING the quad cab. Take a look at Curt hitch # C13145. The instructions I have linked do specify that it fits 2 door and 4 door models.
I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring, if needed, use # 118329. I have included a link to the installation details for the wiring as well.
view full answer...
Go To Results