The Draw-Tite Trailer Hitch # 36448 is a confirmed fit for your 2008 Avenger R/T and is a great fit for your light-duty towing and hitch rack needs. The hitch exceeds industry strength standards.
The recommended wiring for your vehicle is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118445. I have added a link to that part.
The recommended ball mount is # 36065 and I have added a link to that part too.
If you require a 2" diameter hitch ball we recommend #... view full answer...
The Edge Insight Monitor, # EP84030 will work well on your 2013 Dodge Avenger 2.4L. Using this monitor will allow you to keep a close watch on vital engine data. The WatchDog also features the Mileage Coach that will give you a good indication of how your driving habits affect your fuel economy and overall engine performance. The Mileage Coach basically teaches you the best driving habits in order to maximize fuel economy in your Avenger.
Please keep in mind that using this monitor will... view full answer...
Yes, the Draw-Tite trailer hitch # 24871 fits all models of the 2013 Dodge Avenger including your SXT. I have included a link to a video showing installation. The model in the video has single exhaust but installation for dual exhaust models would basically be the same.
If you plan on doing any towing then the correct ball mount to use is # 3594. For a 1-7/8 inch ball you can use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56211.
If you want to use the hitch... view full answer...
You are correct Hidden Hitch is the brand name of the Class I hitch, part # 60288 (no longer available), for your 2008 Dodge Avenger. All of the hitches for the Avenger are going to be somewhat visible because access is needed to insert and pin the drawbar into the hitch.
I added a drawing that shows how the hitches are positioned on your Avenger, see link.
If I were selecting a hitch for the Avenger I would go with the Draw-Tite Class II hitch, # 36448, because it will not be any more... view full answer...
I checked the availability of WeatherTech floor mats for your 2008 Dodge Avenger RT and found that WeatherTech does make semi-custom fit floor mats for your vehicle, but they do not make custom fit floor mats.
I have attached a link to all of the WeatherTech floor mats that will fit your Avenger. This list includes the front and rear floor mats. The mats are available in tan, gray and black.
Based on my research, WeatherTech does not make custom fit floor mats for the 2010 or 2011 models... view full answer...
Universal towing mirror # KS3891 can be adjusted to fit on the left or right side mirror. You would need 2 if you wanted one on each side. We have several other universal towing mirror options. I have included a link to them for you to view. view full answer...
Your 2010 Dodge Avenger can be fitted with either a light-duty 1-1/4-inch Class I hitch like Draw-Tite # 24871 or a higher-capacity Class II type like # 36448. If you have a Class I hitch you need to use the recommended ball mount shown on the hitch page, but if you have a Class II hitch like # 36448 you can select a compatible Class II ball mount with the specific amount of height rise or drop you need to keep the hitched trailer level and with the length you need for good clearance between... view full answer...
Pittman Outdoors, the manufacturer of the # 341033 Rear Seat Air Mattress tells me that the mattress is recommended for mid-sized cars, so it should be a perfect fit for a mid-sized car like your Avenger. To be absolutely certain, you could measure the inside distance between the inside of the rear doors and the available width between the back seat and the rear of the front seats. If these dimensions are at least 55" x 35-1/2", the mattress would work perfectly for you.
If you click the... view full answer...
As long as the U-Haul trailer has a 4-Way Flat connector then yes, the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11142274 for your 2013 Dodge Avenger is compatible with it.
The 4-Way Flat connector is the most common connector that activates the trailers lights. If the trailer has brakes then you would probably need a 7-Way, but I am pretty confident it has a 4-Way. view full answer...
There are a number of bike racks that will work with your 2013 Dodge Avenger, just keep in mind the center of the hitch pin hole to the edge of the bumper is about 6-1/2 inches with the Curt Trailer Hitch Receiver # C11133.
That's a pretty good distance, so you'll need a bike rack with good bumper clearance, and there is a bike rack that you can use which is compatible with the Curt hitch that fits your 2013 Avenger, and also have the clearance needed so they won't come into contact with... view full answer...
Go To Results