Expert Answers about Dodge Journey

• What is Needed to Install the Yakima RocketBox Pro 14 Cargo Box on a 2011 Dodge Journey
• The Yakima RocketBox Pro 14 Cargo Box, part # Y07192, will fit your 2011 Dodge Journey if you have the factory roof rack with cross bars that run from side to side. If your 2011 Dodge Journey has just the factory installed side rails that run from front to back you will need to use the Inno Square Bar Roof Rack, parts # INB127 and # INFR. These parts will attach to your factory side rails and supply the cross bars that are needed for attachment of the Yakima RocketBox cargo box. The last...
  view full answer...


• WeatherTech Front Floor Mats For a 2011 Dodge Journey With Two Drivers Side Floor Board Hooks
• We do have WeatherTech floor mats for your 2011 Dodge Journey with two hooks on the drivers side floor board, however, the WeatherTech Front Floor Mats, # WT462241, are only designed for vehicles with one hook. Instead, take a look at the WeatherTech Front Floor Mats, # WT443771. These mats are designed for models with two hooks on the drivers side floor board to floor mats from sliding around. These floor mats are also available in gray, # WT463771, and tan, # WT453771. I have attached...
  view full answer...


• 7-Way Extension For Use With Saris Door County Bike Rack
• Happy to help you out, and the 7-way extension Evangeline used in the video on the 4Runner of the Saris Door County Bike Rack for 2 Electric Bikes # SAR42RR is the TorkLift Wiring Harness Extension # TLW6036. This is a total of 42 inches long, which may be a bit too long for your application so I think the better option is the 32 inch long TorkLift Wiring Harness Extension # TLW6028.
  view full answer...


• Trunk Mount Bike Rack Compatibility with Dodge Journey 2015
• The Thule Gateway Pro 2-bike trunk mount carrier you'd mentioned, part # TH88VR is compatible with your 2015 Dodge Journey and with the ~30 lb weight of each of your bikes. Just a fit note: DO NOT use your rear wiper with the rack in place, it'll be damaged. For the Verve Lowstep women's model, you'll want to use a frame adapter bar like the Swagman # 64005. The adapter bar will span the distance between the seat post and the handlebar stem, providing a level spot for the bike to attach...
  view full answer...


• Trailer Hitch That Fits 2017 Dodge Journey SXT AWD
• We have a trailer hitch that will fit your 2017 Dodge Journey SXT AWD, but the etrailer trailer hitch # e98845 will NOT fit your '17 Journey SXT models with AWD. The tech note you referenced states, "Hitch does not fit SXT models with AWD." For a trailer hitch that does fit a 2017 Dodge Journey SXT with AWD the only confirmed fit is the Draw-Tite # 76225 which is a Class III hitch with a 2" receiver. This hitch is a complete bolt-on installation so no drilling in your Journey's frame is...
  view full answer...


• Will 2 Highland Roof Top Luggage Bags Fit the SportRack Vista Roof Mounted Cargo Basket w/ Extension
• The inside dimensions of the SportRack basket with extension SR9035-9036 are 60-7/16" x 37" wide x 4-1/2" tall. The Rightline roof top duffel bag # RL100D90 is 36" x 16" x 13" so 2 of them will fit easily in the basket.
  view full answer...


• Fitting a Thule Force XT Rooftop Cargo Box to a 2013 Dodge Journey
• The Thule Force XT Rooftop Box, part # TH6358B, will fit factory crossbars that are no larger than 3-1/2 inch wide and 1-11/16 inches tall. I contacted Thule and they confirmed that this should fit your crossbars. An additional measurement you'll want to take is the distance from the middle of the front crossbar to the nearest part of your hatch when it is open. This will give you the maximum clearance of the roof box to not impact the use of the rear hatch. For the Thule Force XT,...
  view full answer...


• Trailer Hitch that Fits 2014 Dodge Journey
• We have hitches that fit your 2014 Dodge Journey like the etrailer # e98845 but we have no reference of a hitch with the part number you mentioned so that would not be something we could help with. If you'd prefer a more hidden hitch that fits your vehicle the Draw Tite part # 76225 would be your best option.
  view full answer...


• Does 7-Way of ETBC7L Have to be Mounted to Fascia Using Draw-Tite Hitch 76225
• Greatly appreciate the nice words, and I wish I could be as helpful here, but the 7-way of the # ETBC7L does have to be mounted to the fascia of your 2018 Dodge Journey when installing the Draw-Tite # 76225. The reason for that is how this specific hitch installs, directly behind the bumper and with the receiver dropping down. So there isn't enough room for a second bracket to stick out either forward or backwards for the bracket of the 7-way to latch onto. There also isn't enough space...
  view full answer...


• Roof Rack Recommendation for a 2016 Dodge Journey with Factory Side Rails
• Yes, I do recommend the Thule AeroBlade Edge roof rack # TH7502-TH7503 for your 2016 Dodge Journey with the factory side rails. This roof rack comes with everything needed and attaches directly to the side rails. I have included a link to a video showing an example installation for you. This roof rack is also available in black, # TH7502B-TH7503B.
  view full answer...


• Comparing Trailer Hitches for 2015 Dodge Journey
• The Curt Trailer Hitch # C13201 and etrailer.com Trailer Hitch # E98845 are essentially the same but with a different finish; the Curt hitch has a gloss black powder coat finish and the etrailer hitch has a matte black powder coat finish, and some people do prefer one finish to the other. Both of these trailer hitches will fit your 2015 Dodge Journey and will install the same way, without requiring any drilling. Additionally, both have a 4,000 lb towing capacity, 400 lb tongue weight capacity...
  view full answer...


• 4-Way Wiring Harness for 2018 Dodge Journey GT With LED Taillights and Incandescent Turn Signal
• For your 2018 Dodge Journey I recommend the # 118536 Tekonsha T-One Wiring Harness with 4-Pole Flat Trailer Connector. This wiring harness is a custom fit for your 2018 Journey with LED taillights. It has a quick and easy installation and plugs in to existing wiring. I spoke with Tekonsha and they said that this would be the correct wiring harness even though your turn signal uses an incandescent bulb. I have attached an installation video of the wiring harness on a 2018 Journey for your...
  view full answer...


• Can a Small Radiator Fan be Used on a Motorcycle Oil Cooler
• Derale 4" High-Output Extreme Paddle Blade Electric Fan - 125 CFM Item # D16104 could work but it is a puller application meaning it is meant to be installed behind a cooler core and pull air through it. You might not have the space for a puller fan on a motorcycle. The smallest fan we have that can be used as a pusher is # FLX106 which is 6-1/2 inches in diameter.
  view full answer...


• Trailer Wiring Harness for a 2013 Dodge Journey with LED Tail Lights
• Since your 2013 Dodge Journey has LED tail lights you will want to use trailer wiring harness # 118536. The wiring harness that you referenced, # 118495, only fits the 2010 Dodge Journey and will not fit a 2013. I have included a link to the installation instructions for you. To answer your other question, wiring harness # C56330 installs and works the same way as # 118536. It is just a different manufacturer, Curt. If given the choice I would go with Tow Ready harness # 118536 because...
  view full answer...


• Curt Trailer Hitch Installation on 2016 Dodge Journey
• Some hitches do cause a full-size spare to no longer fit under the vehicle. Vehicles with the smaller donut-type spare tires usually avoid this issue. When we install this hitch on a 2016 Journey that vehicle had a donut spare. I reviewed the instructions for Curt Hitch # C13201 (these are linked for your reference) and while they do note the need to temporarily move the spare tire for hitch installation, no mention is made of the spare no longer fitting after the hitch is installed. It...
  view full answer...


• Hitch and Wiring Harness for 2010 Dodge Journey
• The towing capacity of the vehicle itself is based off of the engine and transmission and a number of other factors and not simply just the trailer hitch. Since your Dodge Journey did not come equipped with the factory towing package you should stay under the towing capacity and tongue weight recommendations in the owner's manual for the 3.5 liter engine without towing package. This is the capacity of the Journey as determined by Dodge and unfortunately it cannot be increased by adding...
  view full answer...


• Trailer Hitch Receiver for 2017 Dodge Journey Crossroads
• Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 76225 will fit your 2017 Dodge Journey Crossroads. This hitch does require a bit more for installation as drilling of the plastic rivets and removal and trimming of the rear bumper cover are required. You may also need a special tool to reinstall the new plastic rivets. But you do end up with a concealed hitch tube and do not sacrifice any ground clearance. If you want a simple bolt in installation you can opt for the etrailer Trailer...
  view full answer...


• Will the Rightline Cargo Hatch Saddlebag fit a 2014 Dodge Journey
• The 2014 Dodge Journey has a small spoiler at the top of rear hatch. Because of that spoiler you will not be able to hook in the car clips, # RL100605, or use the Rightline cargo bag, # RL100B90. The clips and straps would put too much stress on that spoiler. What I recommend is a cargo bag that can mount to a naked roof or vehicle with a roof rack, see link. Rightline bag # RL100S30 is a popular option. I also recommend a protective pad, # RL100650, to protect the roof when using the bag.
  view full answer...


• Weight Distribution Shank For 7 Inches of Drop For Curt Trunnion Style Weight Distribution 17300
• We do have exactly what you need in order to get the drop you need for your Curt Weight Distribution System 17300. The shank that came with the 17300 gave a maximum drop of 1/2 inch, and there is a shank that adds 7 inches of added drop that will work: - Curt Weight Distribution Shank # C17124 This will give you a maximum of 9" of drop with your Curt trunnion bar system, so it can handle the additional 7 inches you are looking for.
  view full answer...


• How to Determine if Engine and Transmission Cooler Will Fit
• The way to find out specifically if the Derale Electra-Cool Combo Engine and Transmission Cooler Assembly w/ Fan # D15200 will fit your 2018 Dodge Journey is going to require some measurements. The reason for this is that these coolers aren't specifically made to fit any specific vehicle, they can be mounted so long as you have the room in your Journey to do so. If you take a look at the cut out I added for you, the directions specify that it can be "mounted anywhere space permits." This...
  view full answer...