Expert Answers about Chevrolet
- Where is the Igniter Cap for the Furrion RV Cooktop - Triple Burner - Stainless Steel # FGH4ZSASS
- The igniter cap for the Furrion RV Cooktop - Propane - Triple Burner - Stainless Steel # FGH4ZSASS is the black button on the top of the cooktop, next to the burner control knobs.
I have attached a picture for you to see the igniter cap and the knobs.
view full answer... - Are Putco Optic 360 High Power LED Fog Lamps for 2019 Chevy Silverado 3500 DOT Compliant
- I reached out to Putco for you who told me that yes, the Putco Optic 360 High Power LED Fog Lamp Bulbs # P250001W that fit your 2019 Chevy Silverado 3500 are DOT compliant.
Additionally they have a 360 degree lamp angle and a cool white color, so you won't get people flashing their headlights at you, you'll just be more visible, in a good way. I have added a link to a video review for you to check out as well.
view full answer... - Will the Original Custom Towing Slide-on Mirrors, item # CTM1600, fit 2007 Chevy new body style?
- Yes, the Longview Slip Over Towing Mirrors, item # CTM1600, will fit the factory power mirrors on your 2007 Chevrolet Silverado, new body style.
view full answer... - Stainless Steel Tube Steps Fit For a 2000 Chevrolet Silverado
- The Westin E-Series Nerf Bars, # 23-1680, that you referenced on our website will fit on your 2000 Chevrolet Silverado if it is an extended cab, 1500 or 2500 Light Duty. If you have a Regular Cab, then you will want to use part # 23-1400.
These are both polished stainless steel tube steps and they come with everything you need to complete the installation. I have also attached a link to all of the tube steps we carry for your truck for you to check out.
view full answer... - Front Mounted Hitch Receiver For 2023 Chevy Silverado 2500 With Most Ground Clearance
- Good question, and the front mounted trailer hitch receiver for your 2023 Chevy Silverado 2500 that has the most ground clearance is from EcoHitch; the correct fit for your truck is the following part number:
- EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH57FR
The # EH57FR measures approximately 13-1/2 inches from the bottom of the receiver to the ground, which is more than any other hitch. It is also the strongest hitch for your truck, with the highest line pull rating of 10,000...
view full answer... - Wire Gauge Used on Optronics MCL95AB LED Clearance/Marker Lamp
- The power wire on the Optronics # MCL95AB clearance light is 18 gauge, which is sufficient for the super-low power consumption of an LED lamp. To see an installation video, click the provided link.
view full answer... - What Can be Done to Help Rock Tamers Bolts Keep From Loosening
- What you can do to keep the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108 from loosening up - along with torquing to spec - is apply some Loctite Blue Stick Threadlocker # LT37614.
The Loctite Blue # LT37614 will help secure the bolts and keep them from loosening, but won't permanently affix them so the bolts will still be removable if need be. Just keep in mind it takes a full 24 hours for the Loctite to fully set.
view full answer... - Can Trailer Battery Be Charged While in Use
- A battery cannot be charged and discharged at the same time but if you have a charger connected to a battery that is delivering power to a load then it can look like you are both charging and discharging at the same time.
It is best to charge a battery individually, not two connected together, and to do so without a load on the battery.
Your battery charger will ideally be matched to your battery; both come in various amp hour (Ah) capacities. For example, the CTEK Multi 25000 # CTEK56674...
view full answer... - How to Determine the Correct Weight Distribution System for 3,200 lb Travel Trailer
- In order to choose the best weight distribution system for your travel trailer you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your 2017 Chevy Colorado.
The tongue weight is typically between 10% and 15% of your trailer's GVWR but you'll want to verify it by using a scale such as the etrailer Tongue Weight Scale # e99044. From there, simply add on the...
view full answer... - How To Register the etrailer Portable Inverter Generators
- The product registration for the etrailer 6,000-Watt Portable Inverter Generators part # 333-0003-2-0007 will be done though Firman Power on their website as they are the ones who make the etrailer Portable Inverter Generators for us. Once you obtain the generators you can note their serial number and flip to page 34 in the owner's manual for warranty and product registration information which is also attached for you.
view full answer... - How to Prevent Tonneau Cover Water Leaks
- The truth of the matter is that tonneau covers are not 100% leakproof. Do most of them, especially the higher quality ones like the # BAK39133 BAK Revolver X2 do a very good job of keeping the vast majority of the water out? Absolutely. Will they keep all the water out, especially in a continuous hard rain? Possibly not. Anyone who tells you that their tonneau cover will never leak isn't being completely honest with you.
I've seen a $ 250.00 cover that you can drive through a car wash...
view full answer... - Is the Kodiak K2HR79E Rotor Able to be Separated from the Hub?
- The Kodiak Disc Brake Kit # K2HR79E is not able to be separated, but I do have another option available.
The Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs # K71-635-90 will use the same bearings and will be able to be separated, making replacements easier if needed. The E-coat finish provides corrosion resistance for freshwater and limited saltwater use as well. With this also being made in the U.S.A., it will be a great option.
view full answer... - Replacement Pitch Arm & Washer For Solera 69 Standard Flat Awning Support Arm
- There isn't an available replacement bolt and nut from Lippert for the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm - Black # LC375994, so a new arm would be required if yours is damaged. There is a replacement washer though that is needed when replacing the arm, the Replacement Retaining Washers for Solera Pitch Arm Assembly # LC431583.
view full answer... - Does Reese 49912 Weight Distribution System Provide Sway Control
- Long story short, the # RE94FR DOES provide sway control.
The Reese 49912 Reese Pro Round Bar Weight Distribution which we offer as part # RE94FR offers effective weight distribution for trailers with tongue weights ranging from 400-800 lbs and offers sway control that works great for resisting mild to moderate trailer sway.
view full answer... - Can a 2017 Chevy Cruze With Manual Transmission be Towed on a Tow Dolly
- I used a search engine to look up the owners manual of your 2017 Chevy Cruze and it stated that your vehicle can be towed on a dolly.
For this I highly recommend the Demco Kar Kaddy X Tow Dolly with Disc Brakes - Tilt Bed Frame # # DM9713093 or Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable # DM9713045 because of how much easier they are to use than other dollies.
The Kar Kaddy X tilts down and the Kar Kaddy SS has a ramp so you can simply drive up the dolly and secure your car...
view full answer... - Can Super Springs Suspension Stabilizer and Timbren Aeon Springs Be Used Together
- You could indeed use both at the same time if you cared to, as they would fit but it isn't necessary. I'd recommend going with the Timbren # TGMRCK15S only, as that kit offers 8600 lbs of capacity which is plenty. This kit isn't compatible with XFE package-equipped models.
In all honesty, if your weight distribution kit is properly rated for your trailer's as-towed tongue weight including the weight of anything stowed in the truck bed behind the rear axle, and the system is set up correctly...
view full answer... - Does Roadmaster Comfort Ride Leaf Spring System Need Wet Bolts or Bushings
- So there are not specific bushings and wet bolts available for the Roadmaster Comfort Ride Leaf Spring Suspension Kit with Shock Absorbers - Tandem 5K Trailer Axles # RM-2460-2560, and the good news is that you do not need them. Adding those parts would be spending money on something that wouldn't be an improvement, and I'll explain why for you.
The Comfort Ride actually comes with Never Fail bushings, which are an upgrade over standard bushings because they are self-lubricating and are...
view full answer... - Should All Trailer Leaf Springs be Replaced at the Same Time
- When you are replacing a leaf spring you definitely want to replace all of the leaf springs on your trailer. The reason for that is leaf springs wear down over time and by replacing them at the same time ensures you will have even support on both sides of your trailer without any sag or lean.
In regards to the correct replacements, that is going to depend on whether or not you have double-eye springs or slipper springs, your trailer's axle rating and most importantly, a number of measurements.
The...
view full answer... - Weight of the B&W Companion Hitch for Chevy Factory Prep Package
- The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package # BWRVK3770 is a very well made product. I only have the shipping weight of 256 lbs so it is most likely right around 250 lbs. Just the head of the hitch # BWRVC3006 can be removed and installed separately. That hitch head weighs 74 lbs.
view full answer... - Will the RoadActive Suspension RAS54FR Lift the Back of the Vehicle Once Installed?
- I spoke to a tech over at RoadActive Suspension and the # RAS54FR can lift the back of the truck up a little once installed. He did mention that it shouldn't really be noticeable and at most will be about an inch once completed especially on a new vehicle. It can be more if the suspension is getting a bit worn out, however.
view full answer...
Go To Results