Yes, the Westin HDX Grille Guard with Punch Plate part # W82AQ which is a fit for a 2023 Chevrolet Suburban will interfere with any front mounted sensors or cameras if present. There's not much you can do about the cameras but in regards to the sensors such as those for park assist etc., you might be able to disable these from the in-dash settings.
Please note, there are no other options which won't interfere with the front sensors or camera. view full answer...
If your Suburban has a factory tow package we have a plug-in adapter for your Hopkins Agility Brake Controller, part # HM47294.
The plug-in is part # HM53075. This just plugs into the port that is located in the wiring panel underneath the dash, to the left of the steering column, near the emergency brake pedal. view full answer...
The Trailer Valet XL, part # TVXL2 with 2 inch ball and the # TVXL25 with the 2-5/16 inch ball are meant for use on level surfaces only, they wouldn't work well on the slope you describe..
Actually, I have a much less expensive and easier to use alternative. I'd install a front mounted receiver like # C31073; the front hitch will allow you to easily put that camper right where you want it, slope or no slope, every time. view full answer...
It'll depend on how much fender/frame clearance you currently have.
Going with a larger tire such as the ST235/75-15 # WST54FR tire would increase the tire diameter by about 2 inches and the width by about an inch. This will move the top of the tire about 1 inch closer to the inside top of the fender or wheel well and about 1/2 inch closer to the trailer frame to the inside.
With the trailer loaded up as you'd typically have it, you want to see 4 inches of clearance above the tire (3... view full answer...
According to my contact in the Engineering department at SuperSprings the correct SumoSpring fit for a 2015 Suburban 1500 would be # SSR-204-40. According to them, the SumoSprings # SSR-204-40 springs will remain functional down to -25ยบ F. Operating in temperatures below that won't harm anything, but the SumoSprings wouldn't be very pliable at those temperatures so the ride quality would suffer to a degree.
I've linked you to a product description video for the # SSR-204-40 SumoSprings. view full answer...
Tire balancing is not required for our wheel and tire packages like the Kenda KR25 ST145R12 Radial Trailer Tire with 12" Aluminum Wheel # AM31208. Since trailer tires are designed for supporting heavy loads rather than providing a comfortable ride and traction like on cars they do not have to be balanced. This does not mean you can't balance the tires but do understand you would want to have them rebalanced over time since trailer brakes often lock up and would cause the tires to get out... view full answer...
To choose a sliding tray for your Suburban you will need to know the size of the cargo area behind the seats that are being used.
After you take that measurement you can select the tray very simply. If you are looking for a 1,000-lb tray and only have about 45-inches behind the seat you can check out part # CG1000-4147. The tray is 41inches long and 47-inches wide and has a 1,000-lb capacity.
I have attached a link to the sliding trays we offer you can take a look at. In the first part... view full answer...
Yes it will; the vertical load capacity is 500 lbs for the hitch so that's the limit on any type of carrier (and it's accompanying cargo). So as long the motorcycle carrier is 200 lbs or less, you can carry a 300 lb motorcycle with your 2019 Chevy Suburban with the Curt Front Mount Trailer Hitch Receiver # C31073.
For example, you could use the 58 lb Motorcycle Carrier w/ Ramp # e98873 the 358 lb total weight of the carrier and your bike would be well under the 500 lb limit of the hitch. view full answer...
Even if the key in your 2005 Chevrolet Suburban is in the off position, the auxiliary circuit will still have power.
If you are concerned about the trailer drawing power while the Suburban isn't running, I recommend unplugging the trailer. Another option would be to install an isolation solenoid like part # PK5231201 on the power wire for your 7-way connector. Once connected to an ignition switched power source, the auxiliary circuit would only be hot when your key is in the on position. view full answer...
You will need to measure the bolt holes and make sure everything will fit in the area you want to install the unit.
Then make sure that you will be able to drill mounting holes in that area and make sure that you will not damage anything under the area that you will be drilling into.
MORryde RV Cargo Sliding Tray - 48" x 42" - 1 Way Slide - 60 Percent Extension - 800 lbs # MR73FR.
This unit weighs 91 pounds and is 42 inches wide by 48 inches long. This unit comes with mounting hardware.
Just... view full answer...
We do not offer any two room tents. The SUV tent we offer is part # RL110907.
This tent is a one room tent that measures 8-ft long x 8-ft wide x 7-3/16 ft tall. This tent will work with minivans, SUVs, wagons, and trucks with caps. The prices for any of the products we offer is shown on the product page on our website. view full answer...
I spoke with my contact at CIPA regarding the Custom Towing Mirrors, # CM10200, for your 1994 Chevrolet Suburban. Each of the custom towing mirrors that CIPA offers are designed around the original equipment (OE) for that vehicle.
In this case, during testing they found that the design for the drivers side mirror should be different than that for the passenger side. The size difference between the two mirror housings is not a design problem just a difference. view full answer...
When the floor mats are installed, they will butt right up against the undercarriage of the second row seats. The seats themselves slide forward independently of the undercarriage which remains stationary, so the mats will not interfere with the movement of the seats in any way. view full answer...
Go To Results