Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Ford Edge with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (88 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Harness still working well. Installation video was extremely helpful and mtg bracket for plug makes a tidy application. Very pleased.
Installation video very helpful and most likely couldn’t have completed it without it. The installation was difficult and took several hours. Product is very good quality and works well.
Wire in perfectly on my 2017 Edge Sport. The only complaint (more a suggestion than complaint) is the mounting bracket for the connector. When you press the trailer connector into the bumper connector - or putting the connector cap back on, the bumper connector can pop backwards out of the mounting bracket. My wife's 2014 Escape mounts on the hitch and is solid. Maybe bring the mount off the side of the hitch? Black bumper is my Edge, silver bumper is wife's Escape.
More of a minor nuisance and recommendation rather than a complaint. Otherwise I've had no problem with the harness.
The product looks to be good quality just as I expected. Installation should be a snap. I've always had good service from Tekonsha
The video's made installation fairly easy. An extra set of hands would have made the lifting the hitch assembly easier but using a few blocks and using the bolts as pins to install one side at a time I was able do to the job by myself. The trailer products are high quality and I following each step in their video as I preformed them. I chose to chop up one of the original Ford plastic covers under the bumper and reinstall it around the hitch for a cleaner original look (it also provides more support to the original plastic bumper piece above the hitch).
The ease it was to install was amazing. It took me 38 minutes (- jacking up the SUV), 1 extra pair of hands for a total of 5 minutes and that was it.
My daughter is going to buy one and Yep I was volunteered to install it.
The wiring was more difficult then I expected. they show a 2018 edge in the video which must have more clearance in the body panel. As a retired mechanic I worked for about 35 minutes on 1 side and decided to simply splice the wires and pull from the top and solder and heat shrink them underneath the SUV. the second side took 15 minutes. I am not sure why there was so much difference but I was able to get it done and as you can see looks fine and you cant see any splices.
It took 5 hours to put it in. Impossible to pull the plugs up to the tail light opening. Will not purchase this product again. Ended up having to cut the plugs off the wiring and then crimp them back together. etrailer is still wonderful. Great prices and quick shipping. Love you guys, just hated installing this product.
I installed this harness on my wife's 2017 Ford Edge Sport. There is something different about the Sport model, as Ford did not offer it with a trailer package. I previously took it to a trailer rental place that installs hitches, and they put on their brand of hitch and wiring. It did not work properly, Brake lights would not work. After they had it back 3 times, they told me they could not make it work and there must be something in the original wiring. So I bought this electrical harness from etrailer and replaced the old one with this one. It now works. Installation is not bad, but not easy either. One tool you will need is a coat hanger to fish the wires through. Took me about 4 hours. This was mostly fishing wires, and finding places to run them that is not right next to the muffler on the Ford Edge. Looks like a quality product at a good price. I only gave it four stars because I have not really used it yet, so I hope it will hold up.
Calvin
8/25/2019
I have now used this harness on my wifes Ford Edge Sport for about a year, and it has performed without a problem.
Overall a very good product. Works great, although I have only used it once.
I didn't like the large rectangular splice blocks, as they are bulky. I wanted to put most of the wiring inside the vehicle and the blocks wouldn't fit through the holes available. I cut off the blocks and substituted my own splices. In the end I am very happy with the product/installation and I would buy this product again.
Don
5/11/2019
I dont use my trailer very often, but have had no issues.
Simple, secure connections and no splice connectors! Perfect. The installation video made the project easy, even without a hoist. The original one I ordered was out of stock and they actually called (!) me on the phone to let me know that this was the same item from a different & reliable manufacturer.
Robert
8/29/2020
Still working fine
Received this hitch in only a few days after it was ordered and the order arrived complete. Between the written directions and an available video I was able to install it in less than hour by myself. The only downside was/is that it sits a bit lower than an OEM hitch and as such will occasionally cause it to drag when entering/exiting a driveway. Nothing you can't live with, but just be aware it can happen.
I also ordered the wiring harness at the same time for the Edge and it also came promptly and within a few days. This was a bit more challenging to install, but again the directions and an available video made it a DIY install. Removing the tail light assembly without scratching the paint or breaking something was the fun part. They don't just "pop out" so be persistent!
I had Rack Attack install this on a dedicated tow vehicle (Ford Edge Sport) so i can't speak for the ease of install but I have had absolutely no problems with this unit. At the time I just provided the installation videos on etrailer to my installer. I bought a number of other products from etrailer including a wireless brake controller and a Curt Class III hitch which was all installed at the same time. Everything has been working fine and I hardly know it is there.
2018 Ford Edge Titanium: I couldn't get the plugs from the bottom of the car to the top via a coat hanger or any other device. Finally decided to cut the wires (from the box) and fish them down into the bottom of the car. I spliced the cables back together with a heat shrink marine splice and weather proof like a good electrician on a 10,000 Volt cable (smile). That took some doing, but yes, the kit works well. I don't like the idea that the converter box is under the car exposed to elements. Overall, I would order the kit again and make quicker time of it by splicing the wires. The 2018 Titanium Edge just didn't have enough room for the plugs to be fed from the bottom.
The product fit as expected and installation was fairly simple. The wiring kit originally ordered was for a Sport model and does not work with a SEL with a Sport package for some reason. etrailer was very helpful in returning the incorrect part and replacing it with the correct wiring kit needed.
Product was as advertised. I just over thought my ability to install it. Not sure why there is a separate power wire form the battery to the trailer wiring. Wondering if it will work with out that additional wire? Product is what I wanted, I will have to get someone else to install it.
Mike L.
3/30/2019
A powered taillight converter will draw its power from a direct connection to the vehicle battery, but will gain its switching information via its connection to the vehicles taillight harness or tow package connector. Years ago, taillight circuits in vehicles used higher gauge wire and had enough capacity to handle the draw of the vehicle taillights as well as those of a trailer. Now that the price of copper has gone through the roof and vehicle manufacturers try to save all the weight and expense they can, the taillight circuits use smaller gauge wire that can handle the load from the vehicle taillights but not much else. Drawing the power directly from the battery also serves to isolate the tow vehicles sensitive electronics from any short circuits that might occur in the trailer wiring. Connecting the converters power feed anywhere other than the battery or where the converters manufacturer recommends can leave your vehicles electrical system exposed to possible damage. The harness will not work unless that wire is connected to the battery terminal.
Arrived very quickly and the free shipping was a huge plus for me!
Used this class 3 hitch on my 2016 edge sport. Works great, all that is visible is the receiver. Took me about 1 1/2 hrs to install. Wiring harness that was recommended worked well also. Space is tight behind the tail light housings for the connector, but it will fit.
The guys at etrailer are awesome, I made the mistake of ordering the wrong part so I called to have the issue fixed and the customer service was awesome, they handled the issue flawlessly with no drama, shipping was fast and spot on when it came to tracking, if I need anything in the future I will be ordering it from etrailer, I highly recommend them
Product was good to install. Hardest part was hot wire to the battery. 10 gauge wire with 40 amp resettable breaker. Product works great.
Breaker was about $5 at auto parts.
I ordered a drawl tight trailer hitch to go on my Ford edge it fit perfect and it’s exactly what I ordered real fast shipping product is great the The wiring harness fit just like it was supposed toI Will buy from this company again they got great service excellent people to do business with I highly recommend them
The trailer hitch and wiring kit was delivered quickly and the installation videos provided made it super easy to do it myself. I also greatly appreciated the personal follow-up by George, who confirmed my order was correct and everything shipped promptly.
I did have the wiring harness installed at a local hitch installer, it took them about an hour. It seems to work well so far on my Edge Sport.
I installed the tow bar in 2 hrs lying on my back with 6" block under tires alone with a milk crate holding up bar. The snake lines worked perfectly. Good product. I'll work on wiring next sunny day. Tks. Great product
Not the first time I've bought one of your hitches! They always arrive in a timely manner. Comes with complete instructions and all needed hardware. I'm 70 years old and installed this myself, with a minimal amount of cussin!!
The harness works as expected. Only issue I had was I had to cut and splice it since there was not enough space on the car to push the harness from the taillights to under the car.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Russell
9/8/2023
My hitch and wiring have performed flawlessly for the last year. I have towed countless different trailers and absolutely no concerns!