To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Customers prefer these similar products
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1692 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.Definitely love these tie downs. I can convert my truck into a camper in less than five minutes and they securely hold the slide-in no matter the road conditions or terrain we are crossing.
Would have given it 5 stars except I am a little disappointed with the paint quality. Most parts had chips and spots of bare metal right out of the box. Installation was a breeze though and everything fit perfectly! I still would recommend this set, but if you have the extra $ maybe the aluminum version would be worth it if you are worried about rust? Too late for me though...
Holly smokes that was some fast shipping! Ordered in the evening and the package was delivered just after noon, the next day.
Great quality and easy installation. Made it possible to go pick up & haul my new camper.
Received my order without any issues. Installation was easy, as advertised. First use went well.
Thank you
excellent quality
A+ for fit, finish and ease with mounting. Do not believe Turnbuckle angle is proper not allowing enough forward tension or pull on Camper. Also , filling up with gas requires dismounting turnbuckle to access gas fill door.
Directions to install were very good. Had to drill a 7/16" hole through 1/4" steel on each side of the leaf spring hanger bracket (no fun at all). Driver side install has perfect alignment. Passenger side would not align horizontal to ground like driver side. Emailed customer service and they responded quickly and effectively. They provided and alternative which made the alignment better but not as good as the driver side. Still functional.
Not very happy with the finish. The paint (powder coat) was the worst and kept peeling off everywhere. A spray-can of Rustoleum made it all good!
The TorkLift tie-downs do a great job. The package arrived promptly and I am happy with the service.
Very sturdy with solid mounting hardware.
Works very well for anchor points of 2500lbs and more.
Paint could be better, mine have rust developing on all 4 corners.
So I'll just have to clean them up and repaint them.
But as for the strong build, I'm very glad the design is solid....
Installing them was relatively simple, but you should tell people that they need short drill bits. There is little room between the frame and pickup box, unless you have a angle drill. Also in the instructions you have bolts that need to be torxed down but I only found two of the three you list. I would give you five stars but for what you get they are overpriced.
Easily bolted on to my 2013 F-250 Super Duty. It's not often something is truly "bolt-on", as stated in a vendor's description of items without some type of modification. These were a nice change of pace and somewhat enjoyable to install. I found the instructions to be sufficient.
Ez to in stall about 10 minutes on the rear ones and about 30 minutes on the front on a 2012 f 250 super duty not bad at all
Perfect product. Amazing service! Caroline B. really made it happen for me when I called to expedite shipping. I needed the parts before the weekend in order to pick up a truck camper several hours from my home prior to leaving town. Caroline corrected the order, cancelled the original, and had it shipped within 20 minutes. She followed up with emails on tracking as well as delivery. etrailer always has such amazing service, and Caroline really came in clutch for me. Thank you!!!
I just received my product from etrailer several days early. Everyone I dealt was extremely helpful and friendly. I will not hesitate to purchase from them again.
Service from etrailer was great. Torklift tie downs fit perfect and easy to install. I wish everything that was "bolt on" fit like this.
Installed for a 2800# slide in camper. Installed easily and worked perfectly for holding the camper in place.
Just what I needed to tie down the truck camper securely to the frame of the truck. Easy installation with understandable directions. Great staff and products!
Excellent service and great products
Great service and easy install
Amazing setup!! Brackets fit great!! Instructions were very detailed and correct!! Definitely recommend this product to all truck camper enthusiasts
Amazing setup!! Brackets fit great!! Instructions were very detailed and correct!! Definitely recommend this product to all truck camper enthusiasts
Provides for great stability when carrying older slide -in camper.
Easy bolt-on tie downs that are easily stowed out of sight, and also offer excellent stability and strength.
Bolts right on excellent instructions
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.