Torklift Tie Downs # TLF2012 and TLF3004 for Ford F-250

Question

Question:

I have purchased a truck camper that the owner has given me the Fast Gun tie downs and the Torklift extension tubes and a bunch of hardware. Am I able to purchase only the Torklift frame brackets, as it would be a waste to have to purchase the complete kit. Thanks for your help.

asked by: Dale W

0

Expert Reply:

The Torklift Tie Downs part # TLF3004 and # TLF2012 are sold as complete kits and do not have replacement parts sold for them. With either kit though you'll be able to use the Fast Guns so you wouldn't be replacing everything that you have currently.

expert reply by: Jameson C

0

Answer 1

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 2

The quick connect fitting part #PF247007 is the standard size for hose quick disconnects so it would easily work for you as what you have would also be the same.

view full answer...

Answer 3

Yes, the quick connect end of the D&W Inc. RV and Marine Quick Connect Garden Hose Adapter item #PF247007 is 1/2" in diameter and will fit in a 1/2" female quick connect port on the Empire Faucets Exterior RV Showers item…

view full answer...

Answer 4

If your 2007 Ford F-350 Super Duty has an 8 foot bed, does not have any board or step underneath the truck bed, and is equipped with the factory hitch, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2011 (for the front) and…

view full answer...

Answer 5

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 6

The Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs item #TDHP are going to be the shortest option we carry. With the hooks on the turnbuckle portion out from the inside of one hook to the inside of the other hook is 12". The minimum…

view full answer...

Answer 7

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 8

The F2032 you're looking for is under part #TL87CR on our website and would be the correct fit for your 2024 Ford F-350. For the rear tie-downs you'll need part #TLF3008. To complete the setup you can use the TorkLift AnchorGuard Derringer…

view full answer...

Answer 9

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

I attached a couple pictures that I took from the install instructions for the Torklift Tie Down part #TLF2012 that you have that shows how all of the brackets bolt together. Hopefully that answers your question about how the plates all bolt…

view full answer...

Answer 12

For your 2008 Ford F-250 with a 6-3/4' bed you'll need the TorkLift Camper Tie-Downs - Front #TLF2012 and Rear #TLF3004. If you have running boards or steps that extend under the bed then you'll need to remove them in order to fit the…

view full answer...

Torklift Tie Downs # TLF2012 and TLF3004 for Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching