Is there Any Drilling Required to Install the Malone Axis Load Roller # MAL52VR?

Question

Question:

If I want to add the Malone Axis roller at a later date do holes have to be drilled in the end uprights to accommodate it?

asked by: Dave A

0

Expert Reply:

No, there is no drilling required to install any component of the Malone Axis Truck Bed and Roof Load Extender with Load Roller - 2" Hitches # MAL32VR or just the Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long # MAL52VR.

I went ahead and attached a video that shows the pre-drilled holes on the uprights to install the rollers at timestamp 13:30.

expert reply by: Bob C

0

Answer 1

Unfortunately Malone does not offer a replacement U-bolt and mounting plate kit for the Tongue Mounted Crossbar for Malone MicroSport Trailers - 78" Long #MPG4002. Your best bet is to go to your local hardware and find some U-bolts of the…

view full answer...

Answer 2

The Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long, part #MAL52VR, that comes with the Malone Axis Truck Bed and Roof Load Extender with Load Roller, part #MAL32VR, is fixed in length. It does not extend in…

view full answer...

Answer 3

It doesn't look like there is an option to get the 13' Malone MicroSport Trailer #MPG460G and the Tongue Mounted Crossbar #MPG4002 with 58" long crossbars instead of the 78" long crossbars unfortunately. On the…

view full answer...

Answer 4

The Tongue Mounted Crossbar for Malone MicroSport Trailers part #MPG4002 will physically fit the Malone EcoLight Sport Trailer part #MAL53FR but you'll need to trim the upright height and crossbar length. The Malone MicroSport the crossbar…

view full answer...

Answer 5

It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that…

view full answer...

Answer 6

It's probably not the best way to transport a kayak on a 2015 Honda CR-V but it's also not the worst. The Malone Axis Truck Bed and Roof Load Extender with Load Roller part #MAL32VR should work fine for what you're wanting…

view full answer...

Answer 7

The Malone Load Extender part #MAL32VR that you referenced does not have ability to angle back like the Rhino Rack T-Load part #RTL002 has so your best option would be to go with the Rhino Rack.

view full answer...

Answer 8

The Malone Axis Truck Bed and Roof Load Extender with Load Roller #MAL32VR has multiple height settings to allow it to be both a bed extender or roof rack extension. If you tilt the extender up at the connection point closest to the trailer hitch…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...