Overall Dimensions of the Hangers in Single-Axle Trailer Hanger Kit APS1
Question:
What are the overall dimensions Linch x Winch x H for each of the hangers front and Rear included in the APS1 kit?
asked by: Edward G
0
Expert Reply:
I went out to the warehouse and pulled hanger kit # APS1 to measure the hangers for you. The larger hangers measure 3 inches long, 2-5/16 inches wide, and 2-1/8 inches tall overall.
The smaller hangers are 2-1/8 inches long, 1-13/16 inches wide, and 1-1/2 inches tall overall. On the smaller hanger the shackle straps attach to the outsides of the hangers.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
more information >
Continue Researching
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Q&A: Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle
- Q&A: Does Shackle Strap Need to be at an Angle With 26" Leaf Spring Installed
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: 26 Inch Leaf Spring With at Least 3 Leaves For 3,200 lb Axles
- Q&A: Replacement Leaf Springs for a Vintage Camper
- Q&A: Can Leaf Spring # e22YR be Used with Square Axle Trailer
- Article: Trailer Tire Sizing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height