Summer Starts Here - Save up to 70%
This kit offers a fast, safe, and easy way to secure ladders to trees, poles, and other structures. Includes 2 E-track tie-down anchors, 1 E-strap with built-in cam buckle, and hardware. 3,000 lbs Max load.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the Snap-Loc E-track Tie down anchors with the included Cam buckle ladder safety strap.Now this kit is designed to let you secure a ladder to a tree or pole, providing extra security when using your ladders. Basically, the anchors are designed to mount to your ladder and then you can attach the strap to one side, loop it around the tree or the pole and then attach the other anchor to the other side where the E-track would be and hook it and then pull out any slack which would secure the ladder to a tree or to a pole.It comes with two zinc E-track anchors, one E-strap with the Cam buckle design and then it comes with your hardware, so you get four carriage bolts, four flat washers and four locknuts.Now the anchors are made from thick, ten gauge steel with a durable zinc plated finish to resist rusting corrosion. Each one measures 5 3/4 inches long by one inch wide by 1/2 inch deep. The holes measure 5/16 by 5/16 and they're separated on five inch centers. The strap is made of rigid polyester webbing with the built in zinc plated Cam buckle and the built in zinc plated E-track fittings. These fittings are designed to easily secure inside the anchors.
It's got the quick release, so you lift up on the lever and you can easily detach it. These anchors can be used or they will accept standard E-track fittings as well, other accessories.The strap measures two inches wide by eight feet long and it has a sewn on hook and loop fastener for easy storage. Also, you can use this to secure any of your excess strap, so if you have excess strap, place it in here, bring it over and it'll secure it safely out of the way.Overall it's a really nice design. Very easy to use. The Cam buckle right here is really nice as well to pull out the slack or to tighten the strap.
All you gotta do is pull on this end and then to loosen it, you press the release lever, give the strap a tug on that end and that's going to loosen your strap.The maximum load or break strength rating is 3000 pounds. Safe working load limit is 1000 pounds and the product's made in the USA.That's going to do it for today's look at the Snap-Loc E-Track Tie-Down Anchors with the included Cam buckle ladder safety strap.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.