LED Trailer Turn Signal - Submersible - 11 Diodes - Amber Lens

Video Transcript for Review of Peterson Trailer Lights - Tail Lights - PE48CR

Ellen: Hey everyone. I'm Ellen here at etrailer.com and we're going to be taking a look at the LED trailer turn signal. So this is going to be a nice clearance light, turn signal for your trailer. It gives you a nice clear indication for other vehicles to see what you're doing and make sure that everybody is staying safe out on the road. The thing that I like about this is that it is a submersible sealed LED light, so that means that it's going to last for a long time. We can use it in just about any kind of situation, whether that's a marine trailer, enclosed trailer, something that maybe is even going a little off the road, because it also has potting material in here to make sure that it's very durable as well.

So nice, long-lasting, good looking little light that should be a great addition to your trailer.You can see we'll have our diodes here. Those are going to be white LEDs with that amber lens over the top to give it that amber color. We'll turn the lights out in the studio. You can see how bright that light is, even pulling it away at arms length for me, still pretty bright, so it should be a good addition and be very visible while you're out on the road. If you're using this as a turn signal, still going to be nice and bright for you.

Turn our lights back on.This is compatible with both 12 volt and 24 volt systems, DC systems. As far as measurements, it's about 5-1/2 inches long, maybe just under 5-1/2 inches, at 5-5/16, or excuse me, about just over 5-1/4 inch, at 5-5/16. And then width is about 3-7/16, so just under 3-1/2 inches. Thickness is about 1-3/8. So it should fit into a 5-1/2 inch wide by 3-9/16 inch tall grommet hole.

Does not come with a grommet, but you can find those here at etrailer.com. Our wiring pigtail coming off the back there measures about 12 inches long, has a total of 11 diodes and has a limited lifetime warranty. And that's about all there is to it for our look at the LED trailer turn signal.This does have the housing and the lens are a polycarbonate, so again should be nice and durable for a long time. I hope this has answered all of your questions about this light and hopefully this is the right one for you. But if not, we do have a lot of other options here at etrailer.com so check them out and thanks for watching..