3-13/16" x 1-1/4". Waterproof, LED trailer light serves as a side marker light or a clearance light. Pirhana series combines modern design with vibrant lighting. Surface mount with bracket (sold separately). Accepts 2-wire plug. P2 rated.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Grote # G1902 and 47092
Truck-Lite # 19032R
Optronics # MCL65RB
Maxxima # M20350R
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the Peterson Piranha LED red clearance or side marker light. This rectangular trailer light functions as both a clearance light and a side marker light for your trailer. Has a nice sealed design so it does a great job at keeping out dirt and moisture.It's an LED unit so it makes a great replacement for incandescent lights. LED's, they last longer, they burn brighter, they're more efficient. You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.It mounts on the surface of a trailer with a bracket. Your bracket is sold separately.
It's available at etrailer.com and then it accepts the female marker light plug from Peterson, which is also sold separately and available at etrailer.com.It's Department of Transportation compliant. When it comes to the measurements of the unit, take a look at that and then we'll hook it up to power. We're looking at about three, and if we're going edge to edge, we're looking at about three and 13/16ths of an inch. Edge to edge going in this direction it's about an inch and a quarter, and the depth, just measuring the actual lens and housing area, it's about 13/16ths of an inch deep.All right, we'll go and hook it up to power. Turn off our our overhead lights so you can see it in a low light setting.
So you can see here, it sends out a really nice clear, consistent signal. It has a multi diode design, so that means that it has four LED's. So the multi diode design really helps optimize the overall light output. It's a very bright design, very visible, nice and easy to see.I do want to point out that the rated input voltage for this unit is nine volt to 16 volt DC.That's going to do it for today's look at the Peterson Piranha LED red clearance or side marker light.
Average Customer Rating: 4.8 out of 5 stars (275 Customer Reviews)
3-13/16" x 1-1/4". Waterproof, LED trailer light serves as a side marker light or a clearance light. Pirhana series combines modern design with vibrant lighting. Surface mount with bracket (sold separately). Accepts 2-wire plug. P2 rated.Thank you thank you
Perfect fit
These are far better than the bland factory lights and are sealed very well.
The lights worked great for our Timpte hopper trailer.
Easy to install and fit holes from previous installation.
Not sure its anyones fault but the LED marker lights on my trailer fasten to the wall with screws and today that style is not made as it was in 2017...So i am rating the lights "average" cause till i open the light up without busting it I got to make it work and your lights are just the same as the rest...lights look fine and i will let you know how it works out...
Order 2 of theses paid extra for shipping , and they don't match each other dame part number , tried to return them wad going to cost me more thank just keeping the wrong parts does not match pictures on website
Good service fast shipping
came quick and was an exact match
These lights were the perfect brightness, very rugged, and easy to install inside protected areas of the frame on the updated raft trailer. etrailer has great selection, the website makes it easy to find the best parts for the job, and their communication is excellent. Their videos and reviews are invaluable.
Just starting using you guys and the service, website and deliveries have been great. Keep up the great work.
The 168R side marker light paired with the B168-18 mounting gasket were easy to mount and work perfectly.
The parts was the right size and on time thanks!
Better than the ones that came with the trailer.
Fast service and great communication
ACCURATE PART DESCRIPTION AND FAST SHIP PING
Exact replacement for my trailer. The factory incandescent bulbs had faded and connections were failing. With a quick inspection with a multi meter I found that all the lamp bases checked out.
I installed this Amber and Red marker lamps through out the whole trailer. I now “glow” going down the road at night. I highly recommend these replacement lamps.
Your products have never failed me…Been doing business for years….However, beyond your control, usps shipping is ridiculous….10 days from ordering to delivery…glad I wasn’t in a hurry!
Perfect for the job. Easy install, bright light, everything you need.
Excellent service as usual. Always great service and great products.
I think etrailer should have sent plugs with lights!
I was looking for a certain size to fit the existing cutouts on my trailer and I was able to find the one I needed because you guys listed the size. Great idea.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.