Peterson Conspicuity Reflective Tape - 7" Long White/ 11" Long Red - (4) 18" Strips
(84 reviews)
Price: $12.02
In Stock
Peterson Conspicuity Reflective Tape - 7" Long White/ 11" Long Red - (4) 18" Strips
Item # 465-4K
Our Price: $12.02
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (84)
- Q & A (0)
- Videos (2)
- Photos
Peterson Trailer Lights - 465-4K
- Reflectors
- Rectangle
- Red and White
- 18L x 2W Inch
- Adhesive Mount
- Peterson
18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.
Features:
- Alternating red/silver reflector tape makes your truck or trailer more visible in low light
- 7" Silver/11" red pattern
- High-brightness reflective material provides wider viewing angles and greater visibility at long range than conventional conspicuity reflectors
- Industrial-strength adhesive backing for easy mounting
- Easily applies to flat or curved surfaces
- Made in the USA
Specs:
- Quantity: 4 strips
- Dimensions: 18" long x 2" wide
- Candle power: 600
465-4K Peterson Reflective Marking Tape - 7" Long White/ 11" Long Red - (4) 18" Strips
Video of Peterson Conspicuity Reflective Tape - 7" Long White/ 11" Long Red - (4) 18" Strips
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Peterson Conspicuity Reflective Tape Review
Hi, everyone, Aiden here with etrailer, and today we're gonna be taking a look at this conspicuity tape from Peterson. It's gonna be a reflective tape for your trailers, and depending on your local laws, you always wanna check those, this is required for safe hauling, and just to increase visibility on your trailer. We're gonna be showing you how to remove and replace a strip of this. These come in a kit of four strips, so if you're going to replace one on your trailer, it's gonna be great for you. So right here is the piece on our trailer that's certain to come up, so we're gonna go ahead and remove this and replace it with a new strip. The one we have today is 18" long from end to end, so it's a bit longer than our strip right here that's coming apart, but we can line up this white edge pretty okay right here and this'll make a solid replacement just to make sure we're still staying compliant with our local laws.
Just gonna go ahead and set that to the side and peel this one off right here. So we've got our surface mostly clean here, peeled back as much of the sticker as we could. It's pretty strong adhesive, so there is gonna be some residue left, but we'll come back through here, spray it down with some cleaning solution and get the surface as clean as we can with what we have left. Then we'll come back through with a fresh shop towel and make sure everything is perfectly dry here, because we don't want any moisture getting trapped underneath. Once you're happy with how clean the surface is, you can get your new reflective tape sticker.
We've got a strip here in the middle where we can peel back the backing very carefully there and line it up as best we can. We want this to go all the way to the edge and be level throughout. So right about there looks good. We'll try to stick that down as flat as we can and come back through with a tool here to try and remove any sort of air bubbles we might have underneath, again, just to make sure that that adhesive is sticking nice and strong to the side of our trailer. I will come back through with a grader knife here.
There's a little gap right there between the panels of our trailer. So I'm just gonna do a very careful slit down the side right there, just to make sure it's flat right there between the panels and then they can come back and peel the rest of the backing off and repeat that process of carefully applying that to the trailer here, making sure it stays level throughout. As far as replacing that reflective tape goes, that's about all there is to it. If you are doing this along the whole length of your trailer, maybe you've got a new trailer that you're setting up or rebuilding one, I would recommend maybe going with the large rolls of this tape that you can get, and cut to your exact length. That's gonna be better for larger applications like a whole trailer, but if you're just replacing, this is gonna do the trick just fine.
That'll do it. Thanks for watching..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Peterson Conspicuity Reflective Tape - 7" Long White/ 11" Long Red - (4) 18" Strips - 465-4K
Average Customer Rating: 4.8 out of 5 stars (84 Customer Reviews)
18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.by: Will 05/10/2024
Seems to be high-quality reflective tape and the adhesive also seems appropriate. Time will tell but I'm pleased with the initial install.
by: 02/20/2024
Very high quality. I'm plan on adding them to my new Yakima Hitch-mounted bike rack for some extra protection.
by: Ronnie 03/07/2024
Haven't installed the jack yet, but it seems to be a quality product. Great service from e-trailer.
by: Stacey12/09/2023
I think we should have ordered these many years ago. Amazing how just a little extra item can be appreciated at the beginning of and end at unloading time can make the day that much more pleasant. A real pain in the back saver/muscle relaxer. 11#'s of lift effort vs 58#. Why waste the energy doing 58 times two ramps 2 to 10 times a day when you don't have to?
by: James06/15/2022
A little pricey wherever you find these, but tons of uses where you need extra visibility. I used it on the rear of my utility trailer and to hillbilly some rusty chrome on the rear shocks of my classic Honda trail bike!
by: Dennis 12/16/2023
Good adhesion and very reflective. Perf ect
by: Roxeann06/21/2022
I cut them in smaller strips to fit on luggage carrier. I put the on the bottom (for when the carrier is folded up) and on the and on the rear (for when the carrier is in use). Very easy to apply. Looks great. Will use some on my bike rack also.
by: Wayne01/01/2024
Product was high quality, arrived quickly and worked well!
by: Aleta08/17/2023
Great fast service, always have what I need...thanks so much.
by: Douglas09/26/2020
Worked Great, Added them to a motorcycle trailer I am building..
by: Ignacio11/02/2023
Great prices quality items
by: Jw03/15/2022
Just what i was looking for at a reasonable price.
Jw
3/15/2023
A year later, the tape is still adhering with no problems.
by: Dan 12/06/2020
Highly reflective, extremely easy install. My trailer isn't very reflective so this makes it a LOT more visible at night for very little money and very little effort. Good stuff.
Dan
12/7/2021
Works great. Makes my trailer much more visible at night. Is holding up well so far.
by: Edwin 04/15/2023
It's still on.
by: Christoph11/14/2020
Terrific add to trailer and longer-than-trailer sail boat (easily attaches to the rear of the boat cover). Worth the small investment.
by: Ronald 04/20/2021
Good quality and stuck well to the trai ler
Ronald
4/21/2022
Still look great and holding up just fine. Really light up the trailer at night.
by: Nelson12/24/2019
Great stickers, very visible
Nelson
12/25/2020
Worked great ,easy to install
by: Kenneth03/24/2022
Extra bright. Illuminates trailer where there is no sidemarkers.
by: Cory05/17/2022
Fit perfectly on our cargo carrier frame. No problems.
by: Ranger110/02/2020
Great reflective tape at great price! etrailer is the place to shop and very fast shipping!
by: Mike11/18/2022
These are superior to those I ordered on [online]. These were put on and have not come off. The quality is great.
by: Barry 02/11/2023
Works very well
by: Harry 05/16/2020
Highly reflective etrailer offers the best products and great advice Thanks
by: Garth09/28/2022
fit my van perfectly and the quality of the build and finish was excellent
25
84
Show More Reviews
See what our Experts say about this Peterson Trailer Lights
- Can LED Trailer Stop, Turn, and Tail Lights be Installed on Guide Posts on a Boat TrailerTechnically you could install LED tail light # STL78RB wherever you wanted. I haven't seen stop, tail, and turn lights on guide posts but I'm sure it can be done. If you just want lights on the guide posts to make them easier to see then there are lights just for that, # CE27656A. They fit on 2 inch diameter posts. You might also be interested in some conspicuity tape such as # 465-4K.
view full answer... - Reflector Recommendation for the 23x59 Stromberg Carlson Cargo CarrierThe existing holes on the 23x59 Stromberg Carlson Cargo Carrier # CC-100 are actually meant for the tie-down hooks and aren't really designed for reflectors. I recommend keeping those holes open for the tie-downs and using reflective tape # 465-4K to increase visibility of the rack. Reflective tape will be just as effective as reflective pieces inserted into those openings.
view full answer... - Is There an 8" Red Reflector With Adhesive Backing? We go from the 4" Reflector # RE52RB to the 12" Reflector # RFL-12R you found. We do have Reflective Tape # 465-4K you could cut to the 8" length you are wanting as well.
view full answer... - Is 2004 Subaru Forester Trailer Wiring Harness Strong Enough for Yakima Rack and Roller TrailerIf your Yakima Rack and Roll trailer was made after October 2010 then that would mean it has LED lights on it. LED lights draw very little power compared to incandescent lights and using them and 2 additional lights are well within the abilities of the trailer wiring harness on your 2004 Subaru Forester Turbo. Even if the lights were not LED, the lights on older versions of the Rack and Roll trailers would likely not be enough power draw to be a problem, even considering adding 2 more...
view full answer... - Can Reflectors Be Added to the 19x47Curt Cargo CarrierThis reflective tape # 465-4K would be a great addition to the 19x47 Curt Cargo Carrier part # C18110. You could also drill into the carrier to install plastic reflectors like part # RE15RK. You might could intall the # RE15RK with some long zip ties instead of drilling.
view full answer... - Does Optronics LED Clearance or Side Marker Light # 00212336P have a ReflectorFrom a legal standpoint Optronics LED Clearance or Side Marker Light # 00212336P would not meet any reflector requirements. If you like this light though you can get a separate reflector. I have included a link to the reflector-only options that we carry. To help with the look you might consider conspicuity tape such as # 465-4K.
view full answer... - Does Miro-Flex LED Trailer Tail Light # STL23CCRB Have ReflectorThe trailer taillight part # STL23CCRB does not have a reflector built into it but you could add reflective tape part # 465-4K with it and you'd have the reflector portion covered as well.
view full answer... - Recommended Reflector to Add to the Thule Hitching Post Pro # TH934XTRThere are no reflectors that come with, or are made specifically for the Thule Hitching Post Pro # TH934XTR, but that doesn't mean you cannot add some yourself. The Oralite Reflector # RT21RB that you referenced is definitely an option. You could also use Conspicuity Tape # 465-4K as well to make the bike rack much more visible. Really any stick-on reflective gear will do the trick.
view full answer... - Recommended Bike Rack for Class I Hitch on 2018 Hyundai SonataI'd recommend you go with a platform type rack, as they are easier to load than the hanging style racks. My favorite reasonably priced platform-style rack is the Hollywood Racks Trail Rider, part # HR200Z. The rack can handle wheelbases up to 60 inches, and includes the hitch lock. It also provides lockable ratcheting hooks to hold the bikes in place. The center mast will fold rearward for easier access to the vehicle's cargo area. Please see the product description video I've linked...
view full answer... - Is It Okay To Travel With Cargo Carrier Folded Down and EmptyYou absolutely can travel with the cargo carrier folded down and empty. Some cargo carries like the Curt # C18151 has reflectors built into the back face, so it'll be easily visible from behind even at night. Just don't forget it's back there when you back the vehicle. If your carrier doesn't have reflectors on it, we offer Conspicuity Tape like part # 465-4K that you could apply to a clean, flat surface on the carrier.
view full answer... - If Mounted on Pickup Truck will Carrier Swing Out Enough to Lower Tailgate?The Yakima EXO Swing Away Enclosed Cargo Carrier will swing out and to the side of your truck. You can see this in the review video. Your tailgate should be able to open. Finally, if it were me, I would use some Peterson # 465-4K reflective tape on the sides and rear-facing sides of the carrier for extra visibility.
view full answer... - Are There Compatible Reflectors For The Reese Caro Carrier # 63153 We don't currently have reflectors that will match the size of the Light Kit # 20174 for the 24x60 Reese Cargo Carrier # 63153. We do carry reflective tape # 465-4K that could be placed on the frame of the basket and trimmed down to add some more visibility to your carrier.
view full answer... - How to Increase Visibility of the Fulton Boat Guide # FGB1500100The Fulton Boat Guide, part # FGB1500100, does not have a light on the top of the poles. If you want the lights we have the CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers - 40" Tall - 1 Pair # CE27740. To add just the lights you can use LED Light Kit for Post-Style Boat Guide-Ons # CE27656A. To increase visibility you could put Conspicuity Tape, part # 465-4K, on the upright poles of the Fulton Boat Guides.
view full answer... - Measurement Distance Between the Mounting Holes on the Red Conspicuity ReflectorThe measurement of the mounting holes on the Red Conspicuity Reflector # RFL-12R are taken from center of the hole to center of the hole. The measurement is 7-7/8" apart center on center. The only other type of conspicuity reflector we have is the tape style like the Peterson Conspicuity Reflective Tape # 465-4K. If you wanted to tell me more about what your needs are, I would be happy to look further into this for you.
view full answer... - Recommended Lights to Increase Visibility on Hitch-Mounted Bike RackThe Optronics Sealed, Streamline LED Trailer Light # STL79RB referenced in your question will work to provide an additional light on your bike rack, however there may be easier options. You might have trouble mounting the light assembly to the rack itself and the 3-wire design will not allow for easy disconnect when you are not using the bike rack. For an easier option, I recommend looking at the LED Light Kit # 98174LED. You can easily mount these to your bike by using the Mounting Bracket...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Andrew K
Installed by:
Jeff D
Video Edited:
Jacob T
Edited by:
Daron K
Written by:
Brian T
Video by:
Aidan B
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
6/18/2023
Still stuck to where I put them!