Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
5-5/16" x 3-7/16" Rectangle. Waterproof trailer light serves 3 functions: brake, tail, and turn signal light. Durable polycarbonate housing and acrylic lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (A45PB - sold separately).
Recessed-mount trailer lights install underneath a housing or a grommet (A33GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number STL33RB. This is the Optronics Sealed Flush-Mounted Tall Rectangle LED trailer light. The red rectangular light is going to serve three functions, such as your stop, turn and tail light. It's going to feature a sealed waterproof housing, as well as a sealed and waterproof lens unit. It's going to feature a corrosion-resistant design, 12 LEDs or Light Emitting Diodes. LEDs are a great system to have in place.
They're going to burn brighter, they're going to use less power, they're going to have a quicker activation when compared to incandescent lights. You also don't have to worry about replacing any bulbs or brittle filaments. Here on the back side, you can see that it has a three-prong connection. This is going to accept your industry-standard three-prong plug. That's going to be sold separately. You can find that here at etrailer.com using part number A45PB.
This is a flush-mount design. It's going to need the mounting grommet, which is going to be sold separately as well. You can find that here at etrailer.com with part number A33GB. If we take a look at the overall dimensions, it's going to give us an overall length of 5 and 5/16ths of an inch, an overall width of 3 and 7/16ths of an inch, and then an overall depth of 1 and 15/16ths of an inch. This light is going to draw 0.405 and .038 amps at 12.8 volts, and it is Department of Transportation approved. I want to go ahead and plug it into our external power source. That way you can see what it looks like with power running to it.
Three-prong connection goes in this slot back here, line up the plug and then just push it into place. You can see how it creates a nice tight seal around those connection points. This is going to be the tail light function. When we apply our brakes, you can see how that illuminates for a brighter signal, and it's also going to do that when we activate our turn signal. That's going to do it for today's review of part number STL33RB. This is the Optronics Sealed Flush-Mounted Tall Rectangle LED trailer light.
.
Average Customer Rating: 4.8 out of 5 stars (23 Customer Reviews)
5-5/16" x 3-7/16" Rectangle. Waterproof trailer light serves 3 functions: brake, tail, and turn signal light. Durable polycarbonate housing and acrylic lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.You have the needed items in stock. Your shipping was fast.
Replaced all the LED lights on my Aluma M10 trailer. Everyone of the lights exact replacements for what was on there. I am a repeat customer because of the Customer Service and quality of items that etrailer.com provides.
Easy to find, good price and quick shipping. Fits and works fine. The only thing stopping me from giving it 5 stars was that the picture shows the light’s connection as being recessed (what my old one was) but this one’s connection protruded. I don’t have a lot of room behind the light. I was able to make it work, but would have preferred it to be recessed as was shown in the picture on the web site.
Gary
7/22/2019
Still working. A good purchase.
15 year old enclosed trailer with dual rear lights (tail/brake/turn) on each side, old incandescent type. One light finally went out, sealed so no bulb replacement possible. Found etrailer via web search, ordered light that appeared to have same/similar dimensions and same 3-prong connector. Fit trailer perfectly, including fitting into rubber surround/mount, and existing connector - no wiring change required, totally plug-and-play. LED is so much brighter and looks so much better, now ordering three more to replace the rest of the old lights. Nice product.
Direct replacement for my tail lights on my Aluma Car trailer
The lights fit my C & M Truck Flatbed perfectly. The LEDs are brighter than the OEM and enhance the truck's appearance.
Qua;ity part. It was a replacement for a failed tail light. It still works.
Had a hard time locating this tail light online. This was the only company that carried it! Package came in great shape. Item exactly as ordered. Reasonable shipping time to Canada.
Perfect fit and working great.
Looks to be a perfect fit. Fast shippin g!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kenneth
5/20/2024
Still working perfectly! Absolutely no issue. Great product.