Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-5/16" Round. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens set inside clear lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing is sonically sealed, which means that water will not get into the light and damage the diodes or circuit board.
Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (11 Customer Reviews)
4-5/16" Round. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens set inside clear lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.These are bright LED lights, and having the LED back-up light in the center makes hookup very easy. The only problem I had was mounting the STL201RB light in the A45GB rubber grommet with the BK45BB mounting bracket. I tried following the etrailer videos with no success--in fact I was pressing on the light so hard in an attempt to insert it in the rubber grommet and mounting bracket that I was afraid I would break the light. So I decided to try a different approach. I mounted the grommet in the bracket (easy part), then immersed that assembly into near boiling water for about 10-15 minutes. This softened the rubber grommet sufficiently such that inserting the LED light into the softened grommet was now very easy. I used heavy gloves while assembling it, and rubbed a bar of hand soap around the inside mounting surface of the grommet just before inserting the LED light. Really worked well---just need to take caution when handling the very hot bracket and grommet assembly right out of the hot water bath. The attached picture shows one of the LED light assemblies, with associated wiring, just prior to checking out the electrical hookups to make sure the wiring was done correctly. The other picture shows the round LED light along with a small red LED side marker light after installation.
I ordered the STL101RB Trailer Tail Light - Stop, Tail, Turn, Backup - LED to replace the standard tail lights on my Yamah Drive G19 golf cart. They replaced to stock ones perfectly as a neat way to add a backup lights for a custom feature. The backups led are actuated by the reverse switch on the dash.
It should be noted that the ground terminal on the two wire pigtail connection is not wired internally to the backup LEDs. They rely on the ground supplied by the three wire pigtail. Not a big deal, but worth noting. It throws a curve when bench testing.
These lamps add a nice custom touch!
These lights are awesome. They are brighter than the LED's that where in my truck and the built in back up lights are very bright also. No cutting wires, just plugged them in. I have photos but it won't let me down load them. 5 Stars. I will order from etrailer the next time I need lighting. Thanks again.
These were a great option for the limited space available on my trailer. I find myself pulling my trailer at night frequently, and I'm not sure how I made it so long without reverse lights.
Red lights woulda been cooler if they had cane with the grommets but either way they look and work great in my Jeep Tj.
Light arrived on time and as described.
Item arrived in as described condition, packaged well and order complete. It's going to make a nice finish to my CJ7 project.
they work great for the project im buil ding
Love them
Just what my Husband wanted! Thank you
ok
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron S.
8/5/2018
These lights are really tough-one of the vertical PVC poles that they were mounted to came out of its holding fixture while on a highway trip-the light and the side marker light were drug along the roadway for about 100 yards before I realized what had happened and stopped. Amazingly, they continued to work great, just banged them up a bit!!! These lights are tough!!