Summer Starts Here - Save up to 70%
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flush mount with built-in flange for a finished look. 14 Diodes.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Optronics Oval Fusion LED Hardwired Stop Tail Turn and Backup Trailer Light. Now this oval trailer tail light has a nice, smooth bright red outer band, which will serve four functions. And I do have this hooked up to some 12 volt power just to show you those functions. So we're first gonna turn on your 12 volt power and you can see when we initially turn it on you're gonna see the tail light function which means the outer band of red LEDs will light up. I'm gonna go ahead and turn off the overhead light.
Now, it also offers a stop light function meaning that when you hit your brakes you'll notice the outer band of red LEDs will brighten. And then when you hit your turn signal you'll notice that it'll flash in the direction of the turn signal you're applying. And then the last function is gonna be the backup light function and that function, let me just go ahead and hook up the backup light function. And with that hooked up, you'll be able to see that when you go into reverse the LEDs the light LEDs in the center will light up to let people know that you're going into reverse. This does offer a total of 12 LEDs on this light.
Go ahead and turn off our power. It does use a sonically sealed waterproof housing and lens unit, which means it's submersible. It uses the durable SMT technology which stands for Surface Mount Technology construction of the LED circuit board. And what that means, it'll better withstand shock and vibration and allows for improved heat distribution. The LEDs are nice 'cause they'll make great replacements for incandescent lights.
They'll last 50 times longer and they're more efficient 'cause they'll provide brighter light with less power output. And of course, no bulbs to replace or brittle filaments that are gonna break. And you do get a lifetime warranty on the LEDs. We mentioned the polycarbonate lens and housing. The red lens you can see here is set inside with the white lens in the middle.
Uses red and white LEDs. The red lens with the red LEDs for the taillight as the functions we just showed you, and then the clear lens with the white LEDs for the backup light. It is a flush mount design. We just disconnect the power here. Turn it around for you. And you can see, as we mentioned, it's a flush mount design. Has this built-in black flange. Now to install this light, the hardware's not included. You would've to supply that. It is hardwire. You can see all the wires here, ready to install. Wire length is about eight and a half inches. And this slide is DOT, Department of Transportation compliant, meets the Federal Motor Vehicle Safety Standards 108 requirements for automotive lighting. Again, voltage, 12 volts. Wire configuration, if you use the black, that will connect to your taillight function. The red is for your stop and turn function. The brown is for your backup reverse lights and the white is your ground function. Last thing I'm gonna do is just give you some overall measurements on this. And we're first gonna do the overall which is gonna include the flange, if we include the flange. If we go length from one end to the other you can see is right at seven and a half inches, width, three and a quarter inches. And the total depth, including the flange is about three quarters of an inch. Now just the light itself, it's gonna be six and three eighths inches by two and one eighths inches. And the depth of just the light, not including the flange is about half an inch. But that should do it for the review on this Optronics Oval Fusion LED Hardwired Stop Tail Turn and Backup Trailer Light.
Average Customer Rating: 4.7 out of 5 stars (232 Customer Reviews)
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flush mount with built-in flange for a finished look. 14 Diodes.The order came in quicker than expected, packaged well and we are very pleased
was delivered to the wrong place but was someone that knew me and brought it to me along with another package from another vendor. but not your fault.
Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
Great addition to the rear of my Hummer H1
you were the only place that had the light I needed. ordering was easy, shipping and delivery were fast
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
Easily replaced my lights on the cargo trailer and they look great.
Works great so far no issues nice and bright not had a bulb blow out yet!
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
Great product & wonderful service.
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
Purchasing with etrailer.com was easy, quick and the product arrived when estimated. Excellent service. This light bar was exactly what we were looking for.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.