Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-15/16" Diameter round. Waterproof, incandescent trailer light serves as a side marker light and clearance light. Durable polycarbonate housing and lens. Flange mount to trailer. Accepts standard 2-prong plug. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number MC52AB. This is the sealed 2-inch round amber trailer clearance and side marker light from Optronics. It's going to feature a sealed, waterproof polycarbonate housing and lens. It's going to contain one heavy duty long-life incandescent bulb. It's a recessed flange mount that's going to mount with the three mounting holes. If we take a measurement, the distance we have between the holes, center on center, is going to be 2 and 1/4 of an inch. That's going to be the same distance between each set of holes.
Mounting hardware is not included. The size hole that you're going to need in order to get this to fit is going to give us a measurement of 2 and 1/4 of an inch in diameter, and so this would sit inside that hole, and then you would place in some screws to get it fully installed and secured. The flange itself is going to be made from a durable plastic material. It's designed to accept the industry standard two-prong plug. That's going to be sold separately. You can find it here on our website. Taking a look at the overall diameter, it's going to measure 2 and 15/16ths of an inch.
The overall depth is going to give us a measurement from the back of the housing to the outermost point of the lens, we're looking at about 1 inch. The power draw for this light is 0.2 amps at 12.8 volts, and it is Department of Transportation compliant. We're going to go ahead and hook it up to our external power source. That way you can see what it looks like with power running to it. I have a two-prong plug. It simply just goes in the female ports back here.
Push it in for a nice, tight connection. You can see here that this light sends out a really nice, consistent signal. Again, it's going to contain one heavy duty long-life incandescent bulb. The amber lens allows a lot of light to come through, and this light is completely sealed, with a nice waterproof design. That's going to do it for our review of part number MC52AB. This is the sealed 2-inch round amber trailer light from Optronics.
.
Average Customer Rating: 4.7 out of 5 stars (23 Customer Reviews)
2-15/16" Diameter round. Waterproof, incandescent trailer light serves as a side marker light and clearance light. Durable polycarbonate housing and lens. Flange mount to trailer. Accepts standard 2-prong plug. P2 rated.Well I didn't realize it was just the light with no connecting wires
Perfect fit for my 2006 ranger boat trailer and the best price I've seen. I bought two extra lights with no additional shipping cost.
Kevin
6/12/2016
Still working fine after a year.
works well!
Lowest priced 2" marker I could find, they work great.
Need 3/16 rivets
very helpful and courteous
Great product and direct replacement
Exact product replacement, fast delivery great price.
Thank you.
So far so good !!!
always great service and price
Not an easy product to find but you had it in stock, quick turnaround and consistent updates on status of delivery. Very pleased and well done.
very good product
great!
Good price. Never defective.
I"m very satisfied with the product.
Great survive and good pricing.
GREAT.
Great as always!!!!
Thanks
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/9/2023
This light will also need a wiring plug like part # A46PB to wire into the trailer.